/bant/ - International/Random » Thread #13854748

[96 / 30 / ?]

2MiB, 4160x3120, 1637181993600.jpg

Anonymous Fri 19 Nov 2021 01:04:10 No.13854748 View View Reply Original Report

Quoted By: >>13854751 >>13854757 >>13854760 >>13854761 >>13854781 >>13854784 >>13854787 >>13854789 >>13854799 >>13854826 >>13854832 >>13854839

bought welder but here is a problem

Anonymous

View Same Google ImgOps iqdb SauceNAO 1637182071023.jpg, 1MiB, 4160x3120

Anonymous Fri 19 Nov 2021 01:04:51 No.13854749 Report

Quoted By:

hmmmm

Anonymous

Anonymous Fri 19 Nov 2021 01:05:52 No.13854750 Report

Quoted By: >>13854753 >>13854754

please use an appropriate adapter

Anonymous

Anonymous Fri 19 Nov 2021 01:06:36 No.13854751 Report

Quoted By: >>13854756

>>13854748
off topic slide thread

Anonymous

Anonymous Fri 19 Nov 2021 01:06:58 No.13854752 Report

Quoted By:

#southamericanproblems

Anonymous

View Same Google ImgOps iqdb SauceNAO 1637182145271.jpg, 2MiB, 4160x3120

Anonymous Fri 19 Nov 2021 01:06:57 No.13854753 Report

Quoted By: >>13854755 >>13854805 >>13854822 >>13854832

>>13854750
appropriate enough

Anonymous

Anonymous Fri 19 Nov 2021 01:07:48 No.13854754 Report

Quoted By:

>>13854750
naw. let him fry his fucking brains out in Chile trying to mix and match voltage to his welder.

Anonymous

Anonymous Fri 19 Nov 2021 01:08:48 No.13854755 Report

Quoted By: >>13854758

>>13854753
yep, your doing great, fire that bitch up and start welding metal.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1637194350263.jpg, 3MiB, 4160x3120

Anonymous Fri 19 Nov 2021 01:08:49 No.13854756 Report

Quoted By:

>>13854751
welder is political since chinks BTFO jews by including schematics in manual.
Hope I will never need it.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1629412899148.jpg, 48KiB, 568x676

Anonymous Fri 19 Nov 2021 01:09:57 No.13854757 Report

Quoted By:

>>13854748
Been awhile since I've seen a village welder thread.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1637182209536.jpg, 2MiB, 2440x2924

Anonymous Fri 19 Nov 2021 01:10:30 No.13854758 Report

Quoted By: >>13854767 >>13854780 >>13854801

>>13854755
Sheeeeit

Anonymous

View Same Google ImgOps iqdb SauceNAO 1637182316147.jpg, 3MiB, 4160x3120

Anonymous Fri 19 Nov 2021 01:11:23 No.13854759 Report

Quoted By: >>13854762 >>13854764 >>13854766 >>13854778 >>13854832

High penetration welding rod.
Just as high penetration as I your mother last night

Anonymous

Anonymous Fri 19 Nov 2021 01:11:26 No.13854760 Report

Quoted By: >>13854765 >>13854772

>>13854748
Bro its not even going to penetrate if your power supply sucks. Even a 100 foot extension cord makes a good welder suck.

Anonymous

Anonymous Fri 19 Nov 2021 01:11:32 No.13854761 Report

Quoted By: >>13854763 >>13854768

>>13854748
This isn’t a how-to forum faggot. If you don’t know what you are doing then stop before you hurt yourself. Do you even know how many amps you need?
t. Professional combo welder

Anonymous

Anonymous Fri 19 Nov 2021 01:12:41 No.13854762 Report

Quoted By: >>13854768

>>13854759
>Welding in open-toed shoes
Godbless you crazy bastard

Anonymous

Anonymous Fri 19 Nov 2021 01:13:22 No.13854763 Report

Quoted By:

>>13854761
how new are you

Anonymous

View Same Google ImgOps iqdb SauceNAO 1604222245488.gif, 634KiB, 500x460

Anonymous Fri 19 Nov 2021 01:13:25 No.13854764 Report

Quoted By:

>>13854759
>flip flops
You got this anon. I'm proud of you. Post pics of hol(e)y toes later.

