/toy/ - Toys » Thread #11256672

[225 / 78 / 1]

2MiB, 1920x1440, AND MY AXE (Copy).jpg

Welcome to the Gunpla/Plamo Generalno

Gelgoog Guy !!XOac6frt+Ny Sat 07 Dec 2024 06:27:45 No.11256672 View View Reply Original Report

Quoted By:

>"If you're new, you're gonna fuck up. Don't worry! If you're experienced, don't make the new people worry!"

***READ THE GUIDE***

Discord
https://discord.gg/W973BmwERB

The guide:
Part 1 (Quick Start)
https://docs.google.com/document/d/e/2PACX-1vSBDfE8Iz-a86DZJCR5MHRW6tjkQX-y4-ZpUc_vHjRfx_i2FB0zR1usdrgUJ4wNTs1iDFZmTQHF66X_/pub

Part 2 (Deeper Dive)
https://docs.google.com/document/d/e/2PACX-1vQJG2SZo1O1PjExPrdU_-GnkrYTGiGLCgBcKaL4peEWxOGB4CNbpGaJBV1oF61eNE1lEhbQHYEAXLrw/pub

And a handy guide to other types of plamo: http://www.mediafire.com/view/1vf1aw7v91pz5pa/Airfix%20Model%20World%20Specia%20(Scale%20Modelling%20Step-By-Step).pdf
http://www.scalemodelguide.com

Some line art:
https://imgur.com/user/Gundaml1neart/posts

Previous thread:>>11229605

Anonymous

Anonymous Sat 07 Dec 2024 10:54:15 No.11256803 Report

Quoted By: >>11258031

I'm going to build a mega scale model next year, should I get the 79 or the unicorn? I only have room for one.

Anonymous

View Same Google ImgOps iqdb SauceNAO bas2725232.jpg, 62KiB, 950x760

Anonymous Sat 07 Dec 2024 11:12:52 No.11256821 Report

Quoted By: >>11256865 >>11256886 >>11256922 >>11257113

Pre-ordered. What did you think about the show? It was better than cowboy bebop.

Anonymous

View Same Google ImgOps iqdb SauceNAO vlcsnap-2024-10-24-00h11m15s425.jpg, 445KiB, 1920x1080

Anonymous Sat 07 Dec 2024 12:54:14 No.11256865 Report

Quoted By:

>>11256821
The Fat, Rancid dump I took was better than the shitflix cowgoy beslop.

Anonymous

Anonymous Sat 07 Dec 2024 13:39:19 No.11256886 Report

Quoted By:

>>11256821
Which new Gundam? The one with the zaku that has tires all over it?

Anonymous

View Same Google ImgOps iqdb SauceNAO 1558099022342.jpg, 73KiB, 1024x683

Anonymous Sat 07 Dec 2024 14:12:57 No.11256903 Report

Quoted By: >>11256904 >>11257113 >>11258172

Why did no one tell me you could just use an eraser to remove excess panel liner?

Anonymous

Anonymous Sat 07 Dec 2024 14:14:12 No.11256904 Report

Quoted By: >>11257020

>>11256903
You mean I don't have to crack out the knives or chemicals to clean up a bit of spill??

Anonymous

Anonymous Sat 07 Dec 2024 14:52:44 No.11256922 Report

Quoted By:

>>11256821
Makes me want to see the live action gundam already. Also this model came out already, I have one unbuilt.

Anonymous

Anonymous Sat 07 Dec 2024 17:08:22 No.11257020 Report

Quoted By:

>>11256904
Like a pencil on paper you can just... erase it

Anonymous

Anonymous Sat 07 Dec 2024 18:52:19 No.11257113 Report

Quoted By:

>>11256821
The show was nothing special. It was entertaining and I didn't hate it, but it wasn't mind blowing. The seething about the female protagonist or "DEI female infantry soldier" confuses me greatly, but I don't strongly desire to purchase a kit from the show either.

>>11256903
Different panel liners are chemically different, and will work differently on top of different painted surfaces. When I tried to use Gundam Marker on top of gloss coat (floor wax) for a hand piece, it wouldn't remove at all which is what caused me to switch to enamel panel wash for the rest of the kit. Yet Gundam Marker will remove with saliva and finger rubbing on top of bare plastic.

A lot of your knowledge will unfortunately come from trial and error, because there's so many possible combinations of ways to paint and panel line your kits and not everybody will have committed their thoughts and experiences to easily searched R*ddit posts and YT videos. But at least tried and true techniques can be readily found almost everywhere and reliably duplicated.

Michigooner

View Same Google ImgOps iqdb SauceNAO G1 Michigan Liger Tail Armored C (...).jpg, 422KiB, 1200x1200

Michigooner Sun 08 Dec 2024 03:11:25 No.11257744 Report

Quoted By: >>11257879 >>11257980

My Babygirl <3

Anonymous

Anonymous Sun 08 Dec 2024 05:35:01 No.11257879 Report

Quoted By: >>11257930

>>11257744
Mfs who call full grown men "babygirl" need to be shot

Anonymous

Anonymous Sun 08 Dec 2024 06:46:59 No.11257930 Report

Quoted By:

>>11257879
just because you are in the closet doesn't mean we have to act like squares and can't joke around

Anonymous

View Same Google ImgOps iqdb SauceNAO P_20240917_181725~01.jpg, 399KiB, 1152x2560

Anonymous Sun 08 Dec 2024 07:18:06 No.11257950 Report

Quoted By:

>>11256502

You are in luck
I just finished this few months ago

In term of issue, it is the pegs/pegs holes. A lot of them are way too tight. I would recommend cut the side of peg holes with with nipper so you can push the parts in. But don't over do it

Besides this, I did not encounter any other issues.

As for what you are saying about Amazon. no that's not a western release.
That is the new anime accurate version. They switch the black part on the bodies to show accurate red

I really don't know why they did not do this in the first place.

Anonymous

Anonymous Sun 08 Dec 2024 08:03:23 No.11257980 Report

Quoted By:

>>11257744
i also goon to quadlegs.

Anonymous

Anonymous Sun 08 Dec 2024 08:59:09 No.11258031 Report

Quoted By:

>>11256803
Unicorn has a lot of presence. It looks like you got the PG but not as fiddly.

Anonymous

View Same Google ImgOps iqdb SauceNAO endless spring.png, 835KiB, 800x800

Anonymous Sun 08 Dec 2024 09:29:19 No.11258051 Report

Quoted By: >>11258058 >>11258154

>tfw can't stop buying scratchbuild materials off aliexpress
what is this disease called?

Anonymous

Anonymous Sun 08 Dec 2024 09:39:13 No.11258058 Report

Quoted By: >>11258067

>>11258051
Don't you have to buy large quantities for them to be worth shipping?

Anonymous

Anonymous Sun 08 Dec 2024 09:49:38 No.11258067 Report

Quoted By:

>>11258058
Not really. Flexible spring (the kind you can use for energy cables and such) costs about $2-3 for a meter with free shipping if you buy $10 worth of it (doesn't have to be all the same kind).
Now compare that with the HQParts spring length and price.

Anonymous

Anonymous Sun 08 Dec 2024 12:48:10 No.11258154 Report

Quoted By:

>>11258051
I just use cheap bass strings

Anonymous

Anonymous Sun 08 Dec 2024 13:22:02 No.11258172 Report

Quoted By: >>11258867

>>11256903
>use eraser on pour liner smudges that's over a matte clear coat
>it actually erases
Though I can't tell if it rubs the clear coat off as well.

Gelgoog Guy !!XOac6frt+Ny

View Same Google ImgOps iqdb SauceNAO Group Build (2019_01_03 15_19_20 (...).jpg, 191KiB, 4113x583

Gelgoog Guy !!XOac6frt+Ny Sun 08 Dec 2024 16:44:00 No.11258274 Report

Quoted By: >>11258493

==MELEE GROUPBUILD==

Build/paint a robot with a loadout focused on melee combat! Anything from shields to swords to lances to axes to bare fists is fair game. There's no room for ranged weaponry here, however, so anything resembling a rifle, rocket launcher, cannon, pistol, or any other ranged weapon is a no-go (Small ranged weapons that are built into the kit itself like head vulcans are ok, however).

More clarification here:
>If the body part has a built-in ranged weapon (head/chest vulcans, claw beams, etc), then that's fine. If it's a separate part like the Alex's arm vulcans it's best to leave those off.
>Melee weapons with in-universe ranged capabilities (Like the Kimaris's lance or the Gyan's shield) are fair game too.
>Any scale, any brand, and any type of kit is fair game here. That means anything from Gundams to girlpla to miniatures are all free to use.

Send your entries to [email protected] with at least 5 photos of your finished build along with any WIP photos and a description of your entry.

