/n/ - Transportation » Thread #1577618

[53 / 9 / ?]

2MiB, 1171x864, Capture.png

Anonymous Tue 24 Nov 2020 06:02:49 No.1577618 View View Reply Original Report

OH NONONONONO HAMBROS NOT LIKE THIS, HE MUST BE STOPPED WHILE THERE'S STILL TIME

https://www.youtube.com/watch?v=Yrr9qKwWtho

Anonymous

Anonymous Tue 24 Nov 2020 09:04:45 No.1577650 Report

Quoted By:

>inb4 drama

Anonymous

View Same Google ImgOps iqdb SauceNAO vlcsnap-2020-11-24-10h48m04s196.png, 1MiB, 1920x1080

Anonymous Tue 24 Nov 2020 16:49:31 No.1577775 Report

Quoted By: >>1577781

OH NONONONONONO, HE WAS SUPPOSED TO EXPOSE SHAMBINI, WHAT HAPPENED??

Anonymous

Anonymous Tue 24 Nov 2020 17:01:09 No.1577776 Report

Quoted By: >>1577780 >>1577781 >>1577817

Peak Torque presented a concise and unbiased review with actual measurements, whereas Hambini likes to use MS Paint to produce aerodynamics data from YouTube clips. I would have been surprised if those BB shells weren't machined incredibly well, I'm sure as a bearing man Hambini has lots of industry contacts who have the capability to machine parts with such precision.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1601855598637.png, 426KiB, 499x500

Anonymous Tue 24 Nov 2020 17:03:05 No.1577778 Report

Quoted By:

He really liked it :)

Anonymous

View Same Google ImgOps iqdb SauceNAO 1602730284635.png, 229KiB, 458x490

Anonymous Tue 24 Nov 2020 17:08:58 No.1577780 Report

Quoted By: >>1577801 >>1578116

>>1577776
>yes the product is basically perfect but the guy who made it says naughty words
seeeeeeeething

Anonymous

Anonymous Tue 24 Nov 2020 17:09:18 No.1577781 Report

Quoted By: >>1577790 >>1577801 >>1577817 >>1578090

>>1577775
>>1577776
>design thing in solidworks
>tell machinist to machine to +/- 0.001 tolerance
>machinist machines to +/- 0.001 tolerance
Hambini stop shitposting here. You always accuse other people of bringing up Hambini, but you're always the one posting this shit here. No one else but you would even keep track of this review by a literal who ahead of time except you. It's really pathetic.

Anonymous

Anonymous Tue 24 Nov 2020 17:45:42 No.1577790 Report

Quoted By: >>1577796

>>1577781
Whew, someone's not fucking their hairdresser...

Anonymous

Anonymous Tue 24 Nov 2020 17:56:03 No.1577793 Report

Quoted By:

t least I'm not fucking a toilet instead using it to shit in.

Anonymous

View Same Google ImgOps iqdb SauceNAO hamboni.png, 294KiB, 448x481

Anonymous Tue 24 Nov 2020 18:03:33 No.1577796 Report

Quoted By:

>>1577790

Anonymous

Anonymous Tue 24 Nov 2020 18:12:16 No.1577801 Report

Quoted By: >>1577817

>>1577780
>>1577781
Ok am I hambini or am I seething about Hambini make up your low IQ brains

Anonymous

Anonymous Tue 24 Nov 2020 19:06:00 No.1577817 Report

Quoted By:

>>1577801
If you're >>1577776 only the greentext of >>1577781 was meant for you.

Anonymous

Anonymous Tue 24 Nov 2020 20:46:14 No.1577832 Report

Quoted By: >>1577845 >>1577924

NO, I AM HAMBINI

Anonymous

View Same Google ImgOps iqdb SauceNAO DexBoy.jpg, 29KiB, 728x654

Anonymous Tue 24 Nov 2020 21:26:15 No.1577845 Report

Quoted By: >>1577924

>>1577832
NO, I AM

Anonymous

Anonymous Wed 25 Nov 2020 01:40:02 No.1577917 Report

Quoted By:

It would be sadder if you weren’t hambini and just simping for him

Anonymous

Anonymous Wed 25 Nov 2020 02:11:01 No.1577924 Report

Quoted By: >>1578087

>>1577832
>>1577845
time stamp plz
pics or it no happen

Anonymous

Anonymous Wed 25 Nov 2020 04:31:39 No.1577961 Report

Quoted By: >>1578065

>>1577618
How's that supposed to stay in? Glue? Just interference fit and you're supposed to believe vibration and heating/cooling cycles isn't going to make it come loose?
I'm using a Wheels Manufacturing machined BB for BBRight and it's two pieces that thread together and that's how it stays in. How is this supposed to be better?

Anonymous

Anonymous Wed 25 Nov 2020 07:39:18 No.1578065 Report

Quoted By: >>1578290

>>1577961
How do you think threads stay locked together?