Anonymous

Anonymous Fri 19 Nov 2021 01:13:36 No.13854765 Report

Quoted By: >>13854768

>>13854760
Dude relax he's wearing his safety sandals, it's fine.

Anonymous

Anonymous Fri 19 Nov 2021 01:13:37 No.13854766 Report

Quoted By:

>>13854759
Anon wear fucking shoes.

Anonymous

View Same Google ImgOps iqdb SauceNAO FB_IMG_1578017711967.jpg, 137KiB, 720x960

Anonymous Fri 19 Nov 2021 01:15:08 No.13854767 Report

Quoted By: >>13854817

>>13854758
Remember lads, a grinder and paint makes you the welder you ain't.

Anonymous

View Same Google ImgOps iqdb SauceNAO 222.jpg, 2MiB, 4160x3120

Anonymous Fri 19 Nov 2021 01:16:25 No.13854768 Report

Quoted By: >>13854771 >>13854776

>>13854761
>Do you even know how many amps you need?
Welder itself claims to output 200A (which I doubt), but according to shield it wants 21A from socket. Which is perfecly fine as it is short bursts, not gonna melt 10A socket.
>>13854762
I nearly got that hot things that fly on my balls when i tried to weld on table
Need apron.
>>13854765
This.

Anonymous

View Same Google ImgOps iqdb SauceNAO 333.jpg, 3MiB, 4160x3120

Anonymous Fri 19 Nov 2021 01:17:51 No.13854769 Report

Quoted By: >>13854774 >>13854783 >>13854785 >>13854793 >>13854811

Fucking internet lied to me. They said 6011 will weld rusty crap. But it doesn't.
Had to grind that shit before trying to weld

Anonymous

Anonymous Fri 19 Nov 2021 01:20:09 No.13854770 Report

Quoted By: >>13854773

the fact that this is the most interesting thread on /pol/ right now just shows how low this place as sunk

Anonymous

Anonymous Fri 19 Nov 2021 01:21:22 No.13854771 Report

Quoted By:

>>13854768
>shield
label*

Anonymous

Anonymous Fri 19 Nov 2021 01:24:06 No.13854772 Report

Quoted By:

>>13854760
not if its a 10 gauge extension cord on AC power. you can get 100ft before any serious current drop. if you have a big welding machine you just run your dc leads and add up to like 250ft of cord.

Anonymous

Anonymous Fri 19 Nov 2021 01:24:58 No.13854773 Report

Quoted By:

>>13854770
yea

Anonymous

Anonymous Fri 19 Nov 2021 01:27:17 No.13854774 Report

Quoted By: >>13854775 >>13854795

>>13854769
What are you trying to build a school?

Anonymous

Anonymous Fri 19 Nov 2021 01:29:40 No.13854775 Report

Quoted By: >>13854795 >>13854830

>>13854774
Idk what I want to build, I just want to join two fucking pieces of 2-3 mm steel tubes somewhat reliably, so later I can do prison-tier furniture and idk, stuff. Workbench, fence, bars for windows, bars for linux...

Anonymous

Anonymous Fri 19 Nov 2021 01:30:25 No.13854776 Report

Quoted By: >>13854777

>>13854768
You are holding the rod wrong it looks like, my first welds looked like that too. Stick welds need a certain angle for the right penetration and pool size.

Anonymous

Anonymous Fri 19 Nov 2021 01:31:11 No.13854777 Report

Quoted By: >>13854779 >>13854786 >>13854797 >>13854800 >>13854806

>>13854776
>You are holding the rod wrong it looks like,
Yes, because im trying to keep arc going, and shit always wants to stick.

