>>2614003>Well the first thing that comes to mind is that your lens is too wide.I suspected this too, I'll try with a 24mm equivalent instead of the 12mm equivalent & see if it improves. Looking at
>>2613885 on the first joint from the left, the top of the left most image is 'too high' while the bottom is 'too low' (so the whole image is too 'tall' compared to the next image) which leads me to think it isn't parallax but distortion/correction.
>Or maybe you're not overlapping enough?I'm fairly sure it's not that, 4x images was enough to cover 360 with ~20% overlap (which PTGui claims is roughly the minimum) & I got the same stitching issues with 4x images as with 12x images (which had plenty of overlap).
