>Should be out now: Otomo Airou (Monster Hunter)
>MAY Melynx (Monster Hunter)
Otomo Felyne (Monster Hunter)
Go-Shogun
Go-Shogun (Special)
>JUNE Dark Magician (Movie: Dark Side of Dimensions)
Yugi Muto (Movie: Dark Side of Dimensions)
Sakamoto (Haven't you heard? I'm Sakamoto)
>JULY Seto Kaiba (Movie: Dark Side of Dimensions)
Blue Eyes Alternate White Dragon (Movie: Dark Side of Dimensions)
>TBA Kaiser X Equipment (Male Swordsman)
Dino Equipment
Kirin Equipment (Female Swordsman)
Bonda Natsunosuke (Gurazeni)
Hyakuya Yuuichiro (Seraph of the End)
Hyakuya Mikaela (Seraph of the End)
Diane (Seaven Deadly Sins)
Beat (Jet Set Radio) - 2016
Baikanfu (Machine Robo: Revenge of Chronos)
Iron Man Mark XLV (Age of Ultron)
Arthur (Ghosts 'n' Goblins) - 2016
66' Batmobile with Batman & Robin
Gamera 1967 (Gamera vs Gyaos)
Gyaos 1967 (Gamera vs Gyaos)
G1 Gamera (Gamera: Guardian of the Universe)
Gyaos (Gamera: Guardian of the Universe)
G2 Gamera (Gamera 2: Attack of Legion)
Legion (Gamera 2: Attack of Legion)
G3 Gamera (Gamera 3: The Revenge of Iris
>Assemble Borg Jarkroid - Volga / Walze
3-in-1 Bike
Old Thread:
>>5639496
Anonymous
>>5667899 Should come with a box for the accessories.
Anonymous
>>5668543 Vulcanlog Sigui 2.0 when??
Vulvanlog Queen's Blade girls when?
Anonymous
Quoted By:
>>5668562 >Vulvanlog Queen's Blade I see what you did there.
And no one knows, if ever. Only way to get one is probably to start some sort of online rabble rousing to get the companies attention and show them theres a market for more Legacy's.
I'd love a Legacy of all the missing QB figures, especially the book pack in ones, as well as shit like the Elric brothers from FMA, the box set Raoh from FotNS, and more.
Anonymous
Quoted By:
>>5668562 >Vulvanlog Man, my sides!
Anonymous
>>5668551 not all revos come with boxes, none of the star wars ones do, I don't think any of the sci-fi ones do either.
Anonymous
Quoted By:
>>5668583 Really? Thats kind of bullshit. Never knew that.
Anonymous
Does mandarake no longer let you put things from different stores into the same order? I want to pick up three or four cheaper revols, but I'm not seeing a way to do it.
Anonymous
>>5668543 I must have missed something, why are revos called vulcanlog now?
Anonymous
>>5668543 where's the musha? (the samurai skeleton)
it should be out in june, it's on preorder on sites, and you don't even mention it in the list?
Anonymous
Quoted By:
>>5668731 Sorry Anon, I just copied the last OP's list, I'm not the list maker.
>>5668684 I don't know, to be honest.
Figmoe Lurker
>>5668684 >why are revos called vulcanlog now? IIRC, Union Creative is now making figures in association with Kaiyodo, so they call them Vulcanlogs
>>5668562 >Vulvanlog Queen's Blade Top Kek
I hope that the get more of the QB girls in the future, there were many characters that haven got a figure at the first place
Anonymous
Quoted By:
>>5668669 You cannot combine orders from different stores. It sucks, but it makes sense.
Anonymous
Quoted By:
Lets see some revo pics, guys. I'm bored, and I know you got some imagination.
Anonymous
Technically they can be together thanks to endless promos by Capcom.
Anonymous
>>5669009 >that one Monster Hunter mission in Peace Walker Anonymous
Anybody know where I can buy a non bootleg stormtrooper without it being expensive as fuck
Anonymous
>>5669023 And the Big Boss armor in P3rd
Anonymous
Quoted By:
>>5669009 >Blue Rath too Nice man.
And I wish the camp set came with a hunter and not the cat.
Anonymous
Anonymous
Anonymous
>>5669027 wait, MGS5 took place in Australia?
Anonymous
I promised myself I'd get SAS Robin, Revoltech Kinnikuman, and Figuarts Terryman. I figure it'll give me three actually different figures with different body types, instead of the same frame but different faces, if I'd gone all from one line.
