>>3384092Finally, cut the material of your choice. Three hints:
>Make 100% sure that you haven't mirrored the design by tracing the template upside down (I nearly did this, luckily I discovered right before I made a decisive cut)>Add screw holes only after applying glue. I measured them out beforehand but since I stretched the leather here and there to get it firmly in all corners, one hole was off by like 2mm and I had to do a large part over to get it to fit again>Use masking tape to cover the lens mount. You don't want to get dust or cuttings on your shutter, let alone glueStart on one side. Apply some glue on the camera (I used Bison kit) and even it out with an old, small paint brush (you can't reuse the brush bc it'll be glued). Apply the material and get it into all the corners using tools like the popsicle stick, backs of pens etc. Trim any excess using razor blades or something similarly sharp (don't want shabby edges)
