/toy/ - Toys » Thread #11816347

[148 / 56 / ?]

Welcome to the Gunpla/Plamo General

Gelgoog Guy !!qznFQjkRiks Wed 10 Jun 2026 02:48:22 No.11816347 View View Reply Original Report

Quoted By: >>11816384 >>11825142 >>11830272 >>11834092

>"If you're new, you're gonna fuck up. Don't worry! If you're experienced, don't make the new people worry!"

***READ THE GUIDE***

Discord
https://discord.gg/W973BmwERB

The guide:
Part 1 (Quick Start)
https://docs.google.com/document/d/e/2PACX-1vSBDfE8Iz-a86DZJCR5MHRW6tjkQX-y4-ZpUc_vHjRfx_i2FB0zR1usdrgUJ4wNTs1iDFZmTQHF66X_/pub

Part 2 (Deeper Dive)
https://docs.google.com/document/d/e/2PACX-1vQJG2SZo1O1PjExPrdU_-GnkrYTGiGLCgBcKaL4peEWxOGB4CNbpGaJBV1oF61eNE1lEhbQHYEAXLrw/pub

And a handy guide to other types of plamo: http://www.mediafire.com/view/1vf1aw7v91pz5pa/Airfix%20Model%20World%20Specia%20(Scale%20Modelling%20Step-By-Step).pdf
http://www.scalemodelguide.com

Some line art:
https://imgur.com/user/Gundaml1neart/posts

Previous thread: >>11787047

Gelgoog Guy !!qznFQjkRiks

View Same Google ImgOps iqdb SauceNAO Group Build (2019_01_03 15_19_20 (...).jpg, 192KiB, 4113x583

Gelgoog Guy !!qznFQjkRiks Wed 10 Jun 2026 02:49:39 No.11816348 Report

Quoted By:

==GIRLPLA GROUPBUILD==
Build a kit featuring any brand of Girlpla, including but not limited to:
>Frame Arms Girl
>Megami Device
>30 Minute Sisters/Missions/Etc.
>Figure-Rise Standard
>Megalomaria
Additionally, any "Feminine" mechs like the Nobel Gundam or Valsione are fair game as well. What you do with your build in terms of theming is up to you so long as your base is "Feminine".

Send a description along with both WIP and Finished images of your build to [email protected]
START: 4/15/26
END: 7/31/26

Anonymous

Anonymous Wed 10 Jun 2026 03:36:42 No.11816384 Report

Quoted By: >>11816386

>>11816347
Is the "ACKS No.MP-01 Patlabor 1/43 AV-98 Ingram Type 1 + Type 98 Special Command Vehicle Set Plastic Model" a good purchase / pre-order? I've always wanted an AV-98 but could never make up my mind about which one since there are so many of them by now. Is there one that is more accurate to the actual design?

I've been too cautious in the past and end missing up on pre-orders, but I also don't like dealing with buyers' remorse, nor like having more than one item per character / mecha. Basically I'm looking for an excuse to not jump the gun and pre-order it, specially since I've cancelled one too many orders lately and might be getting close to an unfavourable standing at AmiAmi (and it's hard to cancel at HobbySearch).

Anonymous

View Same Google ImgOps iqdb SauceNAO 1780782248637506.jpg, 61KiB, 600x600

Anonymous Wed 10 Jun 2026 03:37:42 No.11816386 Report

Quoted By:

>>11816384
Forgot the pic.

Anonymous

Anonymous Wed 10 Jun 2026 13:48:32 No.11816689 Report

Quoted By: >>11816796

>>11816320
I hope so, I want to buy another and repaint it into a virus Metal.

Anonymous

Anonymous Wed 10 Jun 2026 15:45:59 No.11816796 Report

Quoted By: >>11817008

>>11816689
5$ says they do a virus ver but its p bandai

Anonymous

Anonymous Wed 10 Jun 2026 20:23:18 No.11817008 Report

Quoted By:

>>11816796
Please don't jinx it.

Anonymous

Anonymous Fri 12 Jun 2026 05:15:18 No.11818377 Report

Quoted By: >>11818432

The japanese are still seething at this something fierce >>11804986

Anonymous

View Same Google ImgOps iqdb SauceNAO 1781191390534215.jpg, 312KiB, 1080x2068

Anonymous Fri 12 Jun 2026 07:26:52 No.11818432 Report

Quoted By: >>11818579 >>11818867

>>11818377
>Oh no no no how can the Chinese robs me of waiting for another decade if not decades for my design coming into 3d form?

Anonymous

Anonymous Fri 12 Jun 2026 13:56:20 No.11818579 Report

Quoted By:

>>11818432
I like that their argument is "the author doesn't get royalties" as if bandai not releasing them gets him any royalties. Tree falling in the forest.

Anonymous

View Same Google ImgOps iqdb SauceNAO truck.png, 1MiB, 1040x646

Anonymous Fri 12 Jun 2026 16:59:53 No.11818723 Report

Quoted By: >>11818743 >>11818745 >>11819022

not really a gunpla person but this caught my interest. Are there any other vehicles or sets like it? also if I put a zaku on it will the gundam police get me?

Anonymous

Anonymous Fri 12 Jun 2026 17:35:41 No.11818743 Report

Quoted By: >>11818781

>>11818723
There's a couple for Kyokai Senki, a ground carrier and a VTOL.

Anonymous

View Same Google ImgOps iqdb SauceNAO 20230912_033127.jpg, 195KiB, 1372x1000

Anonymous Fri 12 Jun 2026 17:38:15 No.11818745 Report

Quoted By: >>11818781

>>11818723
There's also a carrier truck from another non-gundam show
https://bandai-hobby.net/item/01_3691/
>also if I put a zaku on it will the gundam police get me?
No worries as long as you don't put their competitor's toys on it...

Anonymous

Anonymous Fri 12 Jun 2026 18:12:58 No.11818781 Report

Quoted By: >>11819022

>>11818743
>>11818745
Neat, I love utilitarian, chunky functional vehicles. I also just found out there was a whole line for little simple kits (30 minute missions apparently) so I might get the truck and a mech/vehicle to go with it (rather than just slap whatever transformer I have on it that fits)
Thanks anons

Anonymous

Anonymous Fri 12 Jun 2026 18:57:39 No.11818812 Report

Quoted By: >>11818869

Are there any good sites, outside of cgtrader and cults3d, that has or sells conversion kits, detail parts, etc for 3d printing?

Anonymous

Anonymous Fri 12 Jun 2026 20:07:51 No.11818867 Report

Quoted By: >>11818977

>>11818432
Didn't the actual artist get kind of annoyed too?