Anonymous
>>5669172 So how's Kinnikuman? Worth picking up?
Anonymous
>>5669181 I really like him! He definitely has that revoltech dynamism, looks alive and powerful in every pose. And he can get into just about any wrestlin' pose you want.
My only complaint would be that because of how his arms are built, doing the classic strongman pose looks weird, because the inside of his arms/armpits are scooped out. But 70% of the time I just have him suplexing various other figures, and he looks great doing that.
Anonymous
Quoted By:
>>5669189 Sounds fun, might pick him up some time just to fuck with. Or the mini.
Anonymous
Anyone know some good accessories/dioramas/etc. to fit with revo's? Looking mainly for some food items (beer, wine, etc) and resturant/school type stuff like desks/chairs.
Anonymous
Anonymous
Quoted By:
>>5668543 They never look good side on
Anonymous
We need more artbooks with Figures
Anonymous
Quoted By:
>>5669153 Nah, that's where MGS6 will be.
Anonymous
>>5670937 plz no
That set shit is why Aldora/Branwen/Annelotte are so expensive.
Anonymous
Quoted By:
>>5670947 The Aldra I bought was literally only 6k. That's cheaper than most new figmas
Anonymous
May 15, 2006...three action figures were released as a the prelude of an ambitious collector-aimed series.
Anonymous
Quoted By:
>>5671161 My first Revoltechs were VF-1S, Getter 1, Black Getter, Shin Getter all bought together.
Anonymous
Quoted By:
>>5671161 They were better than MS in Action at 1900 yen with full accessories and visually unobtrusive joints, therefore looking like a statue while being articulated.
Anonymous
Quoted By:
>>5671161 The ZOE revo's, which I got a few months back were my first. Loved the series.
Anonymous
Quoted By:
>>5671161 White Raiden roughly after his release.
Anonymous
Quoted By:
>>5670586 Michael's has some small accessories and food items that would work, but I've never found any furniture there.
Anonymous
>>5671161 My first was Vash, got him in early 2011. My first figure, actually. (assuming toys you got as a kid don't count)
Also, please please fucking re-release Dante with modern articulation and size.
Anonymous
Quoted By:
>>5671717 Capcom just released a NEW DMC...Pachinko machine.
Chances are Dante ain't showing up.
Anonymous
>Legacy of revoltech
Anonymous
Quoted By:
>>5672534 Same reason why a bunch of the QB stuff isn't despite needing it pretty badly.
Because Japan remakes shit whenever it wants, or never.
Anonymous
>>5670729 >dat Raiden in the back >>5671161 OG Raiden a year or so after release, then the Eva Series re-release with wing and weapons. Those are my only ones so far, I need to fix that.
The newest Iron Man is really tempting, I'd even say it looks better than the SHF (not the same armor I knoe) too bad about the higher price, being poorfag blows.
Anonymous
Quoted By:
>>5673085 >dat Raiden in the back I try to make my dumb pics fun. Dunno if I succeed very often, but it's the intent.
Anonymous
Also, if it might help anyone, the Vulcanlog Sneaking Suit Venom Snake (ie: the regular size one, not a mini) has been dropping in price on Amazon. It's currently around $56. Decided to pick one up, since thats the lowest I've seen it for and it's probably the best Big Boss figure I'll find.
Anonymous
Quoted By:
>>5671161 Gurren Lagann and Enki Revoltech in early 2011. That was the beginning of the end of the slippery slope which kicked off my figure collection.
Anonymous
Anonymous
>>5673085 I need more male figures. Working on remedying that.
Anonymous
Quoted By:
>>5673526 Boredom rules the roost today.
Anonymous
Got in Revolmini Iron man after a recommendation and he's surprisingly fun but the lack of any hand repulsors is a little disappointing. Not unless I can use other effect parts and some blue tack.
Anonymous
>>5673727 The right arm's peg hole is a bit larger than the joint so it's pretty loose but I'll see if the hot or warm water trick would let me remold it a little.
Anonymous
Quoted By:
>>5673734 And a little fun with Venom Snake's arm swap.
Anonymous
>>5673727 >>5673734 >Ninja Lucky. I want him but I never see him below like $80 fukken dorrahs for a mini.
Whats that blood spurt from though?
Anonymous
Quoted By:
>>5673743 >Whats that blood spurt from though? It comes with Figma Satzbatz Knight
Anonymous
Anyone have the pic of the headswap between these two?
Anonymous
My revoltech Woody has a shoulder joint that just won't budge no matter what I try, what should I do?
