>>1725827No, they aren't recessed. Honestly if I were to modify it to be, I would really just prefer to do both sides just for continuities sake.
>https://www.ebay.com/itm/203674921001Yeah something like this actually looks sick.
>for a lot of this period brake caliper clearance was very slim.Actually, I hadn't thought about this, and that would be quite the issue since I'm running 27's right now with 1 1/4"tires(which is what, like 32mm?) so I would be kind of limited. I'll have to look at what you mention.
Or, just end up going with a pad swap and calling it a day.
>>1725799>compare to the dimensions of the BR-6400Can't seem to find any actual measurements of any of this, but with the pad in the shoe it does look to be at least fairly similar. All of these do seem to be just a bit longer than the original, but I'm really unsure if they are really so long to make that much of a difference.
Completely forgot that I do have a similar bike that i swapped to dual pivots and put a longer pad on. I may just try those out, check dimensions, and go from there
That bit about the colored pads is good to note, actually.