Anonymous

Anonymous Fri 19 Nov 2021 01:32:04 No.13854778 Report

Quoted By:

>>13854759
Negro wear some shoes jesus christ

Anonymous

Anonymous Fri 19 Nov 2021 01:32:16 No.13854779 Report

Quoted By: >>13854782

>>13854777
Yea the sticking on rusty shit is annoying as fuck, I never found a good answer other than doing some prep on the surface. If you try to up the power it will usually vaporize the filler a bit

Anonymous

Anonymous Fri 19 Nov 2021 01:32:46 No.13854780 Report

Quoted By:

>>13854758
myy nigger, looks great, youre doin it man

Anonymous

Anonymous Fri 19 Nov 2021 01:33:51 No.13854781 Report

Quoted By: >>13854807

>>13854748
you need bigger electricity not smaller.

Anonymous

Anonymous Fri 19 Nov 2021 01:34:54 No.13854782 Report

Quoted By: >>13854790

>>13854779
idk tomorrow i will get another electrode (6013 if i will find it, but if no 7018) and flap discs, because trying to remove rust with cut off wheel is sketchy as fuck.
Or do i get abrasive?
Don't want wirewheel, as wires will fly everywhere.

Anonymous

View Same Google ImgOps iqdb SauceNAO 0AC1DFF0-3CBF-4EF3-B713-4C8C8037 (...).jpg, 26KiB, 608x540

Anonymous Fri 19 Nov 2021 01:35:12 No.13854783 Report

Quoted By: >>13854788 >>13854804

>>13854769
Rust doesn’t weld. If it has a thin surface layer but plenty of good steel underneath then 6011 works fine. Also make sure you’re welding with correct polarity for the electrode

Anonymous

View Same Google ImgOps iqdb SauceNAO 1636783393737.jpg, 38KiB, 600x423

Anonymous Fri 19 Nov 2021 01:35:42 No.13854784 Report

Quoted By:

>>13854748
Break the tines off a fork and tape them to the pins with electrical tape, you b i t c h f a g g o t.

Anonymous

Anonymous Fri 19 Nov 2021 01:36:38 No.13854785 Report

Quoted By: >>13854791

>>13854769
you have the electricity on backwards, its sucking the rust in instead of pushing it out

Anonymous

Anonymous Fri 19 Nov 2021 01:37:11 No.13854786 Report

Quoted By:

>>13854777
“If there’s slag you drag”
rod quality affects performance and so does your polarity

Anonymous

View Same Google ImgOps iqdb SauceNAO burger tow bar.png, 414KiB, 432x572

Anonymous Fri 19 Nov 2021 01:38:27 No.13854787 Report

Quoted By: >>13854792 >>13854794

>>13854748
>welder
>be burger

Anonymous

Anonymous Fri 19 Nov 2021 01:39:11 No.13854788 Report

Quoted By: >>13854824

>>13854783
I tried 4 polarities.
DCEP, DCEN and "wtf where is arc, oh fuck i forgot to connect stinger lead" and "wtf where is arc, oh fuck i forgot to connect ground lead"
All work the same.
Best result was from grinding until shiny metal.

Btw, thoughts on vid? https://www.youtube.com/watch?v=4cay4l5ruc4
Is shit legit? I saw in welding supply stores such electrodes.
Can I nigger-tig with it by starting arc with carbon, and then feeding normal electrode in arc.

Anonymous

View Same Google ImgOps iqdb SauceNAO 64072f8ff00db9469bf38d34ec08c9e8.jpg, 177KiB, 612x612

Anonymous Fri 19 Nov 2021 01:39:18 No.13854789 Report

Quoted By:

>>13854748
What the fuck is happening.