START: 12/8/24
END: 3/31/25

Anonymous

Anonymous Sun 08 Dec 2024 21:24:38 No.11258493 Report

Quoted By: >>11258568 >>11258793 >>11258797

>>11258274
>There's no room for ranged weaponry here, however, so anything resembling a rifle, rocket launcher, cannon, pistol, or any other ranged weapon is a no-go
I don't usually take part in group builds but what about using a gun like a club?

Gelgoog Guy !!XOac6frt+Ny

Gelgoog Guy !!XOac6frt+Ny Sun 08 Dec 2024 23:35:03 No.11258568 Report

Quoted By: >>11258723

>>11258493
You'd want to check with Groupbuild Dude himself, I just copy/paste his stuff for the group builds these days.

Anonymous

Anonymous Mon 09 Dec 2024 02:14:43 No.11258723 Report

Quoted By: >>11258750

>>11258568
Eh, I'm curious but so curious that I'd go out of my way to find out.

Anonymous

Anonymous Mon 09 Dec 2024 03:07:32 No.11258750 Report

Quoted By: >>11258797

>>11258723
I think they'd accept that entry as long as it was clear the gun was not functional or being used for its intended purpose. Could have a busted barrel or something to really make that clear.

Anonymous

Anonymous Mon 09 Dec 2024 03:37:20 No.11258785 Report

Quoted By: >>11258828 >>11259978 >>11260029

Any idea for a color scheme for a gundam mk2 ? I'm lacking of imagination

Groupbuild Dude !5vxZSjZKP6

View Same Google ImgOps iqdb SauceNAO Red_Hot_Blaze_(Close_Combat).png, 2MiB, 1920x1080

Groupbuild Dude !5vxZSjZKP6 Mon 09 Dec 2024 03:42:31 No.11258793 Report

Quoted By:

>>11258493
Ehhhh, I'm honestly not a fan of the idea. The idea is to build something specifically meant for melee, while using a rifle as a club feels more like a last-resort kind of thing. It'd be like calling the Ez-8 a Melee suit because it used it's arm as a club the one time.

Groupbuild Dude !5vxZSjZKP6

View Same Google ImgOps iqdb SauceNAO Red_Hot_Blaze_(Close_Combat).png, 2MiB, 1920x1080

Groupbuild Dude !5vxZSjZKP6 Mon 09 Dec 2024 03:43:43 No.11258797 Report

Quoted By:

Anonymous

Anonymous Mon 09 Dec 2024 04:15:00 No.11258828 Report

Quoted By: >>11258984

>>11258785
i know this is kinda out there but:
titans colors

Anonymous

Anonymous Mon 09 Dec 2024 04:52:51 No.11258867 Report

Quoted By:

>>11258172
you should be adding another layer of clear coat ontop so it shouldn't matter
What im worried about is my paintjobs

Anonymous

Anonymous Mon 09 Dec 2024 09:57:29 No.11258984 Report

Quoted By: >>11259209

>>11258828
It's already a titan color one, it's a gift cause "hey anon I saw you liked those japanese robot so here one"
I already have it, both aeug and titan color

Anonymous

View Same Google ImgOps iqdb SauceNAO 1713183147809091.png, 720KiB, 527x720

Anonymous Mon 09 Dec 2024 17:48:29 No.11259209 Report

Quoted By:

>>11258984
damn.
how about zero-shiki colors

Anonymous

View Same Google ImgOps iqdb SauceNAO 1239.jpg, 26KiB, 474x421

Anonymous Tue 10 Dec 2024 07:02:27 No.11259790 Report

Quoted By: >>11260027

Can the gun come off? Asking for science.

Anonymous

Anonymous Tue 10 Dec 2024 13:16:11 No.11259978 Report

Quoted By: >>11259982

>>11258785
zeon color
amuro ray color
char color
real type color

Anonymous

Anonymous Tue 10 Dec 2024 13:18:42 No.11259982 Report

Quoted By:

>>11259978
CENTURY COLOUR MILLION COLOUR

Anonymous

Anonymous Tue 10 Dec 2024 14:40:42 No.11260027 Report

Quoted By:

>>11259790
by the youtube videos, yes.

Anonymous

View Same Google ImgOps iqdb SauceNAO DD13ojXVwAAk6_F.jpg, 217KiB, 972x1200

Anonymous Tue 10 Dec 2024 14:42:32 No.11260029 Report

Quoted By:

>>11258785
g3 colors

Anonymous

View Same Google ImgOps iqdb SauceNAO 30mm-exm-e7c-spinatia-commando-t (...).jpg, 104KiB, 600x600

Anonymous Wed 11 Dec 2024 01:45:36 No.11260737 Report

Quoted By: >>11260852 >>11260949

Bit new to this, have built some entry grades and a few 30MM kits.
My next box is picrel and I'm unsure what the best panel line color would be.
I know for red soles on gundams brown is the preferred color. But for a kit mostly comprised of red, should i stick to a brown pen all over?
I got some tamiya accent in black and grey along with the trio of panel line markers.

Gelgoog Guy !!XOac6frt+Ny

View Same Google ImgOps iqdb SauceNAO PXL_20210710_202413936.PORTRAIT (...).jpg, 1MiB, 1105x1440

Gelgoog Guy !!XOac6frt+Ny Wed 11 Dec 2024 03:50:10 No.11260852 Report

Quoted By: >>11261229

>>11260737
Brown on red is generally my preference, though on smaller amounts of red I do tend to use black.

Anonymous

Anonymous Wed 11 Dec 2024 05:37:14 No.11260949 Report

Quoted By:

>>11260737
use black on this one
i swear its going to look much better than brown

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_20241208_134449.jpg, 3MiB, 3264x2448

Anonymous Wed 11 Dec 2024 13:19:06 No.11261116 Report

Quoted By: >>11261229 >>11261295 >>11264550 >>11265062

Finally done

Anonymous

View Same Google ImgOps iqdb SauceNAO 20241210_055807.jpg, 4MiB, 4000x3000

Anonymous Wed 11 Dec 2024 16:54:24 No.11261228 Report

Quoted By: >>11261396 >>11261476 >>11261567

Guess who (should be easy)

Anonymous

Anonymous Wed 11 Dec 2024 16:56:20 No.11261229 Report

Quoted By:

>>11261116
Badass
>>11260852
I like the backdrop! Model is good but you knew that already.

Anonymous

View Same Google ImgOps iqdb SauceNAO 20241209_142311.jpg, 3MiB, 4000x3000

Anonymous Wed 11 Dec 2024 16:59:45 No.11261231 Report

Quoted By:

Not finished, but I love the Jegan suits so much. Maybe I will find a Stark Jegan for my birthday.

Anonymous

Anonymous Wed 11 Dec 2024 18:41:19 No.11261295 Report

Quoted By: >>11261400

>>11261116
Man, I need to grab that chunky Gundam one day along with MG Virtue.

Anonymous

Anonymous Wed 11 Dec 2024 20:39:17 No.11261396 Report

Quoted By: >>11261471

>>11261228
looks like atlas colors

Anonymous

Anonymous Wed 11 Dec 2024 20:49:32 No.11261400 Report

Quoted By: >>11264952

>>11261295
I just wish it were easier to get ahold of MG Virtue for less than like $90 USD. I understand why they don't want to sell it for any less than that, but it's also the last one I need to complete my collection of 00 S1 Gundams.

Anonymous

Anonymous Wed 11 Dec 2024 22:26:27 No.11261471 Report

Quoted By:

>>11261396
I will give you a hint: blonde pilot

Anonymous

Anonymous Wed 11 Dec 2024 22:33:02 No.11261476 Report

Quoted By: >>11261856

>>11261228
Big Goose

Anonymous

Anonymous Thu 12 Dec 2024 00:06:03 No.11261567 Report

Quoted By: >>11263352

>>11261228
Is that the Pbandai red leo?

Anonymous

Anonymous Thu 12 Dec 2024 00:59:19 No.11261618 Report

Quoted By: >>11261982

The vengeance hg kits look cool. Should I get them?

Anonymous

Anonymous Thu 12 Dec 2024 06:17:26 No.11261856 Report

Quoted By:

>>11261476
You got it.

Anonymous

Anonymous Thu 12 Dec 2024 10:51:38 No.11261982 Report

Quoted By:

>>11261618
yea

Anonymous

View Same Google ImgOps iqdb SauceNAO 20241212_005624.jpg, 2MiB, 4000x3000

Anonymous Thu 12 Dec 2024 18:02:59 No.11262409 Report

Quoted By:

The EW MG Tallgeese has a working Dober Gun that cycles with a spring. PITA but neat kit, especially the vernier assembly.

Anonymous

View Same Google ImgOps iqdb SauceNAO 20241212_134555.jpg, 3MiB, 4000x3000

Anonymous Thu 12 Dec 2024 18:47:24 No.11262468 Report

Quoted By:

I'm thinking the Leo is the suit for this display.

Anonymous

View Same Google ImgOps iqdb SauceNAO 20241212_135044.jpg, 3MiB, 4000x3000

Anonymous Thu 12 Dec 2024 18:51:29 No.11262476 Report

Quoted By: >>11262546

The Goose is loose.