Anonymous

Anonymous Fri 12 Jun 2026 20:08:52 No.11818869 Report

Quoted By: >>11818945

>>11818812
Aliexpress

Anonymous

Anonymous Fri 12 Jun 2026 21:39:58 No.11818945 Report

Quoted By: >>11819126

>>11818869
eh?

Anonymous

Anonymous Fri 12 Jun 2026 22:25:02 No.11818977 Report

Quoted By: >>11819952

>>11818867
Not gonna lie, i would be annoyed too if i was the artist, but also i would be even more annoyed at bandai for releasing a fuckload of bearguys and not give my acguy a shot.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1781304169972185.jpg, 3MiB, 4080x3072

Anonymous Fri 12 Jun 2026 22:43:49 No.11818990 Report

Quoted By: >>11822412

progress with the MG F91

Anonymous

View Same Google ImgOps iqdb SauceNAO TOhMlVls1vt1Xxjb.jpg, 323KiB, 1500x1500

Anonymous Fri 12 Jun 2026 23:28:45 No.11819022 Report

Quoted By: >>11819545 >>11820883

>>11818723
>>11818781
Pic related just came out today in Japan, should be out in the west in a month or 2.

Anonymous

View Same Google ImgOps iqdb SauceNAO Screenshot_20260613-031727_Chrome.png, 2MiB, 1080x2260

Anonymous Sat 13 Jun 2026 02:19:21 No.11819126 Report

Quoted By: >>11819129

>>11818945
You can find a lot of things like that on Aliexpress because most of them are from China anyway. That's also where I buy third party kits because they sell them for pretty much nothing too.
I'd use a burner email though, the spam is the worst.

Anonymous

Anonymous Sat 13 Jun 2026 02:20:22 No.11819129 Report

Quoted By:

>>11819126
Wait I missed the 3d printing part. In that case I don't know, maybe you can find that there too.

Anonymous

Anonymous Sat 13 Jun 2026 06:31:06 No.11819237 Report

Quoted By:

The 30mm Steel Haze kit still pretty fragile?

Anonymous

Anonymous Sat 13 Jun 2026 09:44:38 No.11819305 Report

Quoted By: >>11819412

Is RG Zaku II as much of a pain in the ass to build? I don't even care about gundam but i just kinda want a zaku.

Anonymous

Anonymous Sat 13 Jun 2026 13:52:20 No.11819412 Report

Quoted By: >>11819419

>>11819305
I know the pipe segments suck, there's a few bits that like to pop off, and if you pose it a lot the joints will get floppy because it's an early RG with a full pre-molded frame.

Anonymous

Anonymous Sat 13 Jun 2026 14:07:16 No.11819419 Report

Quoted By: >>11819538

>>11819412
Not gonna bother then. I have enough bad luck getting joints to stay still as it is.

Anonymous

Anonymous Sat 13 Jun 2026 18:22:31 No.11819538 Report

Quoted By:

>>11819419
I'd just get an HG kit

Anonymous

Anonymous Sat 13 Jun 2026 18:29:28 No.11819545 Report

Quoted By: >>11820058

>>11819022
>should be out in the west in a month or 2.
more like in a year or two.

Anonymous

Anonymous Sun 14 Jun 2026 00:18:34 No.11819829 Report

Quoted By: >>11827145

>PG Tier Laevatein kit from FMP

https://www.youtube.com/watch?v=2jhavHtewL8

holy shit

Anonymous

Anonymous Sun 14 Jun 2026 03:16:50 No.11819952 Report

Quoted By: >>11820012

>>11818977
If I was the artist I would be making my own conversion kits.
3D Printers are cheap nowadays.

Anonymous

Anonymous Sun 14 Jun 2026 05:31:28 No.11820012 Report

Quoted By:

>>11819952
Isn't he busy drawing manga for a living? I've heard that industry is pretty brutal and a considerable number of mangakas work themselves into an early grave.

Anonymous

Anonymous Sun 14 Jun 2026 07:15:21 No.11820058 Report

Quoted By:

>>11819545
>https://www.amazon.co.jp/dp/B0G2Q5B7BX/
pretty sure DHL can reach "The West" in a day or two lol

Anonymous

View Same Google ImgOps iqdb SauceNAO destroyerhole.jpg, 49KiB, 492x656

Anonymous Mon 15 Jun 2026 04:34:42 No.11820696 Report

Quoted By: >>11820747

Not sure if this or the star wars thread is the right one, but i'm still new to kits. About this gap here, is this when i should disassemble it and sand down the pegs? Or maybe glue is the solution?

Anonymous

View Same Google ImgOps iqdb SauceNAO re-make.jpg, 2MiB, 3000x3000

Anonymous Mon 15 Jun 2026 07:49:28 No.11820744 Report

Quoted By:

Let's say a part from your kit is gone and it's never coming back.
You take this opportunity to make the part more accurate to the subject, right?

Anonymous

Anonymous Mon 15 Jun 2026 07:55:43 No.11820747 Report

Quoted By: >>11821002

>>11820696
Needs seam filler. Do you plan to panel line it later? That gap probably won't stand out if you panel line

Anonymous

Anonymous Mon 15 Jun 2026 15:09:18 No.11820883 Report

Quoted By:

>>11819022
Oh that's awesome, I'll have to keep an eye out for that. Thanks anon

Anonymous

View Same Google ImgOps iqdb SauceNAO bann07886_0__80484.jpg, 367KiB, 1280x807

Anonymous Mon 15 Jun 2026 16:35:46 No.11820952 Report

Quoted By: >>11820963 >>11821006 >>11821057

How complicated would this set be? I was looking around for a simple zaku to build up, saw the thunderbolt version and really dug it, but seems it's only part of a fancy/deluxe set.
I know I should start small (built warhammer and other models for years but that was also years ago) but I'm a sucker for jetpacks, backpacks and high mobility mechs and such

Anonymous

Anonymous Mon 15 Jun 2026 16:49:01 No.11820963 Report

Quoted By: >>11821166

>>11820952
HG kits aren't complicated and you can look up the manual in Dalong.net to familiarize yourself with the kit.