Anonymous

Anonymous Fri 19 Nov 2021 01:39:20 No.13854790 Report

Quoted By: >>13854796

>>13854782
Flap discs are best for surface removal
6013 is an easy-flow shallow penetration rod. Would work well for your intentions but you should definitely prep the surface and get some shiny metal to weld to

Anonymous

View Same Google ImgOps iqdb SauceNAO 1636478991183.png, 234KiB, 381x422

Anonymous Fri 19 Nov 2021 01:40:28 No.13854791 Report

Quoted By:

>>13854785

Anonymous

Anonymous Fri 19 Nov 2021 01:40:34 No.13854792 Report

Quoted By:

>>13854787
That tow rig and that bumper sticker and that license plate... MAKE SO MUCH SENSE TOGETHER.

Anonymous

Anonymous Fri 19 Nov 2021 01:40:49 No.13854793 Report

Quoted By: >>13854796

>>13854769
You either have the wrong polarity settings or you're settings are too cold if it's sticking to the metal. I havent stick welded in awhile but it should be DCEP I believe and I would pipe weld around 120 amps for a root and shit would just glide like butter on a schd 40 6"

Anonymous

Anonymous Fri 19 Nov 2021 01:41:18 No.13854794 Report

Quoted By: >>13854798 >>13854835

>>13854787
> weight rating = 300 pounds

Anonymous

Anonymous Fri 19 Nov 2021 01:42:25 No.13854795 Report

Quoted By:

>>13854774
>>13854775
This thread is an abomination.

Anonymous

Anonymous Fri 19 Nov 2021 01:42:42 No.13854796 Report

Quoted By: >>13854810 >>13854811

>>13854790
What about 7018, because it seems 6013 is just out of stock everywhere (not sure though).
It should be mid-penetrating right?
Idk, to me it seems idk wtf im doing... But probably rod matters more when you don't know the fuck you do.
>>13854793
77 amps, and I was still fighting between burning a hole and extinguishing arc. Higher amps burn hole instantly, as shit is rather thin.

Anonymous

Anonymous Fri 19 Nov 2021 01:43:34 No.13854797 Report

Quoted By: >>13854806

>>13854777
Looks like high arcing more than anything. Distance between workpiece and rod should be as tight as possible without actually driving the rod into the workpiece.

It's more muscle memory than anything. The only way to improve is to practice.

Anonymous

Anonymous Fri 19 Nov 2021 01:43:46 No.13854798 Report

Quoted By:

>>13854794
It's just some gay Bostonian city fat with a gay 100lb suitcase-sized trailer. Some gay Thule luggage thinger.

Anonymous

View Same Google ImgOps iqdb SauceNAO Enoc Powell.png, 281KiB, 727x627

Anonymous Fri 19 Nov 2021 01:44:09 No.13854799 Report

Quoted By: >>13854814

>>13854748
AAAAAAAAHHHHHHHHH don wea, idk what the hell are you trying to do, explain.

Anonymous

Anonymous Fri 19 Nov 2021 01:44:48 No.13854800 Report

Quoted By: >>13854814

>>13854777
sounds like a bad earth. clean the rust of first my nigga

Anonymous

Anonymous Fri 19 Nov 2021 01:44:55 No.13854801 Report

Quoted By:

>>13854758
I was worried then I saw your flag.

Anonymous

Anonymous Fri 19 Nov 2021 01:45:30 No.13854802 Report

Quoted By:

Unzip your pants.
Stand in front of toilet.
Pull out your dick
EUROPEAN!

Anonymous

View Same Google ImgOps iqdb SauceNAO 5D7F904C-2D9D-4CF1-A6FF-7B57995F (...).jpg, 4MiB, 4032x3024

Anonymous Fri 19 Nov 2021 01:46:11 No.13854803 Report

Quoted By: >>13854808 >>13854809 >>13854814 >>13854816 >>13854819

Meh

Anonymous

View Same Google ImgOps iqdb SauceNAO 20211014_154915.jpg, 3MiB, 4032x2268

Anonymous Fri 19 Nov 2021 01:46:15 No.13854804 Report

Quoted By:

>>13854783
Nigger what?

