I bought a 2016 rockshox pike RC from ebay. The fork was unused, no star nut installed or even marks of installation & removal of the star nut, uncut steerer too. The serial number wasn't touched (
https://www.sram.com/rockshox/authentication-notice) so I got it.
Anyway I got it for a good price so I bought it even though it had to much travel for my needs, but I figured that even if I bought an aftermarket air shaft to reduce travel, the total price of the fork would be pretty cheap.
Now I have reduced the travel and the fork is good to go. But there's a confusing part; I found two service manuals for pike. One of them suggest that the volume of suspension fluid in both lowers are 10ml
(
https://sram-cdn-pull-zone-gsdesign.netdna-ssl.com/cdn/farfuture/hZYzdZ9U2Df4S43hqyfPt1mx-UoDJ28-MrHuZTbnEl8/mtime:1471624854/sites/default/files/techdocs/gen_0000000004461_rev_e_2014-2017_pike_service_manual_english.pdf page 8)
And then there is this other manual that tells me to put 5ml to the drive side and 15ml to the other side.
(
https://www.sram.com/sites/default/files/techdocs/gen_0000000004461_rev_b_2014_-_present_pike.pdf page 40)
When I changed the air shaft, I used the manual in the second link because that was the first one I found. I happened to come by the other manual later and now I'm not sure how much oil there should be in the lowers. The both manuals are told to be for the 2014 and later pike forks.
Is there something I'm missing?