Anonymous

Anonymous Mon 15 Jun 2026 18:26:17 No.11821002 Report

Quoted By: >>11821559

>>11820747
I thought about it, but I'm kinda attracted to the idea of a "clean" ship, like it just got built right? But seam filler eh, that is indeed a seam, I'll see what I can scrounge up thanks

Anonymous

Anonymous Mon 15 Jun 2026 18:36:37 No.11821006 Report

Quoted By: >>11821166

>>11820952
I thought you already decided on buying this, like a month ago

Anonymous

Anonymous Mon 15 Jun 2026 19:55:17 No.11821057 Report

Quoted By: >>11821166

>>11820952
HGs aren't complicated at all, if you have some experience you could build the whole thing in like an hour

Anonymous

Anonymous Mon 15 Jun 2026 22:39:59 No.11821166 Report

Quoted By: >>11821252

>>11820963
>>11821057
I'll take it under consideration anons, thank you.
>>11821006
Not me then just a popular set maybe? Im actually the truck anon from above, I did a little sight seeing on what stores here had for something to go on the truck, and then I saw the thunderbolt.
(Im gonna put the 30mm tank on it I think)

Anonymous

Anonymous Mon 15 Jun 2026 23:43:03 No.11821211 Report

Quoted By:

>>11814972
Was hoping you'd get an answer I have the same problem fairly often and I don't understand why. I didn't have it with double blade nippers so clearly I'm doing something wrong.

Anonymous

Anonymous Tue 16 Jun 2026 00:36:26 No.11821252 Report

Quoted By:

>>11821166
Ah, a fellow fuel tank connoisseur.

Anonymous

Anonymous Tue 16 Jun 2026 04:28:25 No.11821431 Report

Quoted By: >>11821442 >>11822178

>order a HG Gquuuux Char's Zaku
>they accidentally send a HG Char's Z'Gok
>they send out a Zaku but don't want the Z'Gok back
I mean, I got a free kit but I kind of feel bad about it.

Anonymous

Anonymous Tue 16 Jun 2026 04:45:17 No.11821442 Report

Quoted By: >>11821492

>>11821431
They value retaining a customer over short-term profits, because you getting pissed and spreading word of mouth would mean they get fewer customers in the future, whereas you telling others about the good customer service of this as-yet-unnamed vendor means they might get additional future customers (and thus increased profits).

And truth be told, eating the cost of the kit is probably better than eating the shipping cost of having you send the kit back.

Anonymous

Anonymous Tue 16 Jun 2026 05:51:41 No.11821492 Report

Quoted By: >>11822178

>>11821442
I mean, that good customer service is why I feel kind of bad. If it were amazon or something I wouldn't give two shits.

Anonymous

Anonymous Tue 16 Jun 2026 08:21:42 No.11821559 Report

Quoted By:

>>11821002
https://www.youtube.com/watch?v=Hq7960nrg4c
Try this.

Anonymous

Anonymous Tue 16 Jun 2026 12:39:21 No.11821697 Report

Quoted By: >>11821703 >>11821846

Quick question, could the Hyaku Shiki work as an RG kit?

Anonymous

Anonymous Tue 16 Jun 2026 12:46:44 No.11821703 Report

Quoted By:

>>11821697
Why shouldn't it work?

Anonymous

Anonymous Tue 16 Jun 2026 14:54:43 No.11821846 Report

Quoted By: >>11821887 >>11827599 >>11837122

>>11821697
The problem with that is that it's almost certainly going to be chrome coated, which will drive up its price like the Akatsuki. And unlike the Akatsuki, it doesn't have a huge amount of cool and flashy gimmicks to justify the price, just the Mega Bazooka Launcher which will probably be separately sold as P-Bandai.

Bandai has proven that they're willing to make RG kits for nostalgia's sake (as they recently released the RG Shining to minimal fanfare), and Zeta ranks pretty high when it comes to UC love (though still below CCA and Unicorn). So I'd say the chances of a RG Hyaku-Shiki are pretty high, though it'll probably cost a pretty penny. Bandai already tried to cut costs on the Akatsuki by issuing it with the Strike frame, and it still costs a metric fuckton. The Hyaku-Shiki would have to be built from the ground-up unless they pull the same bullshit they did with the Sinanju and re-use an existing RG frame.

Anonymous

Anonymous Tue 16 Jun 2026 15:38:39 No.11821887 Report

Quoted By: >>11821896

>>11821846
Also, the chrome plating adds weight, which led to disastrous results in the RG Akatsuki's MS Joints reused from the nearly old enough to post RG Strike Gundam. When Bandai uses chrome plating on the RG Shiki, they better give it a sturdier than average inner frame to handle the added weight of said plating.

Anonymous

Anonymous Tue 16 Jun 2026 15:53:05 No.11821896 Report

Quoted By: >>11821900

>>11821887
>chrome plating adds weight
That sounds utterly nonsensical given that painting with metallic colors doesn't add any appreciable weight to the model and the micron-thin metallic plating should add even less material.

Anonymous

Anonymous Tue 16 Jun 2026 15:58:26 No.11821900 Report

Quoted By: >>11821906

>>11821896
I think the old rg frames are just a disaster in general, the only one that seems to hold up okay is the mk-2.

Anonymous

Anonymous Tue 16 Jun 2026 16:21:44 No.11821906 Report

Quoted By:

>>11821900
Z'Gok is pretty okay too in my experience.

Anonymous

Anonymous Tue 16 Jun 2026 21:31:19 No.11822172 Report

Quoted By: >>11822210 >>11822211 >>11825282

Anyone have tips for special coating or clear version kits?
I'm going to be in Japan for two weeks and want to pick up the limited RG Epyon and Wing Zero EW kits from Gundam Base, but I'm a bit new and unsure if there's anything I should know about them first.

Anonymous

Anonymous Tue 16 Jun 2026 21:37:37 No.11822178 Report

Quoted By:

>>11821431
>>11821492
If it's any consolation, the Z'Goks aren't something absurdly expensive although they're nice kits, I don't think the store suffered a huge loss because of it

Anonymous

Anonymous Tue 16 Jun 2026 22:01:35 No.11822210 Report

Quoted By: >>11822246

>>11822172
With clear kits, you'll want a nano glass file (like a Raser or Siren) for cleaning up the nubs. I'm told the Siren is closer to a traditional steel file in how you're supposed to use it, but I've been using mine 'generally' to good effect on all my kits since getting it.

Anonymous

Anonymous Tue 16 Jun 2026 22:02:51 No.11822211 Report

Quoted By: >>11822246

>>11822172
Clear plastic is significantly more brittle than regular plastic, so you have to be quite careful cutting the pieces. The stress marks are also super obvious unless you clear the nubs with a glass file, and even then you have to give enough distance. As the super modeling anon recommended some time ago, an agate knife is super handy for removing nub stress marks.

And yeah, you'll probably have to live with not being able to color correct with paint, unless the pieces are white/true clear and you have a good collection of clear paints.