Anonymous

Anonymous Fri 19 Nov 2021 01:46:31 No.13854805 Report

Quoted By: >>13854814

>>13854753
The wires going into the power strip are twice as thick as the power strip's wires

Anonymous

Anonymous Fri 19 Nov 2021 01:46:51 No.13854806 Report

Quoted By: >>13854814

>>13854777
>>13854797
Looks like you also need to slow down. For stick you really want the rod to almost travel down the joint by itself. All you really need to do is adjust it's angle as it burns.

Anonymous

Anonymous Fri 19 Nov 2021 01:46:59 No.13854807 Report

Quoted By:

>>13854781
long texas has thin electricity only

Anonymous

Anonymous Fri 19 Nov 2021 01:48:59 No.13854808 Report

Quoted By:

>>13854803
Okay that's funny.

Anonymous

Anonymous Fri 19 Nov 2021 01:49:19 No.13854809 Report

Quoted By:

>>13854803
Nigger you have undercut out the ass. Slow the fuck down.

Anonymous

Anonymous Fri 19 Nov 2021 01:49:32 No.13854810 Report

Quoted By: >>13854814

>>13854796
That graphite shit is a waste of time if you’re trying to get good structural welds, even for the thinner stuff. 7018 is a nice all purpose rod and very low volatility unlike 6000 series rods. Look for 3/32” rods for your stuff. Run at 90-100 amps and you’re good to go. 7018 is dcep

Anonymous

Anonymous Fri 19 Nov 2021 01:49:39 No.13854811 Report

Quoted By: >>13854814

>>13854796
From the pic >>13854769 it looks like it could be 1/4" thick but obviously I cant tell
If you're just trying to fill the fucker up with weld I would just stick with a 7018 rod, let the puddle build up before you move and pull it slowly along. 6010 is used for root passes mostly as its a penetrating rod
I mostly Tig/Mig and even with tig I run about 160Amps with a foot peddle and most of my welds even on 18 gauge+ are rainbow / Silver / Gold so heat can be your friend if you know how to work it

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_0689.jpg, 3MiB, 3648x2736

Anonymous Fri 19 Nov 2021 01:50:50 No.13854812 Report

Quoted By: >>13854815 >>13854818 >>13854821 >>13854835

rate my diy project

Anonymous

Anonymous Fri 19 Nov 2021 01:51:18 No.13854813 Report

Quoted By:

Best thread on this asian transvestite shit eating enthusiast forum ive seen in weeks

Anonymous

View Same Google ImgOps iqdb SauceNAO ApkLia2CQAAJQHy.jpg, 64KiB, 484x648

Anonymous Fri 19 Nov 2021 01:51:39 No.13854814 Report

Quoted By: >>13854825 >>13854828 >>13854829 >>13854834

>>13854800
I guess.
>>13854799
Trying to weld wn
>>13854803
Kek I have better.
>>13854805
Shit would be fine, if it is not glowing it is not overloaded.
>>13854806
If I slow down i burn hole.
I guess I should steal a thicker metal to practice on.
>>13854810
But let's say for fixing galvanized sheet to structure? Especially that aluminium-zinc shit that is impossible to solder.
>>13854811
3/32 rod, and 2-3 mm thick steel box section.

Anonymous

Anonymous Fri 19 Nov 2021 01:52:02 No.13854815 Report

Quoted By:

>>13854812
cursed images/10

Anonymous

View Same Google ImgOps iqdb SauceNAO 20200104_110208.jpg, 161KiB, 555x566

Anonymous Fri 19 Nov 2021 01:52:11 No.13854816 Report

Quoted By:

>>13854803
You're not supposed to apply filler with a spatula you fucking dogfucker. Id say get back to work but I'm calling cwb right now to have your tickets revoked so don't bother.

Anonymous

Anonymous Fri 19 Nov 2021 01:52:16 No.13854817 Report

Quoted By:

>>13854767
That's a cutting disc tho

Anonymous

Anonymous Fri 19 Nov 2021 01:52:35 No.13854818 Report

Quoted By: >>13854827

>>13854812
What bike?