Anonymous

Anonymous Thu 12 Dec 2024 20:11:01 No.11262546 Report

Quoted By:

>>11262476
Sick

Anonymous

View Same Google ImgOps iqdb SauceNAO gpla.jpg, 1MiB, 4080x1731

Anonymous Thu 12 Dec 2024 21:27:59 No.11262604 Report

Quoted By: >>11262609 >>11262894 >>11262969 >>11273611

>he doesn't thrift

Anonymous

Anonymous Thu 12 Dec 2024 21:31:22 No.11262609 Report

Quoted By: >>11262667

>>11262604
I have thrifted before, actually. Bought a couple of opened and partially built kits from the /bst/ thread that are now sitting in my backlog.

Anonymous

Anonymous Thu 12 Dec 2024 22:20:52 No.11262667 Report

Quoted By:

>>11262609
Nice. This is the first gundam I've found.

I picked up a warhammer set recently for $3, and the avg ebay sales price is ~150+. Decent legos too.

Legos are a good store of value imo.

Anonymous

Anonymous Fri 13 Dec 2024 01:15:34 No.11262894 Report

Quoted By:

>>11262604
Is this a chain store or somewhere local? The only place that stocks Gunpla is Barnes and Noble here. I could try Hobby Lobby but that's much further away.

Anonymous

Anonymous Fri 13 Dec 2024 02:38:34 No.11262969 Report

Quoted By: >>11263029

>>11262604
How many times do you go before finding anything good?

Anonymous

Anonymous Fri 13 Dec 2024 04:13:26 No.11263029 Report

Quoted By:

>>11262969
I use to thrift hint everyday, never found anything gundam, made alot flipping old video games though. You could check goodwill auctions but they tend to have old mits. Or half assembled or half the parts lost. So be aware of that. But you can find some cool stuff there.

Anonymous

View Same Google ImgOps iqdb SauceNAO Screenshot_2024-12-13-15-14-50-4 (...).jpg, 778KiB, 1080x2400

Anonymous Fri 13 Dec 2024 04:45:51 No.11263059 Report

Quoted By: >>11263065 >>11264445

Boys, this shit has got to be a scam right? It's too cheap even for a knockoff

Anonymous

Anonymous Fri 13 Dec 2024 04:51:58 No.11263065 Report

Quoted By:

>>11263059
yeah that seems too low
the daban bootleg is on mofiho for 93 usd + $36 shipping for a total of around 130USD or 200 AUD.

Anonymous

Anonymous Fri 13 Dec 2024 16:01:55 No.11263352 Report

Quoted By:

>>11261567
Are those worth pursuing? What makes pbandai the shit?

Anonymous

View Same Google ImgOps iqdb SauceNAO 11153203b7.png, 627KiB, 1000x1000

Anonymous Fri 13 Dec 2024 16:38:18 No.11263365 Report

Quoted By:

>smol resin nipper

Anonymous

View Same Google ImgOps iqdb SauceNAO Imagepipe_0.jpg, 483KiB, 2109x1582

Anonymous Sat 14 Dec 2024 00:44:03 No.11263680 Report

Quoted By:

My GM Sniper II came with a little buddy.

Anonymous

View Same Google ImgOps iqdb SauceNAO 20241213_230126.jpg, 2MiB, 4000x3000

Anonymous Sat 14 Dec 2024 04:20:12 No.11263853 Report

Quoted By:

Vantage point

Anonymous

View Same Google ImgOps iqdb SauceNAO blue.jpg, 455KiB, 1504x1832

Anonymous Sat 14 Dec 2024 12:25:07 No.11264015 Report

Quoted By: >>11264027 >>11264331

I would like to use the christmas time to build the Heavyarms but I already know that the chest stickers will suck so I would like to buy a gundam marker to paint it instead before the holidays screw over shipping.

I would like to know which blue you think would fit better.

Anonymous

Anonymous Sat 14 Dec 2024 12:42:36 No.11264027 Report

Quoted By:

>>11264015
Personally I'd go with 06

Anonymous

Anonymous Sat 14 Dec 2024 21:01:34 No.11264331 Report

Quoted By: >>11264666

>>11264015
06 would be more likely to be useful for other Gundam, the metallic might look out of place but then again the base blue might look bland

Anonymous

Anonymous Sat 14 Dec 2024 23:58:33 No.11264445 Report

Quoted By:

>>11263059
Why would it be a scam? Daban PGU costs 75 AUD in China. They charge you 30 more for shipping without the original box. That's normal pricing for Aliexpress.

Anonymous

Anonymous Sun 15 Dec 2024 00:01:15 No.11264448 Report

Quoted By: >>11264492 >>11264597 >>11272787

Is there any alternative to tamiya panel line accent that doesnt eat plastic? I don't want my kit to break apart in a few months.

Anonymous

View Same Google ImgOps iqdb SauceNAO hobby_7193_pmr_weathering_color_ (...).png, 194KiB, 300x523

Anonymous Sun 15 Dec 2024 01:16:47 No.11264492 Report

Quoted By: >>11264516

>>11264448
>I don't want my kit to break apart in a few months.
If it breaks at all, it will break right when you apply the panel liner, there is no delayed action.

Mr Weathering or any artist oil paint thinned with odorless turpenoid will not damage plastic.

Anonymous

Anonymous Sun 15 Dec 2024 02:04:52 No.11264516 Report

Quoted By: >>11264533 >>11264608

>>11264492
you make it sound like some violent sudden cracking action that you will definitely notice. panel liner can seep between assembled pieces or into crevices and eat it from the inside out without you seeing it or noticing. I have had this happen several times.

Anonymous

Anonymous Sun 15 Dec 2024 02:45:39 No.11264533 Report

Quoted By:

>>11264516
>assembled pieces
That's why I panel line before any assembly so nothing gets in any micro fractures. I also don't drown the parts in panel line liquid.

Anonymous

Anonymous Sun 15 Dec 2024 03:33:37 No.11264550 Report

Quoted By:

>>11261116
Swole af

Anonymous

Anonymous Sun 15 Dec 2024 05:36:07 No.11264597 Report

Quoted By: >>11264610

>>11264448
can't you make an acrylic wash / panel liner just by thinning the fuck out of acrylic paints? probably not with water though due to surface tension shit

Anonymous

Anonymous Sun 15 Dec 2024 05:54:06 No.11264608 Report

Quoted By:

>>11264516
>eat it from the inside out without you seeing it or noticing
_Crack_ it from the inside, specifically the areas under stress (peg/hole connections etc). Cracking happens within minutes (before the thinner evaporates), the fact that you fail to notice it is really your issue.

Anonymous

Anonymous Sun 15 Dec 2024 05:56:23 No.11264610 Report

Quoted By:

>>11264597
>can't you make an acrylic wash / panel liner just by thinning the fuck out of acrylic paints
You certainly can, but you will regret it when it comes the time to clean it up. Unlike oil, acrylic washes are not easy to clean after they are fully dried and sitting there and watching them like a hawk for just the right moment is not really fun.

Anonymous

Anonymous Sun 15 Dec 2024 08:21:45 No.11264666 Report

Quoted By:

>>11264331
>06 would be more likely to be useful for other Gundam
I have zero ideas where else I would use it other than maybe try painting over stress marks on my first gunpla kits.

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_2026.jpg, 2MiB, 3528x3464

Anonymous Sun 15 Dec 2024 15:50:26 No.11264860 Report

Quoted By: >>11264932

Hello anons. Can anyone recommend some static alternatives to RG GaoGaiGar’s hands? I’ve got a printer so any purchasable or digital file you know of. I fucking hate these things and they detract from what is otherwise actually an extremely playable figure.

Anonymous

Anonymous Sun 15 Dec 2024 17:54:25 No.11264932 Report

Quoted By: >>11265262

>>11264860
I would like to know this too. The hands on mine are a complete nightmare.

Anonymous

Anonymous Sun 15 Dec 2024 18:09:02 No.11264952 Report

Quoted By: >>11265018

>>11261400
buy from someone who built it already

Anonymous

Anonymous Sun 15 Dec 2024 19:19:40 No.11265018 Report

Quoted By:

>>11264952
But half the fun is building.

Anonymous

Anonymous Sun 15 Dec 2024 20:07:15 No.11265062 Report

Quoted By:

>>11261116
fantastic panel lining

Anonymous

Anonymous Sun 15 Dec 2024 20:53:05 No.11265117 Report

Quoted By: >>11266044

Is it true that kits with the red bandai logo are straight up bad?