Anonymous

Anonymous Tue 16 Jun 2026 22:40:29 No.11822246 Report

Quoted By:

>>11822211
>>11822210
Thanks for the tips! I'll likely grab the HG Clear Wing instead of the RG EW one so I won't feel as bad if I mess up on it then.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1781659508199563.jpg, 3MiB, 4080x3072

Anonymous Wed 17 Jun 2026 01:26:56 No.11822412 Report

Quoted By: >>11827577

>>11818990
next step is putting some decals but it is rainy and humid as fuck so I'll wait a few days because I don't want to take that much to topcoat this thing

Anonymous

View Same Google ImgOps iqdb SauceNAO knight_kit.jpg, 192KiB, 1080x804

Anonymous Fri 19 Jun 2026 18:24:00 No.11825142 Report

Quoted By:

>>11816347
Anyone familiar with this kit and its quality?

Anonymous

Anonymous Fri 19 Jun 2026 21:44:17 No.11825282 Report

Quoted By: >>11825574

>>11822172
i built the rg wing zero ew clear an it wasnt great. quite flimsy and i managed to break shit.

Anonymous

Anonymous Fri 19 Jun 2026 22:37:40 No.11825321 Report

Quoted By: >>11825346 >>11825509 >>11827060

Hi.
Some gunpla kits have decals and some Bandai plastic kits have stickers.
Is there a particular tweezer best for removing and applying stickers? Same with applying decals to harder to reach spots?
I know finger oils can ruin the adhesive of a sticker so if I encounter them I’d like a good tweezer for the job.
I remember trying with Lego stickers and never seemed to get it right so that’s why I am asking here.

So any specific tweezers for the job or aspects of a tweezer to look out for when shopping on Amazon?

I read the OP guides and know not to build while sick or naked or both.

Anonymous

Anonymous Fri 19 Jun 2026 23:06:12 No.11825346 Report

Quoted By: >>11825493

>>11825321
https://www.amazon.com/ZHIYE-Anti-Static-Electronics-Jewelry-making-Laboratory/dp/B07RZ4MJ62
I bought these a while back and they're working pretty well for me.
I'd also use waterslide decals over what comes in the box, they look way better.

Anonymous

Anonymous Sat 20 Jun 2026 02:31:40 No.11825493 Report

Quoted By:

>>11825346
Thanks!
I was concerned the metal tips would scratch.
I’ll give them a try when they arrive.

Anonymous

Anonymous Sat 20 Jun 2026 02:50:29 No.11825509 Report

Quoted By:

>>11825321
I just used the tip of my hobby knife to slide underneath the sticker and lift it off the sheet, it's thin and sharp enough to work in the vast majority of cases.

Anonymous

Anonymous Sat 20 Jun 2026 04:58:58 No.11825574 Report

Quoted By:

>>11825282
I feel like the frame for that kit is quite fragile. Old MS Frame and whatnot.

Anonymous

Anonymous Sat 20 Jun 2026 04:59:58 No.11825575 Report

Quoted By: >>11825582 >>11825606

Does this thread hate knockoff kits?

Anonymous

Anonymous Sat 20 Jun 2026 05:27:44 No.11825582 Report

Quoted By:

>>11825575
This isn't facebook/reddit/Japan, son.
You can post whatever bootleg chinkshit from the depths of temu you want. I will not judge you for buying it.
I will however judge you for not fixing its chink tendencies.

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_20250929_121501.jpg, 4MiB, 4080x3072

Anonymous Sat 20 Jun 2026 06:10:23 No.11825606 Report

Quoted By:

>>11825575
yes bro, posting any chink bootleg will result in a boogeyman coming straight for you and punching you in the face

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_20260621_015031033.jpg, 3MiB, 4096x3072

Anonymous Sun 21 Jun 2026 13:26:10 No.11826516 Report

Quoted By:

Finally started my RGZ-91.
I've been sitting on this for over half a year now.

Anonymous

View Same Google ImgOps iqdb SauceNAO 81lmlRfOFsL._AC_SL1500_.jpg, 135KiB, 1500x1333

Anonymous Mon 22 Jun 2026 03:59:14 No.11827060 Report

Quoted By:

>>11825321
There is a particular type of tweezers (or rather tweezer tips) that doesn't stick to adhesives and is really handy for working with stickers:
https://www.amazon.co.jp/dp/B07NVWN1Q1
https://www.amazon.co.jp/dp/B07NVTJTT8

Can confirm that it is quite nice.

Anonymous

Anonymous Mon 22 Jun 2026 07:08:08 No.11827145 Report

Quoted By:

>>11819829
>No bazooka for Sagara
Trash.

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_20220823_160435~3.jpg, 1MiB, 1944x2592

Anonymous Mon 22 Jun 2026 19:11:26 No.11827480 Report

Quoted By: >>11827503 >>11827580

Here's a over weathered Messer I finished awhile back. Can I get some constructive criticism on the weathering please? Anything and everything helps

Anonymous

Anonymous Mon 22 Jun 2026 19:27:22 No.11827503 Report

Quoted By: >>11827986

>>11827480
what happened to it that got so much of the paint scratched off all at once? because if the paint got scratched off over long time some of that exposed metal should be rusting? unless it's some magic metal that doesn't oxidize? or the thing is floating in a vacuum of space? but then the scratched off paint bits should mostly be orbiting it so it should look fuzzy/furry

Anonymous

View Same Google ImgOps iqdb SauceNAO 1782161894443680.jpg, 2MiB, 4080x3072

Anonymous Mon 22 Jun 2026 21:01:24 No.11827577 Report

Quoted By: >>11827648

>>11822412
almost complete
I only need to do some touch ups to the VSBRs and this handsome fella will be complete

Anonymous

Anonymous Mon 22 Jun 2026 21:04:17 No.11827580 Report

Quoted By: >>11827986

>>11827480
a tip valuable advice I got from someone here
when doing weathering, less is more
I think you went too far with this attempt, not that it is bad, but when doing that look, it is better to be more precise and apply the wornout look in surfaces and areas that are more prone to end up like that, like edges of armor or only specific faces of certain armor plates, instead of just weathering everything, as it simply looks dirty

Anonymous

Anonymous Mon 22 Jun 2026 21:27:40 No.11827599 Report

Quoted By:

>>11821846
>and Zeta ranks pretty high when it comes to UC love
I fucking wish that were true. Anything that isn't the main trio (mk.ii, zeta, shiki) has been kicked to the curb again and again, even dijeh can't get a real MG. Titans especially haven't gotten shit. It took them 13 years after the initial HGs to give us a proper byarlant, they have *one* MG and it was a pity release with engineering from 3 years before.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1782165829422.jpg, 2MiB, 4080x3072