Anonymous

View Same Google ImgOps iqdb SauceNAO 4F09FDAE-70C3-491E-8A9D-1667346D (...).jpg, 922KiB, 1536x2048

Anonymous Fri 19 Nov 2021 01:52:43 No.13854819 Report

Quoted By: >>13854823 >>13854837

>>13854803
Nigger, that weld is awful.

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_0692.jpg, 4MiB, 3648x2736

Anonymous Fri 19 Nov 2021 01:53:06 No.13854820 Report

Quoted By:

Anonymous

Anonymous Fri 19 Nov 2021 01:53:14 No.13854821 Report

Quoted By:

>>13854812
Whats stopping you from buying a Yoot like every other one of you criminals on the wrong side of the world?
>Nice fence tho, u should stain that bad boy

Anonymous

Anonymous Fri 19 Nov 2021 01:53:44 No.13854822 Report

Quoted By:

>>13854753
Oh shit Nigger what are you doing

Anonymous

Anonymous Fri 19 Nov 2021 01:53:45 No.13854823 Report

Quoted By: >>13854831 >>13854850

>>13854819
>literal globules and extra metal everywhere
you dont know dick about welding

Anonymous

Anonymous Fri 19 Nov 2021 01:53:56 No.13854824 Report

Quoted By:

>>13854788
Lots of JewTube welding vids are all 'asthetic' and are 100% uncertified.
All the welders I know have to have their welds either X-Ray'd or Pressure Tested.
The video does not work well other than the smallest weakest shit, as it does not add metal, it will not fill gaps and will be the weakest part of the metal, whereas a normal proper weld will be some of the strongest parts of a metal.

Anonymous

Anonymous Fri 19 Nov 2021 01:54:00 No.13854825 Report

Quoted By:

>>13854814
I can confidently say that you are most proficient welder with a Chilean flag I have seen.

Anonymous

Anonymous Fri 19 Nov 2021 01:54:05 No.13854826 Report

Quoted By:

>>13854748
Its still just hot neutral and ground, cut the tip off and splice to a extension chord plug

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_0728.jpg, 2MiB, 3648x2736

Anonymous Fri 19 Nov 2021 01:54:24 No.13854827 Report

Quoted By: >>13854833

>>13854818
VT750

Anonymous

Anonymous Fri 19 Nov 2021 01:55:17 No.13854828 Report

Quoted By:

>>13854814
>galvanized to structure
You should not weld galvanized metal, but if you HAVE to, use 3/32” 6013 and and move quickly to not burn away too much sheet.txkjt

Anonymous

View Same Google ImgOps iqdb SauceNAO tipico chileno.gif, 969KiB, 500x281

Anonymous Fri 19 Nov 2021 01:55:18 No.13854829 Report

Quoted By:

>>13854814
>a benis like weld

Anonymous

View Same Google ImgOps iqdb SauceNAO FGC-9_Photo_Components-scaled.jpg, 399KiB, 1440x2560

Anonymous Fri 19 Nov 2021 01:55:33 No.13854830 Report

Quoted By:

>>13854775
Anon, you want to build this.

>https://ctrlpew.com/the-complete-getting-started-guide/
>https://thegatalog.com/

Anonymous

View Same Google ImgOps iqdb SauceNAO E14A562A-7CD8-436A-A597-5A26DBF2 (...).jpg, 1MiB, 1574x2100

Anonymous Fri 19 Nov 2021 01:55:33 No.13854831 Report

Quoted By:

>>13854823
That was a 4g 3/8 full pen that got bend tested and passed. Apparently you dont know shit about fuck.

Anonymous

Anonymous Fri 19 Nov 2021 01:55:43 No.13854832 Report

Quoted By:

>>13854748
>>13854753
>>13854759
Based welder is based.