Anonymous

Anonymous Sun 15 Dec 2024 22:51:38 No.11265262 Report

Quoted By:

>>11264932
It’s me again but I did find this
https://cults3d.com/en/3d-model/various/rg-gaogaigar-hands-set-1
Gotta look at it more closely but this seems to be literally what I was after

Anonymous

View Same Google ImgOps iqdb SauceNAO 20241215_174210.jpg, 3MiB, 4000x3000

Anonymous Sun 15 Dec 2024 23:04:32 No.11265280 Report

Quoted By: >>11266381

This is my crown jewel of the collection. Hardest one to acquire so far, my final wish is to get one of the big Neo Zeongs from a long time ago. I can't justify 1k for a dust collector.

Anonymous

View Same Google ImgOps iqdb SauceNAO 20241215_174052.jpg, 3MiB, 4000x3000

Anonymous Sun 15 Dec 2024 23:08:28 No.11265287 Report

Quoted By: >>11266381 >>11267915

Anonymous

View Same Google ImgOps iqdb SauceNAO 20241215_192440.jpg, 3MiB, 4000x3000

Anonymous Mon 16 Dec 2024 13:28:18 No.11265850 Report

Quoted By: >>11266381

Anonymous

View Same Google ImgOps iqdb SauceNAO PXL_20241216_004631905.jpg, 2MiB, 3072x4080

Anonymous Mon 16 Dec 2024 17:20:45 No.11265961 Report

Quoted By: >>11265974 >>11266011

I went to a new weeb store that recently opened in my city and near the gunpla displays they had these big ass mecha sets. They kinda look more like Legos than a model kits, but I'm curious about them. It seems like some shit you'd find on Temu but I'm wondering if it's just cheap chink shit or is the quality decent and fun to build.

Anyone ever look into these or am I in the wrong thread here?

Anonymous

Anonymous Mon 16 Dec 2024 17:40:45 No.11265974 Report

Quoted By: >>11266013 >>11266049

>>11265961
Definitely knockoff Lego. I recognize some Exo-Force building techniques, actually.

Anonymous

Anonymous Mon 16 Dec 2024 18:22:28 No.11266011 Report

Quoted By:

>>11265961
don't know about that company in particular but there are knockoff Lego companies who offer better quality for significant less money than Lego.

Anonymous

Anonymous Mon 16 Dec 2024 18:23:41 No.11266013 Report

Quoted By:

>>11265974
I might pick one up out of curiosity just to see how the plastic quality feels and if they're anything decent. For that piece count, the price doesn't seem terrible compared to Lego, but they honestly look like more complicated Bionicles. They had a bunch of them, probably 8-10ish of those larger sets and then probably 20-25 separate, smaller sets.

Anonymous

Anonymous Mon 16 Dec 2024 18:50:04 No.11266044 Report

Quoted By: >>11266056

>>11265117
it's worse, they are bootlegs. Only blue label are original.

Anonymous

Anonymous Mon 16 Dec 2024 19:00:17 No.11266049 Report

Quoted By:

>>11265974
Building exo force as a kid is probably what ignited my robot passion. I wonder if it's cheap enough to be worth get any of those old sets and building them up in current year.

Anonymous

Anonymous Mon 16 Dec 2024 19:10:16 No.11266056 Report

Quoted By:

>>11266044
you see I know you are lying

Anonymous

View Same Google ImgOps iqdb SauceNAO 20241216_151900.jpg, 3MiB, 4000x3000

Anonymous Mon 16 Dec 2024 20:21:10 No.11266120 Report

Quoted By:

What is your favorite gimmick that you have seen? For example, this RG 78 has the jet fighter built into it even though you will never see it.

Anonymous

Anonymous Tue 17 Dec 2024 02:42:44 No.11266381 Report

Quoted By: >>11266755

>>11265280
>>11265287
>>11265850
what a swell jim
what model is that? looks like the white dingo beam rifle but it's not the color for that

Anonymous

View Same Google ImgOps iqdb SauceNAO 20241217_093714.jpg, 3MiB, 4000x3000

Anonymous Tue 17 Dec 2024 14:38:00 No.11266755 Report

Quoted By:

>>11266381
He's from the 08th MS Team

Anonymous

View Same Google ImgOps iqdb SauceNAO 196_5174_o_1gdhp7tnr15861o1f1s3n (...).jpg, 209KiB, 1100x1100

Anonymous Wed 18 Dec 2024 00:33:20 No.11267214 Report

Quoted By: >>11267580 >>11267587 >>11267944 >>11268018

This is like my third kit, should I do black or grey panel lining, do you think? I wanna do it as I go this time, seems like it'd be easier

Anonymous

Anonymous Wed 18 Dec 2024 11:50:17 No.11267580 Report

Quoted By: >>11267944

>>11267214
Paint it in trans colours

Anonymous

Anonymous Wed 18 Dec 2024 12:06:25 No.11267587 Report

Quoted By: >>11268167

>>11267214
I like black on white personally, stands out more.

Anonymous

Anonymous Wed 18 Dec 2024 19:24:39 No.11267915 Report

Quoted By: >>11268036

>>11265287
Man, I wish I could get my hands on that GM sniper Mk 1, I can't even find a store that sells it.

Anonymous

Anonymous Wed 18 Dec 2024 19:47:47 No.11267944 Report

Quoted By: >>11268167

>>11267580
what do you mean? The Aerial looks great like it is. No need to paint it outside of just panel lining.

>>11267214
Grey on the white parts and black on the colored parts. Be carefull with the yellow knee parts, they refused to take the color from my pen.

Anonymous

View Same Google ImgOps iqdb SauceNAO image.png, 172KiB, 598x248

Anonymous Wed 18 Dec 2024 21:36:45 No.11268006 Report

Quoted By: >>11268092

Friends, is it possible to purchase these hair parts alone? I have only found them as part of a $50 muscuto parts set MGM-70. I don't see it on their hair parts sets.

Anonymous

Anonymous Wed 18 Dec 2024 22:00:32 No.11268018 Report

Quoted By: >>11268167

>>11267214
white parts take grey, colour parts take black, yellow specifically takes brown

Anonymous

Anonymous Wed 18 Dec 2024 22:32:52 No.11268036 Report

Quoted By:

>>11267915
Are you in the US? How much are you willing to pay?

Anonymous

View Same Google ImgOps iqdb SauceNAO S580a76c8224b4db888653b96816ae1dcU.png, 579KiB, 750x750

Anonymous Wed 18 Dec 2024 23:13:46 No.11268092 Report

Quoted By:

>>11268006
https://www.aliexpress.com/w/wholesale-SH-Studio-upgrade-parts.html?spm=a2g0o.detail.search.0

Anonymous

View Same Google ImgOps iqdb SauceNAO 20241218_184848.jpg, 3MiB, 4080x3060

Anonymous Thu 19 Dec 2024 00:51:24 No.11268167 Report

Quoted By: >>11268177 >>11268227 >>11268233

>>11267587
>>11267944
>>11268018

Thanks, lads. One other question: it gives me an option to use either these ABS pices for the patterned chest piece or use a piece of transparent plastic with the pattern on the inside of a sticker, but it seems like they look pretty much identical--what's the difference? I ised the ABS pieces because that seemed like less work but I started wondering if there's some downside I'm not aware of

Anonymous

View Same Google ImgOps iqdb SauceNAO DSC04984-scaled.jpg, 318KiB, 2560x1707

Anonymous Thu 19 Dec 2024 01:05:52 No.11268177 Report

Quoted By: >>11268245

>>11268167
They are not the same at all in practice. The printed ones use a new Bandai printing tech and look much better than using the stickers (shines brighter, closer to the surface, and more visible). They only give you the sticker option so you can do the deactivated black version, I'm really not sure why they even gave you the lit up option as a sticker.

Anonymous

Anonymous Thu 19 Dec 2024 02:11:12 No.11268227 Report

Quoted By: >>11268245

>>11268167
I heard the stickers might be a bit challenging or bad for a kit built out-of-box, how is it so far?

Anonymous

Anonymous Thu 19 Dec 2024 02:25:37 No.11268233 Report

Quoted By: >>11268245

>>11268167
transparent plastic also allows you to paint your own shit underneath or make custom decals or some shit

Anonymous

Anonymous Thu 19 Dec 2024 02:39:28 No.11268245 Report

Quoted By: >>11268254 >>11268282

>>11268227
No problems so far. There are definitely some small ones but I got them on just fine with tweezers.

>>11268233
>>11268177
Gotcha, thanks

Anonymous

Anonymous Thu 19 Dec 2024 02:45:37 No.11268254 Report

Quoted By: >>11268282

>>11268245
Alright, thank you. I've had an easy time with HG stickers but not for SD World stuff. Hopefully it's also going to be insanely obvious which ones are the powered and deactivated stickers. Here's hoping your build goes well!

Anonymous

View Same Google ImgOps iqdb SauceNAO 20241218_211002.jpg, 2MiB, 4080x3060

Anonymous Thu 19 Dec 2024 03:11:31 No.11268282 Report

Quoted By: >>11268343 >>11269328

>>11268245
>>11268254
I'd like to retract this statement because holy hell these are the size of a mosquito's dick and one of them flew off the sheet while I was trying to pull it away from its neighbor and I'm pretty sure I will never see it again

Anonymous

Anonymous Thu 19 Dec 2024 04:08:41 No.11268334 Report

Quoted By:

I missed the Dragon Gundam on P-Bandai. I know the Rose and Maxter went up for a second order, does anyone know how long it was between those runs?