Anonymous
>>5674351 If possible, try hot water or boiling water for a minute or so. I *think* that might loosen the joint.
Anonymous
>>5674399 Could that mess up the rest of the figure?
Anonymous
>>5674406 Dunno. Never tried it myself, but other Anon's have suggested it to others before. I'd say wait until someone who knows can answer, or Google it.
Anonymous
>>5674414 I'm thinking it might melt
Anonymous
Sup, i posted on the last threas about Boba Fett... How does that "base" of his works? Anybody got pics? Thanks!
Anonymous
>>5674430 How thick is the joint exactly? I don't have Woody but I softened joints in warm water for a little bit so it's pliable enough to allow movement and not feel so stiff. Nothing bad happened to the joint afterward. Just don't exert too much force trying to move it or you'll just mess it up.
Anonymous
Quoted By:
>>5674441 It's not very thick and I can't even separate it from the figure, I really don't want to do something that might risk damaging everything.
Anonymous
Quoted By:
>>5674438 It's essentially a third leg that plugs into the bottom of his jet pack for stability
Anonymous
Quoted By:
>>5674351 Hot air from hair dryer, or hot water (50℃) will soften the PVC around the joint so should loosen enough to get the joint rotating.
Anonymous
Why is it Japanese toys are so scattershot?>Snake, but only a mini >Big Boss, but only the PW version, no Volgin or anything >Venom, but no Quiet or Skull Unit >Raiden, but no Jetstream Sam or Senator >Yugi & Kaiba, but movie versions with movie version monsters >Some shit gets Legacys, while other shit that would probably still sell if scalper prices are any indication, doesn't
Figmoe Lurker
>>5674238 >from futaba Tbqh, this headsawp looks terrible
Anonymous
Quoted By:
>>5675282 Maybe the companies that the character originates from can dictate who gets what? I'm brothered vastly by the fact Raiden was such a great articulated figure and Gray Fox would've made a solid follow-up for the scale given but we got a mini.
Anonymous
Quoted By:
>>5675326 >tiny as fuck head on thick ass neck Wow, that looks bad. MGS5 Snake on PW body isn't that bad, but damn.
Anonymous
>>5675282 They just can't take risks when the price per figure is getting higher and higher.
Although what they think might sell is, well, unique (Buddha, horse, JSDF prototype fighter, research submarine, giant soft vinyl statues...) but I guess they are targeting a different group than other companies.
MGS stuff, I still think video game characters are not well known to enough people to get sub-characters made. MH is the big exception since the game is super popular in Japan.
Union Creative is more focused on current IPs so they did movie versions. And I believe Legacy was a limited time thing before they used up the factory line for VulcanLog.
It used to be ''make everyone for popular series'' for big companies like Bandai with Souchaku Henshin and MSIA, but now especially for smaller companies they need to cherry pick main characters that will sell. Fuck how many figma Sabers were there before Archer? SHF Kamen Riders still have a good completion percentage over the years. SAS JoJo stuff is like the exception.
Anonymous
>>5675326 Thanks, guess I won't be doing that, looks a lot worse than I thought it would. Otherwise, is PW Snake a good figure? Might still pick him up if so.
Anonymous
>>5675594 He's pretty good if you like his face sculpt. It's not for everyone, because it's based off the art. His articulation is pretty much what you expect from revo stuff.
Anonymous
Quoted By:
>>5675609 The face isn't a huge issue, I'd probably try and touch it up myself anyway. My biggest issue is those shoulders, it's just very distracting. Has anyone tried replacing then with smaller or double-ended ones?
Anonymous
>>5675397 You're also thinking of Kaiyodo in particular. They've always been adventurous with their picks of IP... even before they started Revoltech. I think Takeya revoltechs and those US movie replica ones are meant to appeal to different collectors. It works, I quit revoltech because I wanted to focus back on completing my Takeya SIC collection, then when the announced the Takeya revoltechs... I was like fuck me, I guess I'm back on revoltechs.
I enjoy it but honestly am pissed that Solid Snake and Gray Fox are a fucking mini, after seeing just how well done Raiden is.
Anonymous
Quoted By:
Phoenix Wright figma announced.
Anonymous
I'm thinking of getting a Revo Iron man. Is the Mark 2 any good? I prefer the Silver look over Red/Gold
Anonymous
http://www.amiami.com/top/detail/detail?gcode=FIGURE-019305&page=top Vulcanlog 005EX MonHunRevo Otomo Felyne (Brave Neko Series) Miyazwa Models Limited Distribution Edition
>>Vulcanlog 005EX MonHunRevo Otomo Felyne (Brave Neko Series) Miyazwa Models Limited Distribution Edition what does thsi mean?