Anonymous Mon 22 Jun 2026 22:24:16 No.11827648 Report

Quoted By: >>11827652

>>11827577
and here is it, one of the Steel 7

Anonymous

View Same Google ImgOps iqdb SauceNAO 1782165829827.jpg, 4MiB, 4080x3072

Anonymous Mon 22 Jun 2026 22:27:23 No.11827652 Report

Quoted By: >>11827653

>>11827648

Anonymous

View Same Google ImgOps iqdb SauceNAO 1782165829372.jpg, 3MiB, 4080x3072

Anonymous Mon 22 Jun 2026 22:28:25 No.11827653 Report

Quoted By:

>>11827652
imo, looks better and more interesting that the vanilla white F91

Anonymous

Anonymous Tue 23 Jun 2026 02:57:45 No.11827986 Report

Quoted By:

>>11827503
>>11827580
Oh I most definitely went to hard with it, the idea was it is just a old beat to shit suit they are getting the most use out of it that they can because it's the only one they have. But yea, definitely went too hard on the weathering, it looks more dirty then anything like anon said

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_4704.jpg, 257KiB, 1092x1500

Anonymous Tue 23 Jun 2026 17:10:41 No.11828426 Report

Quoted By: >>11828817

Does anyone have any advice for kitbashing or modifying the joints on older kits?

Specifically like pic related or the Gundam Alex, getting more shoulder articulation and what not.

Anonymous

Anonymous Wed 24 Jun 2026 01:04:01 No.11828817 Report

Quoted By:

>>11828426
Yeah, you'll probably want to get a pre-made frame and then use knifework to cut the armor and frame down so that they can be mated together. Unless you're a god-tier scratchbuilder, you probably won't be able to accomplish it on your own, so it's better to have a good portion of the work done for you.

https://www.youtube.com/shorts/o0T3AGXcijU

Anonymous

Anonymous Wed 24 Jun 2026 23:14:11 No.11829802 Report

Quoted By:

Are there any good resources to buy just the weapons that go to some kits?

I'm after the Raketen Bazooka and the MMP-80 from the Dom Tropen, and a Gouf Shield. I've tried googling around but haven't found much.
Doesn't seem like people have a ton of spares.

Anonymous

Anonymous Thu 25 Jun 2026 03:35:04 No.11830003 Report

Quoted By: >>11830047 >>11830103

What are some good high grit glass files for stress mark removal back to the glossy plastic result?
I’m iffy on the makeup and beauty glass files for nail filing.
But at the same time I’m unsure about hobby premium ones.
How long do these glass files last anyways?

Anonymous

Anonymous Thu 25 Jun 2026 04:15:36 No.11830047 Report

Quoted By: >>11830844

>>11830003
I bought a generic pack of three off of Amazon about three years ago, and I'm still using the first one. It's definitely scratched all to hell and back, but it still works.

As for stress marks, removing those is just a matter of using a hobby knife instead of nipper to cut away remaining nub, and then filing the remainder down. If you're filing down from a nipper cut, you either want to leave at least 2mm of nub to file down from, or push down hard on the stress mark with an agate knife.

Anonymous

Anonymous Thu 25 Jun 2026 06:10:28 No.11830103 Report

Quoted By: >>11830844

>>11830003
I've used:
Dspiae siren (and the big one)
Stedi raser knock off
Gunprimer raser and origin

They all can scratch your model if you don't use them right. They all work well enough for models, but Gunprimer is by far the best and comfiest. However, they all have a learning curve.
For dspiae and standard monodirectional files: never go back and forth, only shave in one direction.
For stedi and gunprimer: You can go back and forth, but make sure to ONLY shave off nubs and stop when you get to the piece because it's super easy to scratch parts.
Also you don't need to apply force. The file itself will do all the work, in fact applying too much force (which is a very easy mistake to make) can damage your file. Not a big deal for the dspiae or stedi ones, but the raser is expensive (and worth it) enough to be protected.

Anonymous

View Same Google ImgOps iqdb SauceNAO kishin colada.jpg, 149KiB, 1000x600

Anonymous Thu 25 Jun 2026 09:27:37 No.11830155 Report

Quoted By: >>11830323 >>11830475

Anyone else getting one of these?

Anonymous

View Same Google ImgOps iqdb SauceNAO mecha.jpg, 1MiB, 2160x1620

Anonymous Thu 25 Jun 2026 14:23:21 No.11830272 Report

Quoted By:

>>11816347
Are there any model kits like the one in top pic? Not really a fan of how gundam looks and the closest I can find are the silly ducks in the bottom pic. Not pictured is the Rihio line but they are too small. I wqs hoping for maybe 6 inches. I know JoyToy exist but they feel over designed and I hear their figures are flimsy.

Anonymous

Anonymous Thu 25 Jun 2026 15:43:50 No.11830323 Report

Quoted By:

>>11830155
Yea, its gaudy as hell and over the top but i appreciate a good clusterfuck every now and again. Ordered mine from aliexpress, probably getting here mid-late july

Anonymous

Anonymous Thu 25 Jun 2026 20:14:27 No.11830475 Report

Quoted By: >>11831219

>>11830155
I can't tell what it is but fuck it next pay day I'm down.

Anonymous

Anonymous Fri 26 Jun 2026 03:39:50 No.11830844 Report

Quoted By: >>11830847

>>11830047
Thanks!
Did the pack have flat files and cylinder ones?
If so I’d like a link please.
I’ve heard of glass cuticle files and nano glass nail files but I would only get bohemian or Czech crystal glass so those didn’t seem right for gunpla sanding to a gloss polish.

>>11830103
>never go back and forth
I’ll remember that. Thank you.

Anonymous

Anonymous Fri 26 Jun 2026 03:47:56 No.11830847 Report

Quoted By:

>>11830844
I think it was this one, or something close to it.

https://www.amazon.com/ANSAI-Grinding-Polishing-Gundam-Military/dp/B09WN34KV7

In my case, I only really care that I can file the nub down to flush, since I'm going to paint over it anyway.

Anonymous

Anonymous Fri 26 Jun 2026 16:15:26 No.11831219 Report

Quoted By:

>>11830475
Look up Zack's video about it, thing is a glorious blob

Anonymous

Anonymous Sun 28 Jun 2026 01:11:03 No.11832831 Report

Quoted By: >>11832833

Now building the Mk II 2.0

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_20260627_183945.jpg, 3MiB, 4080x3072

Anonymous Sun 28 Jun 2026 01:12:04 No.11832833 Report

Quoted By: >>11835982 >>11838332 >>11838334

>>11832831

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_1007.jpg, 2MiB, 3459x5409

Anonymous Sun 28 Jun 2026 03:22:14 No.11832915 Report

Quoted By:

Haven’t painted in years. I was homeless for a minute. I am rusty as fuck.