Anonymous

Anonymous Thu 19 Dec 2024 04:18:25 No.11268343 Report

Quoted By:

>>11268282
That really sucks anon, I hope you're still somehow able to find it, or at least marker it

Anonymous

View Same Google ImgOps iqdb SauceNAO NErj76PuBfSW4aA2Xxqeh8yJMFQHbntm.jpg, 164KiB, 800x700

Anonymous Thu 19 Dec 2024 13:05:16 No.11268613 Report

Quoted By: >>11268797 >>11268830

So in don't build model kits, but I just discovered that Good Smile made two kits in the MODEROID series from Gunparade March. One of my favorite mecha series.

Does anyone here own these kits, can you tell me how they are? And what the difficult level is for a beginner?

Anonymous

Anonymous Thu 19 Dec 2024 16:24:26 No.11268797 Report

Quoted By: >>11268815

>>11268613
I'd say youre better off googling a review. There aren't many people in this thread clamouring to get their hands on moderoid kits.

Anonymous

Anonymous Thu 19 Dec 2024 16:39:23 No.11268815 Report

Quoted By: >>11268826

>>11268797
> There aren't many people in this thread clamouring to get their hands on moderoid kits.
Oh how come?

Anonymous

Anonymous Thu 19 Dec 2024 16:58:24 No.11268826 Report

Quoted By:

>>11268815
They're pretty expensive for what you get because they are made out of more obscure mecha with smaller numbers of customers than say, gundam.
They aren't often bad kits, they have tight enough joints, usually need a small amount of paint. But for any given kit you would be hard pressed to find someobody who has built the specific one youre looking at.

Anonymous

Anonymous Thu 19 Dec 2024 17:04:03 No.11268830 Report

Quoted By:

>>11268613
It's honestly one of the weaker ones, like, a 5/10 at best and that comes from someone who fucking loves Moderoid kits.
It's relatively small like most of GSC's real robot Moderoids, has rather basic early-2000 engineering and absolutely fucktarded ankle-joints.
Seriously, I have no idea what they were smoking when they made those.
They're Revoltech-esque balljoints but the pin that goes into the foot is square (and therefore fixed) and not in the center of the joint so even if you sand it round it doesn't really do much.
You can only rock the ankle back and forth a bit with a different joint below the calf.

It's basically one of those "well, it's not like you have many other options" kits that you probably only begrudgingly buy.

Anonymous

View Same Google ImgOps iqdb SauceNAO blood_angels_tallgeese_2.jpg, 1MiB, 1500x1902

Anonymous Fri 20 Dec 2024 02:53:06 No.11269321 Report

Quoted By: >>11269337 >>11269348 >>11269376 >>11272697

>go to the office for the first time in two months (game company)
>there was apparently some kind of in-company event a while ago and coworker won an HG Dilanza
>she doesn't give a shit about gunpla but knows I paint minis so offloads it onto me
Gonna try painting it in desert camo this weekend. Picrelated is my only other gunpla kit.

Anonymous

Anonymous Fri 20 Dec 2024 03:01:41 No.11269328 Report

Quoted By: >>11269779

>>11268282
Pull a stocking over your vacuum and sweep with it around the room. The stocking should catch the bit.

Gelgoog Guy !!XOac6frt+Ny

View Same Google ImgOps iqdb SauceNAO CH-53.jpg, 42KiB, 800x577

Gelgoog Guy !!XOac6frt+Ny Fri 20 Dec 2024 03:11:40 No.11269337 Report

Quoted By: >>11269348 >>11269387

>>11269321
Could go for something like this, one of my favorite desert schemes.

Anonymous

View Same Google ImgOps iqdb SauceNAO Steelrainshoot4.jpg, 1MiB, 3257x2505

Anonymous Fri 20 Dec 2024 03:26:38 No.11269348 Report

Quoted By: >>11269387

>>11269321
>>11269337
Love me desert camo

Anonymous

Anonymous Fri 20 Dec 2024 03:57:33 No.11269376 Report

Quoted By: >>11269387

>>11269321
the goose is kino
are you using it as proxy for something?

Anonymous

View Same Google ImgOps iqdb SauceNAO Screenshot_20241220-130336.png, 636KiB, 836x870

Anonymous Fri 20 Dec 2024 04:06:33 No.11269387 Report

Quoted By:

>>11269337
>>11269348
Was thinking something like picrelated. I like the stark contrast.
>>11269376
Thanks. I got the kit just to check out the differences between gunpla kits and 40k minis, so I don't use it for anything. It just stands on my work desk at the office.

Anonymous

View Same Google ImgOps iqdb SauceNAO 20241105_113414_HDR~2.jpg, 395KiB, 1836x1418

Anonymous Fri 20 Dec 2024 08:29:29 No.11269528 Report

Quoted By:

How are some of the weird Zeta mobile suits? I've been eyeing them for awhile, but they're older kits. I have The O, which didn't get a remake, but honestly isn't bad. Minor gripes like the hands, but overall fine. I also have the remastered Quebley, which might be my favorite MS, and I even managed to get a funnel effect kit. MG of both are on my wishlist, though I doubt I'll get my hands on an O for a reasonable price. I have the PBandai 3set of Zeta, Hyaku, and Mkii ordered so that side is covered.

It's the things like Palace Athene, Psycho Gundam, Asshimar, Messala, ect. From what I can tell, they're older kits, so I'm unsure.

Anonymous

Anonymous Fri 20 Dec 2024 12:09:24 No.11269615 Report

Quoted By: >>11269760 >>11269785 >>11269786 >>11271489

Any tips for sanding down nubs?

Anonymous

Anonymous Fri 20 Dec 2024 16:51:10 No.11269760 Report

Quoted By:

>>11269615
Glass file.

Anonymous

Anonymous Fri 20 Dec 2024 17:14:22 No.11269779 Report

Quoted By:

>>11269328
Oh shit that's a great idea

Anonymous

Anonymous Fri 20 Dec 2024 17:19:11 No.11269785 Report

Quoted By: >>11269795 >>11269995 >>11270043

>>11269615
Don't press in very hard, be gentle to reduce the stress marks
Don't be afraid to fuck the surface up a little then sand it out. If you're gonna make it truly flush, the file is gonna hit the part, it's unavoidable.
I find I have the best results by like... "petting" it with the file, only dragging it in one direction
Remember that you're super zoomed in and most likely no one is ever gonna notice a small mistake when they look at the whole model

Personally I go File -> 1,000 (sometimes skip this if it's clean enough -> 2,000 -> 4,000 -> 6,000 -> 8,000 -> 10,000 but that's probably overkill (and I don't paint my models)

Anonymous

Anonymous Fri 20 Dec 2024 17:20:38 No.11269786 Report

Quoted By:

>>11269615
Accept that you can make it look as perfect as possible to the eye but as soon as your take a photo you will notice every imperfection.

Anonymous

View Same Google ImgOps iqdb SauceNAO fagb_wip002.jpg, 342KiB, 1200x795

Anonymous Fri 20 Dec 2024 17:26:47 No.11269795 Report

Quoted By: >>11269806

>>11269785
>Personally I go File -> 1,000 (sometimes skip this if it's clean enough -> 2,000 -> 4,000 -> 6,000 -> 8,000 -> 10,000 but that's probably overkill (and I don't paint my models)
(optional) chisel -> 400grit (if priming)/800grit(if not priming) -> done.

Anonymous

View Same Google ImgOps iqdb SauceNAO HTB1XYLKBH5YBuNjSspoq6zeNFXau.png, 114KiB, 800x800

Anonymous Fri 20 Dec 2024 17:32:10 No.11269806 Report

Quoted By:

>>11269795
These are also awesome: https://www.aliexpress.com/item/32892739169.html (same as Wave polishing sticks but without paying for the brand) and you can even use the white side to polish clear parts.

Anonymous

Anonymous Fri 20 Dec 2024 21:02:56 No.11269995 Report

Quoted By: >>11270064

>>11269785
>6 separate steps
oh god please get a glass file and save yourself some time

Anonymous

Anonymous Fri 20 Dec 2024 21:53:04 No.11270043 Report

Quoted By:

>>11269785
holy fuck what a pain in the ass. cut off nub -> buff with fingernail -> done

Anonymous

Anonymous Fri 20 Dec 2024 22:17:05 No.11270064 Report

Quoted By: >>11270075

>>11269995
Why a glass file specifically

Anonymous

Anonymous Fri 20 Dec 2024 22:30:57 No.11270075 Report

Quoted By: >>11270114

>>11270064
specifically a nano glass file, not just any random nailfile
it's because they have very high grit, the equivalent of ~12k grit sandpaper. so you can file nubs away and leave an actual polished surface behind without needing to do multiple sanding steps. but they cut a lot faster than 10k+ grit paper so it won't take 10 years.