Anonymous
>>5676598 As bizarre as it is, it's just some odd variant release with just this being the major change.
Anonymous
>>5676605 >rare meat Ha ha what? Why? Just...Why. They could pack that in with ANY of the other upcoming figures, why do an "EX" of the Palico and only change the meat?
Anonymous
Anonymous
Quoted By:
>>5676605 so felynx has gold pick axe?
that's it??
Anonymous
>>5676614 Yeah but they could've changed the color of the cat/armor too. Palico's come in lots of colors and so does their armor. It's a really halfhearted change to just recolor the meat.
Anonymous
>>5676622 this would have been fantastic
Anonymous
>>5676640 I know, right? Usually other EX figures get a big color swap, like white Raiden variant like the armor option from the games, all the 2P Queens Blade colors, etc.
Theres tons of Palico color options in the latest MH games, they could've done a full fur repaint at least for brown/black/striped/etc whatever. And with Japan's love of cats, surprised they didn't.
Anonymous
Quoted By:
>>5676622 >>5676649 i would have POed so hard if it's a ornage or grey tabby
Anonymous
>>5675326 Any chance of a pic with the revo GZ Snake head on Venom?
Anonymous
Quoted By:
>>5676672 ...why? it will be virtually the same except for the style of hair.
Anonymous
>>5676589 Good sculpt, but chance of the paint being fucked up somewhere. More noticeable since he's all silver.
Anonymous
>>5677038 How many Iron Man figures are there? Does every company just spew out like 30 of the things?
Anonymous
>>5677667 Japan loves dudes who fights in mechanical suits, especially when they are red.
Anonymous
>>5677717 Ok, true. But I thought Japan hated filthy baka gaijin creations?
Anonymous
I bought the Jehuty & Vector Cannon off AmiAmi, but when it arrived, I noticed the cockpit's hinge was broken. Does anyone know how to contact Kaiyodo for a replacement?
Anonymous
Anonymous
>>5677884 He's an older figure at this point, could he even get a replacement part like that?
Anonymous
Is 40 dollars a good price for Alleyne's revo?
Anonymous
>>5677888 Shit, I didn't even think of that... But it couldn't hurt to try, right?
Anonymous
>>5677904 Is it the Legacy? You can find the Legacy on Amazon for $38 to 40 IIRC. Dunno about anywhere else.
$35-40 for her sounds about right to me as long as it's the Legacy.
Anonymous
Quoted By:
>>5677909 Can't hurt to try asking, no. I don't know how to contact them though, or if they can even read english to answer properly.
Anonymous
>>5677910 The Legacy is the one with the smaller box, right?
Anonymous
>>5677920 Smaller yellow box and better new-style joints. Which is important. Because the whole point of Legacy's were to give the newer, good joints to figures with the older, shittier ones. Revo joints had a huge shift in quality at some point, going from pure ass to amazingly solid, so the Legacy lines purpose was to re-release some older figures with their newer joints.
Anonymous
>>5677924 Bummer. It wasn't the Legacy.
Anonymous
>>5677929 I'd avoid it then, I have a few pre-new joints figures and I can definitely see why people used to say revo's were shit. Go for Legacy until you feel comfortable with possibly getting a figure with bum joints.
Anonymous
Quoted By:
>>5677963 For the QB line I meant. Since a lot of lines came after the joint change, but QB came during the joint change, so some of the QB revo's have solid joints, and some have the shit older ones.
I know for example, Sigui and Alice Boost have the new joints because they were made after the joint change, but non-Legacy Alleyene would have the old, bad joints.
Anonymous
>>5677963 I remember only handling the Overking revo and being completely puzzled by the joints.
Anonymous
Quoted By:
>>5677979 Revo's are simple. You turn the joint, then you turn the limb. Or you just yank the limb off, then turn the joint, then stick it back on. Theres some you can't just tear apart, but those are the exception and not the rule normally.
Anonymous
Quoted By:
>>5677721 ? No. In fact they have white people envy so likes their stuff too.
Anonymous
>>5677929 Alleyene had some re-issues before Legacy so might have better joints. I think 2P has better joints for sure.
Anonymous
>>5677963 >see why people used to say revo's were shit. The crappy 6mm joints were used for some period, but not that long, just some revo that came out during that time that were heavy with them really suffered. Like QB and transforming VF-1.