Anonymous

View Same Google ImgOps iqdb SauceNAO 111.png, 2MiB, 1027x1692

Anonymous Mon 29 Jun 2026 04:58:08 No.11833829 Report

Quoted By:

What version of the HGUC Zeta is this? It's a JMS KO from Aliexpress but I'm trying to find the basis for the KO. The head/joint articulation sucks by design so I'm trying to find out if there are mods to improve it since it doesn't have good range of motion due to the neck collar/head design. It doesn't look like the HGUC Revive on Dalong's site.

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_20260629_222544.jpg, 2MiB, 2730x2478

Anonymous Mon 29 Jun 2026 15:26:15 No.11834092 Report

Quoted By:

>>11816347
After 2 months I finally finished my second kit. I feel like an engineer when I made his head glow up lol. I understand the appeal of this hobby now.

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_20260629_230324.jpg, 4MiB, 4000x3000

Anonymous Mon 29 Jun 2026 17:18:33 No.11834182 Report

Quoted By: >>11834255

I hope someday he becomes a real action figure. He feels brittle and light. I feel like he could kick higher if he was heavier.

Anonymous

Anonymous Mon 29 Jun 2026 19:07:28 No.11834255 Report

Quoted By: >>11834321 >>11834933

>>11834182
If you can find the space, try adding weights inside the legs (ball bearings and fishing weights are often used for that). It'll make it much more stable in standing poses. But it won't help with a kicking pose like your pic bc the weights of both legs would cancel each other.
The tradeoff is that it's more risky to put it on an action base if it gets too heavy, but most action bases aren't that fragile so it's usually fine unless the base kit is already heavy.

Anonymous

Anonymous Mon 29 Jun 2026 20:41:41 No.11834321 Report

Quoted By: >>11834933

>>11834255
>The tradeoff is that it's more risky to put it on an action base if it gets too heavy, but most action bases aren't that fragile so it's usually fine unless the base kit is already heavy.
You could always weigh down the base and reinforce the stand too.

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_20260629_231016.jpg, 2MiB, 2636x3635

Anonymous Tue 30 Jun 2026 13:37:38 No.11834933 Report

Quoted By:

>>11834255
>>11834321
>It'll make it much more stable in standing poses.
He can do standing and boxing poses just fine. I only suggested he became an action figure because it would evenly distribute the weight. The only reason the pose is hard to do is because all the weight is in the hair and no matter how much I move and bend the hair to the center. In the kicking pic I have to move the ankle rocker of the standing leg at an angle just to balance the center of gravity. The only questionable design I notice was the toe hinge. As you can see in the pic that is the max range the toe can go upward. But it can go downward alot for some reason. Really weird choice for a boxer character. I honestly dont know what kind of poses a downward toe can do.

Anyway, he's a boxer my mistake for expecting he can kick. But it would have been a lot cooler if he can. Overall I'm satsified but I am still hoping some chinese company would make a (bootleg) actual action figure out of him like Kotobukiya's Lumitea or even an official one.

Anonymous

Anonymous Wed 01 Jul 2026 19:25:53 No.11835736 Report

Quoted By: >>11835751

I wish I knew about Amazon haul ages ago, I just got like 6 stands for £8.
Not even Aliexpress had something that good.

Anonymous

Anonymous Wed 01 Jul 2026 19:53:23 No.11835751 Report

Quoted By: >>11835770

>>11835736
The clear kind? Because there are vendors that sell those individually for like $1 USD apiece, and in the bundle section you can even get free shipping and extra discount.

Anonymous

View Same Google ImgOps iqdb SauceNAO Screenshot_20260701-211303_Chrome.png, 77KiB, 1080x467

Anonymous Wed 01 Jul 2026 20:13:55 No.11835770 Report

Quoted By:

>>11835751
The very basic ones where it's just plug the stand into the base? Yeah.
Also turns out I got the price wrong.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1782951962645879.jpg, 2MiB, 4080x3072

Anonymous Thu 02 Jul 2026 00:34:46 No.11835982 Report

Quoted By: >>11835993

>>11832833
big foot
I get why the Mk II 2.0 is so praised despite its age, its inner frame seems like the exact moment when bandai hit a huge quality jump, the sliding mechanism of the legs is pretty impressive

I also dig how blocky the parts are so far

Anonymous

Anonymous Thu 02 Jul 2026 00:48:54 No.11835993 Report

Quoted By:

>>11835982
Yeah, around 2004-05ish is when MG kits started to not be utter dogshit. Stuff from before that era is more comparable to a modern-day HG or FM kit in terms of overall quality, it's hilarious how bad the old MG kits like Zeta 1.0 and The Gundam 1.5 were. Even the old MG ZZ required you to use metal screws to hold the legs together, but at least it could reliably transform into G-Fortress mode without going full hand grenade on you.

Meanwhile, my MG Mk-II AEUG has been held hostage by USAGS for like half a year due to delays (and which probably got extended even more because it was supposed to arrive Q2 but still hasn't), which in turn is holding the rest of my order hostage, including my MG FAZZ and RG Zeus Silhouette.

Anonymous

Anonymous Fri 03 Jul 2026 07:34:08 No.11837122 Report

Quoted By:

>>11821846
>released the RG Shining to minimal fanfare

What are you fucking talking about

Anonymous

Anonymous Sat 04 Jul 2026 22:15:08 No.11838332 Report

Quoted By:

MG or RG sazabi after this? I've got the waterslide decals for this zaku too.
>>11832833
Is this a more solid than the 3.0. Really not digging the 3.0 rx-78-2 look and I can't find the 2.0 in stock near me.

Anonymous

View Same Google ImgOps iqdb SauceNAO 7014.jpg, 467KiB, 1280x960

Anonymous Sat 04 Jul 2026 22:19:11 No.11838334 Report

Quoted By: >>11838365

Anonymous

View Same Google ImgOps iqdb SauceNAO 1783205863802776.jpg, 3MiB, 4080x3072

Anonymous Sat 04 Jul 2026 23:00:58 No.11838365 Report

Quoted By:

>>11838334
>Is this a more solid than the 3.0
dunno since I don't have that kit but this Mk II 2.0 is pretty rock solid

got a bit more fair progress with it, I plan to do a slight weathering with it

Anonymous

View Same Google ImgOps iqdb SauceNAO lathe2.0.jpg, 647KiB, 1600x1105

Anonymous Sun 05 Jul 2026 00:53:56 No.11838437 Report

Quoted By: >>11838439 >>11838477

What can you build with a motor, a drill chuck and some random crap off Aliexpress?