Anonymous

Anonymous Fri 20 Dec 2024 23:15:56 No.11270114 Report

Quoted By:

>>11270075
>leave an actual polished surface behind
Which may or may not be something you want if you plan to paint. Also, the rest of the kit plastic (aside from clear parts) is typically not *that* polished.

Anonymous

Anonymous Sat 21 Dec 2024 01:59:59 No.11270303 Report

Quoted By:

Huh. Dolores was a lot more difficult than Machinedramon and I made more errors like breaking a finger of her hand, stress marks, and scratches. I could pretend Bandai kits must be easier, but more likely just a skill issue. Feel fear to try painting her even though there are insets for where I need to apply colors to be more accurate. She's cute at least.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1734480181810131.webm, 3MiB, 1000x562

Anonymous Sat 21 Dec 2024 17:21:58 No.11270809 Report

Quoted By: >>11271664 >>11271676

Still waiting... for the rest of my squad

Anonymous

Anonymous Sun 22 Dec 2024 04:00:38 No.11271489 Report

Quoted By:

>>11269615
Don't waste time with low grit sandpaper. Low grit glass file around 400 to 600 will remove nubs far quicker wile leaving no to minimum scratch marks. If there are some scratch marks. Use sandpaper in grit 1000 and then 2000 then nail buffer will remove them easily. You will then have a surface that's almost identical to a non-sanded surface. This is probably the quickest way to get rid of nub marks. Don't waste time with 6 different sandpapers. It's a waste of time and the result ain't better.

Anonymous

Anonymous Sun 22 Dec 2024 10:34:01 No.11271664 Report

Quoted By: >>11271670

>>11270809
holy shit that's a big fish!

Anonymous

View Same Google ImgOps iqdb SauceNAO 1716035867444415.webm, 4MiB, 1152x1152

Anonymous Sun 22 Dec 2024 10:55:44 No.11271670 Report

Quoted By: >>11271676

>>11271664
Those scum keep sending scouting probes!

Anonymous

View Same Google ImgOps iqdb SauceNAO Accguy Supremacy.png, 937KiB, 1212x682

Anonymous Sun 22 Dec 2024 11:12:45 No.11271676 Report

Quoted By: >>11271764

>>11270809
>>11271670

Anonymous

View Same Google ImgOps iqdb SauceNAO P_20241222_215814~01.jpg, 320KiB, 1378x864

Anonymous Sun 22 Dec 2024 14:04:11 No.11271745 Report

Quoted By: >>11271951 >>11272516

>HGUC bolinoak sammahn

The lines are grammatical correct, it but they read awkward as fuck

Did they fire the guy who did the translation and used software translation? I do not recalle when they started having English in the manual it reads this bad.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1717319985983537.jpg, 699KiB, 1569x1378

Anonymous Sun 22 Dec 2024 14:36:12 No.11271764 Report

Quoted By: >>11274220

>>11271676
Oh shit, the Cyclops bois came through!

Anonymous

Anonymous Sun 22 Dec 2024 18:17:57 No.11271951 Report

Quoted By:

>>11271745
I use lens if I want to read moon runes.

Anonymous

View Same Google ImgOps iqdb SauceNAO 513I6HjPFvL._AC_UF894,1000_QL80_.jpg, 64KiB, 894x970

Anonymous Mon 23 Dec 2024 04:06:05 No.11272510 Report

Quoted By:

Has anybody painted up one of the One Piece Grand Ship Collection kits?

Anonymous

Anonymous Mon 23 Dec 2024 04:09:41 No.11272516 Report

Quoted By:

>>11271745
that doesn't read any more stilted than IRL descriptions of military vehicles to me

Anonymous

View Same Google ImgOps iqdb SauceNAO Screenshot_20241222_215101_Gallery.jpg, 513KiB, 1079x642

Anonymous Mon 23 Dec 2024 05:53:41 No.11272575 Report

Quoted By: >>11272657

Bought some Zoidpla after years of not modeling. I'm still as shit at it as I was back then. Got a Shield Liger and Liger Zero. How did I do choice wise?

Anonymous

View Same Google ImgOps iqdb SauceNAO Screenshot_20241222_223941_Gallery.jpg, 502KiB, 1080x883

Anonymous Mon 23 Dec 2024 06:40:02 No.11272601 Report

Quoted By:

Toesy woesys

Anonymous

Anonymous Mon 23 Dec 2024 08:22:25 No.11272657 Report

Quoted By: >>11272672 >>11272769

>>11272575
My first models were Zoids, actually. They had little wind up motors in them and it was kinda neat. I've thought about picking up some kits, but they have to be the right ones. I'm picky. Shield and Zero are some icons for sure, so that's a good choice. I wouldn't mind a Zero-Panzer kit, but I'm sure they're totally oop at this point.

Anonymous

View Same Google ImgOps iqdb SauceNAO Screenshot_20241223_010818_Gallery.jpg, 880KiB, 1080x1391

Anonymous Mon 23 Dec 2024 09:12:06 No.11272672 Report

Quoted By: >>11272719 >>11272769

>>11272657
Same here, first ever kit of any kind was an OG Liger Zero. The panzer could always get reissued, apparently the Liger Zero I got is a reissue.
Just doing some dots because that's all my skill allows for.

Anonymous

View Same Google ImgOps iqdb SauceNAO Dilanza_built.jpg, 2MiB, 3072x4080

Anonymous Mon 23 Dec 2024 10:21:09 No.11272697 Report

Quoted By: >>11272704

>>11269321
Built the thing and decided on the pose.
Gonna glue the joints and prime/start painting it on the weekend.

Anonymous

Anonymous Mon 23 Dec 2024 10:35:13 No.11272704 Report

Quoted By:

>>11272697
anon I want you to know you are the most based person in this thread right now

Anonymous

Anonymous Mon 23 Dec 2024 11:36:44 No.11272719 Report

Quoted By:

>>11272672
Yea, I was eyeing it. It's so nostalgic. I also want that metal Berserk Fury, but at the same time it's a smaller scale

Anonymous

Anonymous Mon 23 Dec 2024 13:19:14 No.11272769 Report

Quoted By: >>11272907

>>11272657
>>11272672
They reissue the kits as repackaging with different stickers and shit. Sometimes the pilot figures are different, reissues tend to have generic pilots instead of anime ones. I've been tracking the armours the past year to no success, so I'm hoping the coming year has some reissues since the Liger Zero kit got a reissue in the last two years.

Anonymous

View Same Google ImgOps iqdb SauceNAO KakaoTalk_20241011_123157695_01.jpg, 129KiB, 800x533

Anonymous Mon 23 Dec 2024 13:31:00 No.11272779 Report

Quoted By:

I was going to buy sazabi ver ka but found this bad boi for less than $70, it's the limited edition

Anonymous

Anonymous Mon 23 Dec 2024 13:37:55 No.11272787 Report

Quoted By:

>>11264448
do the pour type gundam markers also eat plastic?

Anonymous

Anonymous Mon 23 Dec 2024 13:49:29 No.11272800 Report

Quoted By:

Will MrColour be fine over Citadel primer? It's the only primer I have left over right now and I don't know if I can use lacquer paints on it.

Anonymous

View Same Google ImgOps iqdb SauceNAO Screenshot_20241223_083909_Gallery.jpg, 669KiB, 1080x849

Anonymous Mon 23 Dec 2024 16:45:10 No.11272907 Report

Quoted By:

>>11272769
Yeah, both are the reissue with extra marking decals. Never had luck with them so I won't use them sadly. I hope the ones you want get reissued Anon.
Just finished gluing everything down and it's as solid as a rock. Shield Liger is 10/10 in my eyes.

Anonymous

Anonymous Mon 23 Dec 2024 19:39:00 No.11273032 Report

Quoted By: >>11274011

when I do sanding with glass files, do I dunkt the whole thing in water, just put a few drops on it or wet the plastic instead?

Anonymous

Anonymous Tue 24 Dec 2024 09:34:56 No.11273611 Report

Quoted By:

>>11262604
That's thrift price? Lol

Anonymous

Anonymous Tue 24 Dec 2024 11:30:14 No.11273650 Report

Quoted By: >>11274011 >>11274025

Can I post non-gundam snap fitted chink model kits here? Also they're not even robots.

Anonymous

Anonymous Tue 24 Dec 2024 21:21:45 No.11274011 Report

Quoted By: >>11274024 >>11274025

>>11273032
you don't NEED to wet sand in the first place unless you're working with resin, but just wetting the file should be enough
>>11273650
>gunpla/PLAMO general
yeah
>not /m/
ouch. post them anyway but if someone runs you out of town there's always the threads in /toy/

Anonymous

Anonymous Tue 24 Dec 2024 21:30:23 No.11274024 Report

Quoted By: >>11274033

>>11274011
But this is the plamo threads on /toy/ and not /m/.