People had other reasons for calling them shit (not properties they want, paint, sculpt, ratchets, and Yamaguchi)
Anonymous
>>5678280 >ratchet joints >shit Are people just retarded or something? Ratchet joints are probably the best thing you can have in any toy.
Anonymous
Quoted By:
anybody got a video or user made photos of the melynx? im kind of pleased with the felyne and i think he could do with a friend!
Anonymous
Quoted By:
>>5678286 Kind of. The point was they can't get the pose they want because of the fixed angles of the ratchets.
Which you can do finer adjustments by rotating the pegs, that's why the joints are spherical...
Not as retarded as saying they pose too dynamically and it's shit because they don't in source material.
Anonymous
Quoted By:
>>5678286 The general argument I see is related to the fact people don't like how Revoltech's have a weird thing for dynamic only posing and have hips thrusting out in some more vanilla poses. Next to stuff like Revos having pieces falling off easily. The last bad posing thread discussion seems to draw the ire for Revoltechs out of people.
Anonymous
>>5678269 I'm not sure if I should ask the seller or not.
It's the 1P version, which I like more, but there's the issue with the joints.
Anonymous
>>5677038 >all silver >paint being fucked up how so?
>>5678286 The old ratchet joints got floppier than an old man's schlong after a while
Anonymous
Quoted By:
>>5678335 Maybe just ask if it was first production or not? Not that there was any visual difference on them have to rely on the seller's memory.
Anonymous
Quoted By:
>>5678348 Since it's all one tone silver, any smudges or scratches sticks out. I got one with a darker tone splash on the face. It's just a chance you need to take buying that one online.
Anonymous
Quoted By:
>>5673085 >(not the same armor I knoe) But that's wrong. SHF did the 45 as well.
Anonymous
>>5673170 >implying Venom isn't also Big Boss >didn't play the game >or worse, didn't take its message seriously I'm sorry.
Anonymous
>>5679764 Venom isn't BB in 5 though, different person. He is BB in GZ though
Also I don't care about the message. It's not the first time Kojima's done this, see: Raiden.
Anonymous
>>5679768 >Venom isn't BB in 5 though, different person https://m.youtube.com/watch?v=b8xAKEZukGw >From here on out, you're Big Boss. Come on, man. Don't call Jack a liar.
Anonymous
Quoted By:
>>5680538 Still a different person, the whole ending was a rush job because Konami was fed up with how long the game was taking to come out and how much money Kojima was spending. But it doesn't matter anyway because as of GZ thats what BB's face now looks like.
Anonymous
Quoted By:
>>5671161 Yotsuba&! Summer version.
Anonymous
>>5668543 Is there a checklist of every revo, like the one Figma General has?
Anonymous
Anonymous
>>5680641 No idea Anon, someone here might know.
Anonymous
Anonymous
>>5671161 >When did you get your first Revoltech? If I remember right, it was Raiden and Alucard at AmiAmi in 2013 or 2014.
Anonymous
>>5680931 Did they ever explain why the fuck the revo Alucard is all black?
Anonymous
>>5681291 I have no idea. I've seen some people try and say that it's based on the manga but even that seems really flimsy.
Anonymous
Quoted By:
>>5681381 I own the whole manga. He changes his look a lot, but he usually has his trademark red coat from what I remember.
Anonymous
Quoted By:
Got in my payment request for Melynx.
Anonymous
Anonymous
Anonymous
>>5681735 >>5681737 why didn't they make a blue eyes that fit in the scale with the Monster Hunter Dragons?????
Anonymous
Quoted By:
>>5676589 Wait for the now-confirmed SHFs.
Anonymous
>>5681735 >>5681737 Ok, that's definitely too small. Guess blue eyes is sadly a pass from me.
Anonymous
>>5681900 Blue Eyes varies in size throughout the manga, but he's usually seen as large enough to hover around Kaibas shoulders. I think pic related is the smallest he's ever been shown. I think revo is going for a jojo stand like interpretation of him to match Yugi and DM.
Anonymous
Quoted By:
>>5681762 I guess so they fit together as a manageable display with each other and not taking up too much room. Bit stupid Blue Eyes has to be smaller because of that.
Anonymous
>>5681735 >>5681737 Why the hell did they not articulate his jacket?
Anonymous
>>5682352 But Blue Eyes is going to be tiny next to Dark Magician.