Anonymous

Anonymous Sun 05 Jul 2026 00:56:09 No.11838439 Report

Quoted By:

>>11838437
nukes

Anonymous

Anonymous Sun 05 Jul 2026 02:30:34 No.11838477 Report

Quoted By: >>11838609

>>11838437
Babby lathe?

Anonymous

Anonymous Sun 05 Jul 2026 04:58:44 No.11838609 Report

Quoted By:

>>11838477
Yeah. Which is surprisingly useful in scratch building.

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_4894.jpg, 159KiB, 2160x2160

Anonymous Tue 07 Jul 2026 02:32:57 No.11840098 Report

Quoted By:

Took some time to finally build my Gustav Karl Type 00 and it's everything I wanted when I first saw it in the first Hathaway film. Definitely glad I waited for this release.

Anonymous

View Same Google ImgOps iqdb SauceNAO dogbot.jpg, 2MiB, 2921x2213

Anonymous Tue 07 Jul 2026 04:40:27 No.11840169 Report

Quoted By:

3rd kit done. Finished in an hour. I never imagined Hemoxian made it. Articulation is simple yet the details are really good. Might get the other one.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1000009375.jpg, 2MiB, 3072x4080

Anonymous Tue 07 Jul 2026 13:49:58 No.11840377 Report

Quoted By:

My first ever model kit

Anonymous

View Same Google ImgOps iqdb SauceNAO Untitled.png, 498KiB, 596x782

Anonymous Thu 09 Jul 2026 04:51:14 No.11841859 Report

Quoted By:

Delpi is having their 30% off waterslides sale again, good for the whole week. As usual, if you buy $80 worth of stuff from them you get free shipping. Pretty sure this counts for the total before discounts, but I'm not 100% sure on that. And for anyone in the US who's worried about taxes or tariffs or de minimus, I've never been charged anything more than the listing prices.

(I shill for Delpi every time they have a sale, which only happens three or four times a year. I don't get paid for this, I just think it's a really good deal for anyone who's ever considered buying waterslides for their kits. Especially those who have a large backlog that would be a good excuse to buy $80 worth of waterslides in one purchase.)

Anonymous

View Same Google ImgOps iqdb SauceNAO P_20260708_141835~01.jpg, 1MiB, 1825x3676

Anonymous Thu 09 Jul 2026 05:12:21 No.11841867 Report

Quoted By:

>company trip

Well I happen to went to side f

What a fucking disappoinment
All the obscure kits and the cheaper kits are gone. You might as well go to the normal Gundam base at the near by canal mall if you are not interested in any of the Fuka special color kits.

You would think being a special front store they would try to make sure things are in stock.
You even have to scan your face when you make a purchase like a criminal or entering a nation.

Anonymous

View Same Google ImgOps iqdb SauceNAO benz_01.jpg, 510KiB, 1920x1400

Anonymous Thu 09 Jul 2026 06:22:34 No.11841903 Report

Quoted By: >>11841906

For my first 1/24 car I picked the world's first car.
But given the scarcity of reference pictures of the actual museum piece, I went with its modern replica (of which there are tons of pictures).

Anonymous

View Same Google ImgOps iqdb SauceNAO benz_02.jpg, 2MiB, 2805x3000

Anonymous Thu 09 Jul 2026 06:27:38 No.11841906 Report

Quoted By: >>11841907

>>11841903
I hear it can be had for around $70,000 these days and you can drive it all you want at blazing 10mph in your private park surrounding your mansion (since it's not legal on public roads).

Anonymous

View Same Google ImgOps iqdb SauceNAO benz_03.jpg, 2MiB, 2842x3000

Anonymous Thu 09 Jul 2026 06:28:41 No.11841907 Report

Quoted By: >>11841910

>>11841906

Anonymous

View Same Google ImgOps iqdb SauceNAO benz_wip01.jpg, 1MiB, 3000x2107

Anonymous Thu 09 Jul 2026 06:29:54 No.11841910 Report

Quoted By: >>11841913

>>11841907
Lots of tiny parts, not all of them a perfect fit.

Anonymous

View Same Google ImgOps iqdb SauceNAO benz_wip02.jpg, 2MiB, 3000x3000

Anonymous Thu 09 Jul 2026 06:33:04 No.11841913 Report

Quoted By:

>>11841910
The fuel tank was sadly lost half-painted, so I had to make a new one from scratch going by the reference pictures.

As usual also posted at https://www.tinami.com/creator/profile/65467

Anonymous

View Same Google ImgOps iqdb SauceNAO strelitzia.jpg, 617KiB, 1500x2000

Anonymous Thu 09 Jul 2026 15:03:06 No.11842103 Report

Quoted By: >>11842806 >>11843471

Moderoid Strelitzia.

pros:
>buildable Strelitzia
>end result looks alright
>good colour separation - no stickers used

cons:
>everything else

You're provided two faceplates in the kit- but the way she's been engineered, you'll only ever be able to use one. The engineering is downright crude, very fragile around the head and 'hair', and the thighs had massive seam gaps towards the knees because the involved pieces really weren't designed to sandwich together.

If there were some warnings about this kit beforehand, I missed them. Not a pleasant build.

Anonymous

Anonymous Fri 10 Jul 2026 08:17:30 No.11842806 Report

Quoted By: >>11842994

>>11842103
Yeah, moderoids can be a bit hit or miss. My mazinger needed some glue on parts that just wouldn't fucking hold.

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_20260427_231651947.jpg, 566KiB, 3072x4096

Anonymous Fri 10 Jul 2026 14:12:01 No.11842994 Report

Quoted By: >>11843471

>>11842806
NTA but they certainly are interesting. Nono was my first experience with one, and while she felt surprisingly well thought out in some ways, there were also just some bafflingly poor/weird choices that made it an odd sort of neutral experience overall.