Anonymous

Anonymous Tue 24 Dec 2024 21:30:44 No.11274025 Report

Quoted By:

>>11273650
>>11274011
Personally I'm fine with anything being posted here. And it's not like anyone ever complains about the guy posting his ship railings or 3D printed Rei labia.

Anonymous

Anonymous Tue 24 Dec 2024 21:41:07 No.11274033 Report

Quoted By:

>>11274024
drank too much eggnog already clearly

Anonymous

View Same Google ImgOps iqdb SauceNAO plamo knights 1.jpg, 435KiB, 1090x742

Anonymous Tue 24 Dec 2024 22:48:24 No.11274106 Report

Quoted By: >>11274169

Guess I'll post them. I didn't really know where to post these right now, so I figured this was the best place currently on /toy/. I bought some of those cheap knight model kits off aliexpress. They're pretty fun and cheap enough to army build with, costing less than 4 dollars each.

Anonymous

View Same Google ImgOps iqdb SauceNAO plamo knights 2.jpg, 368KiB, 993x748

Anonymous Tue 24 Dec 2024 22:49:25 No.11274107 Report

Quoted By:

Posing them is super easy because they're mostly just on ball joints. They cannot put their arms down by their sides. They are only limited in the arms because there is no swivel anywhere. They can still pull off a lot of poses because the wrists are on ball joints.

Anonymous

View Same Google ImgOps iqdb SauceNAO plamo knights 3.jpg, 434KiB, 995x896

Anonymous Tue 24 Dec 2024 22:50:26 No.11274110 Report

Quoted By: >>11274125 >>11274168

I bought the other colors too. Comes in silver, black, white, and butter. For some strange reason, my black one was missing it's arms and legs. I still have like 12 more silver ones I need to build.

Anonymous

Anonymous Tue 24 Dec 2024 23:05:33 No.11274125 Report

Quoted By:

>>11274110
it's just a plastic shaving, nothing is missing

Anonymous

Anonymous Tue 24 Dec 2024 23:48:03 No.11274168 Report

Quoted By: >>11274175

>>11274110
The one with the guns goes kind of hard

Anonymous

Anonymous Tue 24 Dec 2024 23:49:18 No.11274169 Report

Quoted By: >>11274175

>>11274106
What scale (or rough size) are they?

Anonymous

View Same Google ImgOps iqdb SauceNAO file.png, 359KiB, 800x800

Anonymous Tue 24 Dec 2024 23:54:07 No.11274175 Report

Quoted By: >>11274185

>>11274168
Yeah they come with an assortment of random accessories, with a glock being one of them.
>>11274169
They're like about 5.5 inches, so 1/12.

Anonymous

Anonymous Tue 24 Dec 2024 23:59:02 No.11274185 Report

Quoted By:

>>11274175
Not bad. I expected smaller at that price

Anonymous

View Same Google ImgOps iqdb SauceNAO 20210526_164839 (2).jpg, 2MiB, 4032x2268

Anonymous Wed 25 Dec 2024 00:34:12 No.11274220 Report

Quoted By: >>11274271 >>11275979

>>11271764
run an air hose out of the claw or hinge the head so it'll be like one of those clam/treasure chest decorations

Anonymous

Anonymous Wed 25 Dec 2024 01:32:46 No.11274271 Report

Quoted By: >>11274319 >>11275668

>>11274220
Those are hg right?

Anonymous

Anonymous Wed 25 Dec 2024 02:54:09 No.11274319 Report

Quoted By: >>11275668

>>11274271
yes, i dont think there are any other versions of the hygogg

Anonymous

View Same Google ImgOps iqdb SauceNAO 20241224_221207~2.jpg, 628KiB, 1789x1836

Anonymous Wed 25 Dec 2024 03:13:39 No.11274326 Report

Quoted By: >>11274701

No new gunpla, but Santa has gifted me my first foray into panels. I'm nervous, actually.

Anonymous

View Same Google ImgOps iqdb SauceNAO PXL_20241225_055040187.jpg, 793KiB, 2560x1920

Anonymous Wed 25 Dec 2024 06:01:53 No.11274430 Report

Quoted By:

About to start a PG after this RG.
How much longer am I in for? Would like to do just OOB and maybe leds. I'm usually a mg, top coat and paint missing details kind of guy.

Anonymous

Anonymous Wed 25 Dec 2024 14:44:55 No.11274701 Report

Quoted By:

>>11274326
>use before assembling
huh I always use them after assembly

Anonymous

View Same Google ImgOps iqdb SauceNAO Graze WIP.png, 308KiB, 441x614

Anonymous Wed 25 Dec 2024 16:19:46 No.11274823 Report

Quoted By: >>11275245

Are there any sites or shops that you can commission to create custom decals? Working on my group build entry and I really want to give it a unique OC donut steel ace pilot emblem. I bought blank decal paper to potentially create my own, but of course my fucking printer breaks just when I have the motivation to use it.

Anonymous

Anonymous Wed 25 Dec 2024 20:39:00 No.11275065 Report

Quoted By:

Got the MG westenfluss for Xmas and he is gorgeous.

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_20241226_000948254_HDR~2.jpg, 2MiB, 4080x2631

Anonymous Thu 26 Dec 2024 00:10:47 No.11275214 Report

Quoted By:

Well, I now have the trio.
Once I get back home I'll put this lady together.

Anonymous

Anonymous Thu 26 Dec 2024 00:58:29 No.11275245 Report

Quoted By: >>11275446 >>11275668

>>11274823
Do you not have a convenience store nearby?

Anonymous

Anonymous Thu 26 Dec 2024 06:12:10 No.11275446 Report

Quoted By: >>11275458 >>11275668

>>11275245
...what kind of convenience stores you got that will print decals for you?

Anonymous

Anonymous Thu 26 Dec 2024 06:31:58 No.11275458 Report

Quoted By: >>11275508

>>11275446
You can print black decals using transparent waterslide decal paper with consumer grade printers, which are probably available at your nearest convenience store.

Anonymous

Anonymous Thu 26 Dec 2024 08:42:22 No.11275508 Report

Quoted By: >>11275515

>>11275458
Are you in Asia or somewhere like that, with actual good convenience stores? 7-11s in America ain't got that shit.

Anonymous

Anonymous Thu 26 Dec 2024 08:50:04 No.11275515 Report

Quoted By: >>11275542

>>11275508
Damn okay, I thought they would at least offer normal text document printing services.

Anonymous

Anonymous Thu 26 Dec 2024 09:52:29 No.11275542 Report

Quoted By: >>11275543

>>11275515
there are separate print shops like fedex/kinkos which offer print on demand services
also printers in public libraries, but i doubt they'd have decal paper

Anonymous

Anonymous Thu 26 Dec 2024 09:53:45 No.11275543 Report

Quoted By: >>11275647

>>11275542
You can just bring your own paper?

Anonymous

Anonymous Thu 26 Dec 2024 13:24:28 No.11275647 Report

Quoted By: >>11276044

>>11275543
I've had to print stuff from a nearby store once, Walgreens I think, and they wouldn't let me bring my own paper for whatever reason. They could only print with their own paper, which of course wasn't the kind of paper I needed at the time.
Guess your country is just nicer than mine.

Anonymous

View Same Google ImgOps iqdb SauceNAO 4580236846987-1__28814.1521166706.jpg, 194KiB, 1103x1280

Anonymous Thu 26 Dec 2024 13:45:24 No.11275668 Report

Quoted By:

>>11274271
>>11274319
yeah, painted in highest quality apple barrel craft paint
>>11275245
>>11275446
still need to build my 1:150 convenience store

Anonymous

Anonymous Thu 26 Dec 2024 13:53:17 No.11275674 Report

Quoted By:

I will build my first gundam in months today.

Anonymous

Anonymous Thu 26 Dec 2024 14:46:51 No.11275722 Report

Quoted By:

Way back in 2018 I bought an HG Astray Blue, an RG Astray Red, and an HG Astray... Gold? I forget the name. The black and gold shiny one with the wings, it uses parts from the Blitz Gundam I think.

Also got some of the gundam markers - panel liner and the basic colored set.

Wanted to paint the Astray Blue but never got around to it.

I'm not touching those old kits again because honestly they're fucked from being moved several times.

After painfully searching for an e-shop that doesn't have buttfuck insane prices and shipping rates, I bought several 30 Minute Missions sets and got a free HG RGM-79G GM COMMAND as a bonus.

Still need to get paints and shit.

Anonymous

Anonymous Thu 26 Dec 2024 15:25:16 No.11275747 Report

Quoted By:

How long do you think before the McDonald's repaint Eva kit drops?

Anonymous

View Same Google ImgOps iqdb SauceNAO 20241225_225642.jpg, 2MiB, 1804x3908

Anonymous Thu 26 Dec 2024 19:28:56 No.11275938 Report

Quoted By: >>11276046

I am having a good time.