Anonymous

Anonymous Wed 25 Nov 2020 10:05:20 No.1578087 Report

Quoted By:

>>1577924
They're both lying, I AM the real Hambini

Anonymous

Anonymous Wed 25 Nov 2020 10:30:02 No.1578090 Report

Quoted By: >>1578092

>>1577781
Peak Torque has collaborated with Hambindian before, they aren’t strangers

Anonymous

Anonymous Wed 25 Nov 2020 10:40:41 No.1578092 Report

Quoted By: >>1578108

>>1578090
Yes, and? Obviously that's how hambone knows this guy is going to do a review ahead of time so he can shill it on the only cycling forum he isn't banned on. Peak Torque and hambini would both be literally whos if not for the constant shilling.

Anonymous

Anonymous Wed 25 Nov 2020 11:23:00 No.1578108 Report

Quoted By: >>1578112

>>1578092
Do you know how a youtube subscriber feed works?

Anonymous

Anonymous Wed 25 Nov 2020 11:26:38 No.1578112 Report

Quoted By: >>1578114

>>1578108
It means you're subscribed to this literal who with 13k subs and rushed to /n/ to shill it.

Anonymous

Anonymous Wed 25 Nov 2020 11:29:21 No.1578114 Report

Quoted By: >>1578120

>>1578112
*rushed to /n/ to troll you specifically because I knew you'd lose your shit exactly like you are right now

Anonymous

Anonymous Wed 25 Nov 2020 11:33:32 No.1578116 Report

Quoted By: >>1578120

>>1577780
We get it, you’re a Rick and Morty fan and love Hambini

Anonymous

Anonymous Wed 25 Nov 2020 11:44:16 No.1578120 Report

Quoted By: >>1578122

>>1578114
Ok hambini or hambini simp. No one on /n/ would even care about hambini if you weren't constantly shitposting about him/you. You're like a monkey flinging shit around and saying you only fling shit around because you know it annoys people. It wouldn't annoy them if you didn't fling shit around in the first place.

>>1578116
I'm pretty sure it's hambini himself because hambini has a persecution complex at this point and thinks people don't like him because he says bad words on other forums like some sort of edgelord tween. He comes to the only place mods won't ban him for language and thinks 4channers are shocked by his language like everywhere else. This seriously is not an argument a native 4channer would make, only someone who only came here from reddit or something. He doesn't seem to get that he's not being criticized for using bad words, he's being criticized for hiding behind them.

Anonymous

Anonymous Wed 25 Nov 2020 11:53:59 No.1578122 Report

Quoted By: >>1578124 >>1578132

>>1578120
>No one on /n/ would even care about hambini if you weren't constantly shitposting about him/you.
11 ips ITT and all of them except you like are here either because they like him and/or to make fun of you.

>I'm pretty sure it's hambini himself
It's genuinely hilarious to me that you think he or anyone else important has ever heard of this shithole, let alone would give a fuck

Anonymous

Anonymous Wed 25 Nov 2020 11:58:24 No.1578124 Report

Quoted By: >>1578127

>>1578122
>hambone is important
Does anyone besides hambone believe this? Dumb phoneposting hambone. You are a literally who and no one would know who you were if you didn't go on every cycling forums you could find and throw autistic shitfits.

Anonymous

Anonymous Wed 25 Nov 2020 12:01:25 No.1578127 Report

Quoted By: >>1578128

>>1578124
anti-hambini posts on /n/ are raising his profile and are much of the hambini-related discussion

methinks the lady doth protest too much

Anonymous

Anonymous Wed 25 Nov 2020 12:03:47 No.1578128 Report

Quoted By:

>>1578127
that post was painfully reddit

Anonymous

Anonymous Wed 25 Nov 2020 12:21:09 No.1578132 Report

Quoted By: >>1578145

>>1578122
>he or anyone else important
firstly
>implying
secondly he literally posts here all the time

Anonymous

Anonymous Wed 25 Nov 2020 13:31:06 No.1578145 Report

Quoted By: >>1578153

>>1578132
>he literally posts here all the time
Link one post in the history of this board with any evidence of being from Hambini other than the delusions in your head.

Here's the archive to help you out, it seems to go back about 4 years: https://archive.nyafuu.org/n/

Anonymous

Anonymous Wed 25 Nov 2020 14:20:22 No.1578153 Report

Quoted By: >>1578155

>>1578145
Exhibit A:

https://archive.nyafuu.org/n/thread/1471115/#q1481005

some anon posted up his real life Sanjeev Varah Instagram account that then got deleted, of course he reads and posts here and shills for himself like an edgelord narcissist

Anonymous

Anonymous Wed 25 Nov 2020 14:31:22 No.1578155 Report

Quoted By: >>1578160 >>1578187

>>1578153
Your evidence is he deleted an instagram account he wasn't using because stalkers found it? IIRC the account had one picture of him and his legal name, which for some retarded reason you seem to think is a secret despite it being publicly listed on his own website. Why do you think that thread was the first time it was exposed? He clearly has many nutjob stalkers across various websites.