Anonymous

Anonymous Fri 19 Nov 2021 01:55:48 No.13854833 Report

Quoted By:

>>13854827
>VT750
Nice

Anonymous

Anonymous Fri 19 Nov 2021 01:55:49 No.13854834 Report

Quoted By:

>>13854814
>If I slow down i burn hole.
Then you either need to reduce your amperage or use a thinner rod. What rods are you running anyway? It's been awhile since I've gone over my old trade book, but irc 7018 is a fast freeze rod and is generally a good all purpose rod anyway. Just grind your shit down to bare steel. Majority of a good weld is the prep work that went in beforehand.

Anonymous

Anonymous Fri 19 Nov 2021 01:56:43 No.13854835 Report

Quoted By: >>13854847 >>13855309

>>13854794
>> weight rating = 300 pounds
That's almost exactly the average weight of an American, who knows maybe this Bernie fanboy faggot makes his buttbuddies sit on that trailer hitch, so when they arrive home they are ready for homosexual love making.

>>13854812
>rate my diy project
Do you take your kangaroo wife on that mini-trailer?

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_0713.jpg, 2MiB, 3648x2736

Anonymous Fri 19 Nov 2021 01:57:39 No.13854836 Report

Quoted By:

Anonymous

Anonymous Fri 19 Nov 2021 01:57:55 No.13854837 Report

Quoted By: >>13854852

>>13854819
>cutting the coupon before you remove the backing plate
You're just making more work for yourself ya nigger. Torch most of it off beforehand and make sure you put a radius on all of your edges before it gets bent.

Anonymous

Anonymous ID:3uahidm7 Fri 19 Nov 2021 01:59:31 No.13854839 Report

Quoted By:

>>13854748
FUCKING TRANNY JANNIES

Anonymous

Anonymous ID:qpRdp0Ts Fri 19 Nov 2021 01:59:44 No.13854841 Report

Quoted By:

>>348298120
>What rods are you running anyway?
6011 3/32
metal is 2-3 mm
77 chinese amps.
> Just grind your shit down to bare steel
This helped btw, but I can't clean steel well enough since i don't have disc.
Now, question is, do you clean fresh steels from the steel place or black-grey coating is not as bad as 0.25mm of rust

Another fucking thread died, thansk janny

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_0714.jpg, 2MiB, 3648x2736

Anonymous ID:X4TqlJ+C Fri 19 Nov 2021 02:01:16 No.13854847 Report

Quoted By: >>13855309

>>13854835
>Do you take your kangaroo wife on that mini-trailer?
indeed

Anonymous

Anonymous ID:CZk3bxeg Fri 19 Nov 2021 02:01:31 No.13854850 Report

Quoted By:

>>13854823
U fucking dumb or what?

Anonymous

Anonymous ID:BGoc5gpO Fri 19 Nov 2021 02:02:16 No.13854852 Report

Quoted By:

>>13854837
>implying i did the cutting
The test administers did all that shit. Fuck if i care, i got paid to test out and watch them do it.

Anonymous

Anonymous ID:uE2PMHnk Fri 19 Nov 2021 02:19:54 No.13855309 Report

Quoted By:

>>13854847
>>>13854835
>>Do you take your kangaroo wife on that mini-trailer?
>indeed
Honest question: people have been caught fucking dogs, cows, chickens and even lamas... but I have never heard of somebody fucking a kangaroo, not even Abos, are they unfuckable because of their marsupial cunt or because of their powerful legs?

Capcode	All Only User Posts Only Verified Posts Only Moderator Posts Only Manager Posts Only Admin Posts Only Developer Posts Only Founder Posts
Show Posts	All Only With Images Only Without Images Only Spoiler Images Only Non-Spoiler Images
Deleted Posts	All Only Deleted Posts Only Non-Deleted Posts
Ghost Posts	All Only Ghost Posts Only Non-Ghost Posts
Post Type	All Only Sticky Threads Only Opening Posts Only Reply Posts
Results	All Grouped By Threads
Order	Latest Posts First Oldest Posts First

On these archives

Your latest searches