Anonymous

Anonymous Thu 26 Dec 2024 20:24:05 No.11275979 Report

Quoted By:

>>11274220
Totally jealous of that sweet city.

Anonymous

Anonymous Thu 26 Dec 2024 21:32:42 No.11276044 Report

Quoted By:

>>11275647
Try looking for a stationary shop of some kind. They're usually more lenient.

Anonymous

Anonymous Thu 26 Dec 2024 21:34:56 No.11276046 Report

Quoted By:

>>11275938
That's a big lad.
I want to buy the Mega RX-0 but I don't have enough room for something like that.

Anonymous

View Same Google ImgOps iqdb SauceNAO f91.jpg, 409KiB, 1629x951

Anonymous Thu 26 Dec 2024 22:30:31 No.11276080 Report

Quoted By: >>11276084 >>11276090 >>11276216 >>11276237 >>11276295

So i've build the HG Gundam F91 and it wasn't that good.
>Scammed
-The images on the carton and even inside the instruction show things that are not in the box. The sort wing tips that come out of the shoulders are supposed to have a white rim but there is not plastic nor stickers for that in the box.
-Same thing with the "shield holder" which is supposed to be black and yellow all around but again neither plastic nor stickers for it. Same with the yellow on the chest.
>things that just where shitty
-I lost one shoulder wing part and can't find it. I swept my entire room but it's not there.
-Used the blue gundam marker (GM 06) for the underslung guns, doesn't look that good and is very dirty working
-The chest part, looks kinda empty
-the shield-arm connector is the worst of all gundams I build yet. Everything is very loose and the clear effect is constantly at risk to fall off.
-I cut off the part of the beams that connects to the handles.
>good things
-No stress marks thanks to the glass files
-Shoulder stickers were very easy to put on
- I like his rifle

Anonymous

Anonymous Thu 26 Dec 2024 22:36:39 No.11276084 Report

Quoted By:

>>11276080
You must be new.

Anonymous

Anonymous Thu 26 Dec 2024 22:52:10 No.11276090 Report

Quoted By:

>>11276080
Pretty sure in the box and manuals they say that some parts are painted and losing that wing part is just on you.

Anonymous

View Same Google ImgOps iqdb SauceNAO 20241226_125033.jpg, 4MiB, 4000x3000

Anonymous Thu 26 Dec 2024 22:52:53 No.11276091 Report

Quoted By: >>11276112 >>11276441

I've never built a Gunpla before but mentioned an interest in it to my gf
She bought me this perfect grade and I'm a bit intimidated by it
How tough will this be, realistically?

Anonymous

Anonymous Thu 26 Dec 2024 23:19:39 No.11276112 Report

Quoted By: >>11276122

>>11276091
Already mentioned this in the /m/ thread, but to give some more helpful info:

For a Gunpla, clean nub removal is of paramount importance. Usually it's case of getting clean cut and then using high grit sandpaper (or a glass file if you want to be fancy) to smooth down the surface. A HG kit is good practice for this. Following the instructions is very simple, literally lego-simple. Practice on a RG or MG will also help you get used to the assembly process, but those tend to be more expensive (at least outside of Hobby Lobby).

Don't worry too much about painting yet. PG kits are generally designed in such a way that you don't need paint or stickers, they look "perfect" right out of the box. Especially for the Unicorn kits, they have so many moving parts that paint may well be a hindrance more than a help. Everyone always harps on people for not painting their kits, but for an absolute beginner it's more important to nail down the assembly process first. Besides, you can always disassemble your completed kits to paint them in the future.

One more tip: Look into peg and hole cutting. That makes taking the kit apart significantly easier, which can be a life-saver if you accidentally make a mistake. A set of guitar picks also really helps, try to get a pack of the thinnest ones available, they can pry apart pieces without damaging them like if you use a metal tool.

Anonymous

Anonymous Thu 26 Dec 2024 23:27:36 No.11276122 Report

Quoted By:

>>11276112
Damn, very appreciated tips anon. Saving this post for future reference - will definitely go to my local comic shop to check out what HGs or RGs they have (I recall seeing a decent selection last time I was there and I'm not too strapped for cash)
Cheers

Anonymous

View Same Google ImgOps iqdb SauceNAO scratchers.jpg, 825KiB, 1600x1091

Anonymous Fri 27 Dec 2024 00:40:49 No.11276199 Report

Quoted By: >>11276444

The best thing about the next day after Christmas? Christmas-themed cat scratchers on sale.

Anonymous

Anonymous Fri 27 Dec 2024 00:57:29 No.11276216 Report

Quoted By: >>11276332

>>11276080
I haven't built this yet but I have heard good things about this kit generally. Most of the shitty things that you listed seem like user error on your part. And HGs are cheap kits, they are frequently not 100% color accurate even with stickers. You are supposed to either paint, or buy a more expensive kit with better color accuracy.

What you are doing here is akin to buying a Big Mac and complaining that the beef isn't wagyu.

Anonymous

Anonymous Fri 27 Dec 2024 01:10:19 No.11276237 Report

Quoted By:

>>11276080
>colour accuracy
skill issue (paint it)
>lost a part
skill issue (hamhands)
>loose joints
skill issue (tighten them)

Anonymous

Anonymous Fri 27 Dec 2024 02:08:59 No.11276295 Report

Quoted By: >>11276315

>>11276080
I understand your frustrations. Many of the Master Grade kits from before 2014 aren't worth the cardboard they come in. Me being a big 90s Gundam fan means settling for HG remakes or slumming some pretty poor designs. The kits from 2010 and earlier are of such poor quality that you should stay away from them.

Anonymous

View Same Google ImgOps iqdb SauceNAO hguc-geara-doga-v0-5lip3n394vpa1.jpg, 916KiB, 3000x4000

Anonymous Fri 27 Dec 2024 02:22:47 No.11276315 Report

Quoted By:

>>11276295
Truly early line HGUCs (talking 2000-2005) can be rough, but 2010 is around when HGUC was at its peak for me. The engineering was just good enough, and the kits from that time have this incredibly solid and satisfying feeling. So many strong contenders from that era, Zaku F2 (perhaps one of my favorite HGs of all time), Jegan/Stark Jegan, Kampfer, Rick Dom II, Gouf Custom, GM Custom, Geara Doga, Zaku 1 Sniper, Jesta, Kshatriya...these kits felt so weighty and stable and good. HGUCs these days are way more advanced, but mostly feel thin and flimsy to me. Some of them literally get knocked over by the wind generated if I open my door too fast.

Anonymous

Anonymous Fri 27 Dec 2024 02:36:16 No.11276332 Report

Quoted By: >>11276412

>>11276216
>food analogy

Anonymous

Anonymous Fri 27 Dec 2024 03:52:35 No.11276412 Report

Quoted By:

>>11276332
Everybody eats food, so analogies related to food are simple yet simultaneously effective.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1713588263757170.jpg, 91KiB, 991x600

Anonymous Fri 27 Dec 2024 04:40:52 No.11276441 Report

Quoted By:

>>11276091
a PG is not any more technically difficult than an MG or HG model kit, it just has far more parts to arrange.
the only NEW technique/skill you need that isn't used in say snapping together a $12 hg gundam aerial is applying water decals.
although yeah getting a feel for nub removal and whatnot with a cheaper, lower-partcount kit first will help avoid messing anything up

Anonymous

Anonymous Fri 27 Dec 2024 04:41:53 No.11276444 Report

Quoted By:

>>11276199
i just stole a big block of styrofoam packing material from a family member's gift

Anonymous

Anonymous Fri 27 Dec 2024 05:13:00 No.11276459 Report

Quoted By: >>11276471

I picked up a Gundam G Frame on clearance, I like it but only for the articulated figure underneath the armor. Do all Gundams have a figure underneath that can be posed without armor?

Anonymous

View Same Google ImgOps iqdb SauceNAO 1705238826579746.jpg, 172KiB, 640x853

Anonymous Fri 27 Dec 2024 05:25:31 No.11276471 Report

Quoted By:

>>11276459
>Do all Gundams have a figure underneath that can be posed without armor?
the most common kits, "High Grade", do not.
Master Grade, Real Grade, and Perfect Grade all ahve inner frames. But you've gotta build them yourself.

Capcode	All Only User Posts Only Verified Posts Only Moderator Posts Only Manager Posts Only Admin Posts Only Developer Posts Only Founder Posts
Show Posts	All Only With Images Only Without Images Only Spoiler Images Only Non-Spoiler Images
Deleted Posts	All Only Deleted Posts Only Non-Deleted Posts
Ghost Posts	All Only Ghost Posts Only Non-Ghost Posts
Post Type	All Only Sticky Threads Only Opening Posts Only Reply Posts
Results	All Grouped By Threads
Order	Latest Posts First Oldest Posts First

On these archives

Your latest searches

Welcome to the Gunpla/Plamo Generalno