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_20260710_152031.jpg, 3MiB, 4080x3072

Anonymous Fri 10 Jul 2026 21:32:49 No.11843428 Report

Quoted By: >>11843431 >>11843462

Time for war crimes

Anonymous

View Same Google ImgOps iqdb SauceNAO 1783718662190048.jpg, 3MiB, 4080x3072

Anonymous Fri 10 Jul 2026 21:33:52 No.11843431 Report

Quoted By: >>11843433 >>11843462

>>11843428

Anonymous

View Same Google ImgOps iqdb SauceNAO 1783718837539338.jpg, 3MiB, 4080x3072

Anonymous Fri 10 Jul 2026 21:34:56 No.11843433 Report

Quoted By: >>11843435 >>11843462

>>11843431
strangely, the stickers you get don't include a pair fo the twin sensors in the chest, weird

Anonymous

View Same Google ImgOps iqdb SauceNAO 1783719008497835.jpg, 3MiB, 4080x3072

Anonymous Fri 10 Jul 2026 21:36:49 No.11843435 Report

Quoted By: >>11843462

>>11843433
the inner frame is actually not tha tmuch bigger than themg F91, but the armor parts are so huge the size and mass once built dwarfs the Titans wannabe

Anonymous

Anonymous Fri 10 Jul 2026 22:09:02 No.11843462 Report

Quoted By: >>11843473 >>11843534

>>11843428
>>11843431
>>11843433
>>11843435
This looks great, I generally don't like/care about weathering (nor do I paint...) but this looks nice, realistic scuffs without looking like it was set on fire in-universe or irl, don't know how you did it.
>no sensor stickers for the MG
But even the HG came with stickers for those, the hell?

Anonymous

Anonymous Fri 10 Jul 2026 22:15:24 No.11843471 Report

Quoted By: >>11843685 >>11843773

>>11842103
>>11842994
It's a model. You're supposed to use tools, glue and paint.
If you want something that looks exactly like the promotional pics go build lego instead.

Anonymous

Anonymous Fri 10 Jul 2026 22:16:43 No.11843473 Report

Quoted By: >>11843521

>>11843462
thanks
it is just a combination of applying mr weathering black to all the kit and then use a sponge to drybrush wathever silver paint you have
the trick is to be subtle as possible with the latter and avoid going overboard

Anonymous

Anonymous Fri 10 Jul 2026 23:04:37 No.11843521 Report

Quoted By: >>11843530

>>11843473
That was just with a sponge? It looks like metal that got scratched off, those sharp lines, what the hell
Well, I'll try to keep that in mind, in the meantime your lovely photos are going in my gunpla subfolder. I warmed up to the AEUG version far more than the Titans version, but you made it look impressive in my eyes once again, thank you!
Wait did you build the fatass third-party full-armor Hyakushiki, think I talked to you last time about it, I enjoyed those photos as well

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_20250929_121304.jpg, 3MiB, 4080x3072

Anonymous Fri 10 Jul 2026 23:11:25 No.11843530 Report

Quoted By: >>11843874

>>11843521
I plan to take some more pics on the weapons are done but for that I need sunny days to topcoat
lately the weather has been rainy and humid as fuck so I can't do the final step under those conditions

>did you build the fatass third-party full-armor Hyakushiki
yeah I got this fatfuck last year I think, pretty good kit

Anonymous

Anonymous Fri 10 Jul 2026 23:15:57 No.11843534 Report

Quoted By: >>11843874

>>11843462
>But even the HG came with stickers for those, the hell?
the hg came much later than this kit but yeah, it is strange you don't get stickers for those rectangular cameras/senros in the chest
I ended up cutting my own from the green metallic sticker sheet for the sensors of the MG Narrative gundam, which is pretty thick and has a different green shade compared to my other leftover sheets

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_20260427_230907410.jpg, 2MiB, 3072x4096

Anonymous Sat 11 Jul 2026 02:36:24 No.11843685 Report

Quoted By:

>>11843471
Anon... I know it isn't the easiest to see but the hair's pretty obviously painted...

Anonymous

View Same Google ImgOps iqdb SauceNAO done done.jpg, 592KiB, 1500x2000

Anonymous Sat 11 Jul 2026 05:56:49 No.11843773 Report

Quoted By:

>>11843471
No, Moderoid Strelitzia is simply a low-quality product.

Anonymous

Anonymous Sat 11 Jul 2026 12:40:08 No.11843874 Report

Quoted By: >>11843881

>>11843530
The fatass Hyakushiki, my beloved...
>people highly recommend painting but either have to have a bunker or pray for better weather
>a lot of various cars go by, let alone the periodic construction, and so the air quality is probably going to be pretty shit
>hand-painting sounds comfy but most people discourage it, so just make some corrections with markers and call it a day
I'm fine with things so far, but I wish my kits would look nicer...
Also I don't know why we keep talking only on /toy/, I think I just see your posts sooner than I would going through dozens of posts on /m/
>>11843534
They're literally cameras! They're important cameras that it has two of instead of zero! And I'm pretty sure the front and back of the head have two, so you're already printing a non-zero amount of foil-green stickers, it's going to be the size of like, one extra head camera sticker, the fuck?
>the fascist (derogatory) regime committing war crimes on the reg were also committed to installing bodycams on their new murdermachine prototype
What did the Titans mean by this?

Anonymous

Anonymous Sat 11 Jul 2026 12:46:07 No.11843881 Report

Quoted By: >>11843886

>>11843874
>>the fascist (derogatory) regime committing war crimes on the reg were also committed to installing bodycams on their new murdermachine prototype
>What did the Titans mean by this?
It's good to have backup cameras because the head is such an obvious target for those filthy colonial terrorists and Zeek remnants.

Anonymous

View Same Google ImgOps iqdb SauceNAO Nu Cameras.png, 101KiB, 1367x1298

Anonymous Sat 11 Jul 2026 13:07:07 No.11843886 Report

Quoted By:

>>11843881
There was a big ol' chain of posts on /m/ about how Amuro learned from his last battle with Char and got really obsessed with adding cameras
Bodycams are definitely the right call (but the GMs both before and after are just given one...), but even the Nu only had one for some reason
>filthy colonial terrorists and Zeek remnants
Total spacenoid death
>one of the capcha icons looked like Axis
What did Hiroshimoot mean by this

Gelgoog Guy !!qznFQjkRiks

Gelgoog Guy !!qznFQjkRiks Sat 11 Jul 2026 15:15:13 No.11843949 Report

Quoted By:

New thread: >>11843947

Capcode	All Only User Posts Only Verified Posts Only Moderator Posts Only Manager Posts Only Admin Posts Only Developer Posts Only Founder Posts
Show Posts	All Only With Images Only Without Images Only Spoiler Images Only Non-Spoiler Images
Deleted Posts	All Only Deleted Posts Only Non-Deleted Posts
Ghost Posts	All Only Ghost Posts Only Non-Ghost Posts
Post Type	All Only Sticky Threads Only Opening Posts Only Reply Posts
Results	All Grouped By Threads
Order	Latest Posts First Oldest Posts First

On these archives

Your latest searches

Welcome to the Gunpla/Plamo General