And when did he delete the account, 30 seconds after that post was made or months later? He deleted his twitter too, was that also because you were getting too close to the truth?

https://en.wikipedia.org/wiki/Ideas_and_delusions_of_reference

Anonymous

Anonymous Wed 25 Nov 2020 14:51:54 No.1578160 Report

Quoted By:

>>1578155
Hi Hambone

Anonymous

Anonymous Wed 25 Nov 2020 15:13:01 No.1578165 Report

Quoted By: >>1578167 >>1578169 >>1578205

>>1577618
Engineers are fucking insufferable, every last one of them they are god's gift to engineering.

Anonymous

Anonymous Wed 25 Nov 2020 15:39:05 No.1578167 Report

Quoted By:

>>1578165
Not true. I'm an engineer. I'm Engineering's gift to god.

Anonymous

Anonymous Wed 25 Nov 2020 15:49:43 No.1578169 Report

Quoted By:

>>1578165
*think

Anonymous

View Same Google ImgOps iqdb SauceNAO NNZ.png, 152KiB, 999x695

Anonymous Wed 25 Nov 2020 16:54:55 No.1578187 Report

Quoted By: >>1578287

>>1578155
DESIGNATED
SHITTING
STREET

Use the loo, you filthy poo.

Engineer

Engineer Wed 25 Nov 2020 18:22:43 No.1578205 Report

Quoted By:

>>1578165
As an engineer, I concur.
t. engineer

Anonymous

Anonymous Wed 25 Nov 2020 18:50:21 No.1578211 Report

Quoted By:

hambini is based
look at all this seething!

Anonymous

Anonymous Thu 26 Nov 2020 00:06:16 No.1578287 Report

Quoted By:

>>1578187
BASED?????

Anonymous

Anonymous Thu 26 Nov 2020 00:09:42 No.1578290 Report

Quoted By: >>1578351

>>1578065
By being torqued.
Mine's been installed for almost a year and isn't loose nor will it become so.

Anonymous

Anonymous Thu 26 Nov 2020 00:34:18 No.1578299 Report

Quoted By: >>1578303 >>1578317

> muh bearings
> muh watts
how about you train for one extra hour a year to make up the difference ? lazy ass dentists. I smoke your ass on a plastic cup square taper

Anonymous

Anonymous Thu 26 Nov 2020 00:48:26 No.1578303 Report

Quoted By: >>1578313 >>1578322

>>1578299
*creaks*

Anonymous

Anonymous Thu 26 Nov 2020 01:21:55 No.1578313 Report

Quoted By: >>1578321 >>1578336 >>1578351 >>1578438

>>1578303
square taper doesn't creak. pressfit creaks.

Anonymous

Anonymous Thu 26 Nov 2020 01:28:31 No.1578317 Report

Quoted By: >>1578319

>>1578299
why not both?

Anonymous

View Same Google ImgOps iqdb SauceNAO schonkopf_1.jpg, 13KiB, 184x184

Anonymous Thu 26 Nov 2020 01:35:59 No.1578319 Report

Quoted By:

>>1578317
Hey, don't do that.

Anonymous

Anonymous Thu 26 Nov 2020 01:39:10 No.1578321 Report

Quoted By:

>>1578313
lmao owned. these disc racers don't know anything about bikes

Anonymous

Anonymous Thu 26 Nov 2020 01:40:20 No.1578322 Report

Quoted By:

>>1578303
how the fuck plastic gonna creak you mental dental road toad

Anonymous

View Same Google ImgOps iqdb SauceNAO bottom-bracket-axle-bearings-Lf- (...).jpg, 37KiB, 1024x592

Anonymous Thu 26 Nov 2020 02:01:21 No.1578336 Report

Quoted By:

>>1578313
#not all press fits

Anonymous

Anonymous Thu 26 Nov 2020 02:38:21 No.1578351 Report

Quoted By:

>>1578290
And what do you think creates "torque", i.e. the force needed to tighten the thing? Friction caused by the threads being pressed together.

Just about every bearing in every machine in the world is installed by 'press fit', including the ones in the threaded cups of your bb. If interference fits were unreliable, the wheels on your car would fall off (>implying you can afford one)

>>1578313
Only if the frame is a piece of shit.

Anonymous

Anonymous Thu 26 Nov 2020 09:22:56 No.1578438 Report

Quoted By:

>>1578313
square taper doesnt creak because the threads hide the creak

Capcode	All Only User Posts Only Verified Posts Only Moderator Posts Only Manager Posts Only Admin Posts Only Developer Posts Only Founder Posts
Show Posts	All Only With Images Only Without Images Only Spoiler Images Only Non-Spoiler Images
Deleted Posts	All Only Deleted Posts Only Non-Deleted Posts
Ghost Posts	All Only Ghost Posts Only Non-Ghost Posts
Post Type	All Only Sticky Threads Only Opening Posts Only Reply Posts
Results	All Grouped By Threads
Order	Latest Posts First Oldest Posts First

On these archives

Your latest searches