Anonymous
>>5682376 Maybe, or maybe DM looks tall next to Yugi since Yugi is supposed to be pretty short. Kaiba is much taller compared to Yugi and probably makes BEWD look small in comparison.
Anonymous
Quoted By:
>>5683001 Doesn't change the fact. And based on the given heights DM is taller than Kaiba though that includes his hat.
Anonymous
>want to buy QB figures because they're sexy anime lady toys that also have cool weapons and are poseable >feel like a fucking loser every time I'm about to pull the trigger on any of them >missed out on them for years now
Anonymous
I love Revoltech, but WHY do they cost 50 goddamn dollars?
Anonymous
Quoted By:
>>5683271 >passing on QB >ever >especially for dumb loser reasons like "shame" I truly feel sorry for you, anon. They're actually some of the best Revoltech figures released.
Anonymous
Quoted By:
>>5682373 Kaiyodo is run by morons?
Anonymous
>>5683281 They don't. Shit, you can get tons of them off Amazon for $15-35.
Newer ones though are around $50-60 because the price of all plastic shit has gone up in Japan and the customer is just gonna have to eat it.
Anonymous
>>5683271 You might as well buy them Anon, most of them are still pretty reasonably priced unless you want the 3 LE pack-in girls, or Menace and Melona.
They're only as lewd as you make them.
Anonymous
>>5683363 It's really all about paying the Chines factory workers, that has gone up drastically.
Anonymous
>>5683540 Theres always other 3rd world countries they can get cheap labor from. But they're probably too invested into China to just pick up and leave like Hasbro did.
Anonymous
Quoted By:
>>5683549 Yeah. They made their own domestic factory in Kouchi I think, but all it can do is make those vinyl kits.
Anonymous
>>5681737 >>5681735 Still getting it, but I'm not so fond of the silver claws. Wish they were sharper at least, they look kind of cheap as it is right now.
Anonymous
Anonymous
Quoted By:
>>5683864 >expecting anything other than softness on a Revoltech We don't get edges anymore, anon.
Anonymous
>>5677884 How come AmAmi spells their name Oh-Ami on their invoices and at the bottom of their site? Whats the deal with that? Is that supposed to be their engrish name or something?
Anonymous
As promised in the other thread. KT Project Horse Colored version. Damn thing is bigger than I thought. Much bigger and heavier than the Kirin. Wish it was balanced better.
Anonymous
Details fantastic. Joints are ratchet type if your not a fan of that. Only peeve is I had to remove a segment of the neck to get his head up and the fact you cant rotate his head.
Anonymous
None of my current revos fit properly but you can do interesting things. With the parts.
Anonymous
Quoted By:
>>5684717 >RULES OF NATURE Anonymous
Anonymous
If there's a pic of something in particular with the horse someone wanted, request it and I'll post it later. For anyone who was ever interested, Kaiyodo is re-releasing the entirety of the KT-Project line. So if anyone is interested in photos of the Kirin, Dragon or Skeleton coloured Versions I can dump pics later.
Anonymous
Quoted By:
>>5684739 >there were more clones of Big Boss than you knew Anonymous
Quoted By:
>>5684756 Can you post a pic of it dragging a slave?
Anonymous
Anonymous
Anyone into 3A?
Anonymous
Quoted By:
>>5685270 Yeah, posted in a thread instead of starting a new one, like a newfag. Sorry guys.
That Nigga from the other thread.
All hail the bone goddess.
That Nigga from the other thread.
Oh fuck shes mad, ditch the kids.
Anonymous
Anonymous
Anonymous
>>5684503 The company name is Oh-ami.
Anonymous
>>5685931 So where does the AmiAmi part come from then?
Anonymous
Quoted By:
>>5686158 Thats the name of the store, and the companies name is different?
Anonymous
>>5683380 > They're only as lewd as you make them. True. I have Alleyne and pose her with various coldweapons and firearms, i think parents found nothing suspicious. Mom once says that she very busty lol.
>>5683271 Though i understand, want Shigguy and Echidna but they looks too lewd and will attract attention.
Anonymous
Anonymous
Quoted By:
>>5686440 Honestly, no one is going to notice if you put them with other figures, unless they're in obviously lewd poses.
Anonymous
Hey guys, I got an Iron Man from Revolmini but one of his arms keeps popping out whenever I try to pose as if the peg hole is not big enough for the peg.
Anonymous
>>5687346 I *think* you could try heating up the joint by immersing the joint in hot water from your sink, or boiling water for a few seconds. Or a hair dryer.
Or you can try using a tweezer or similar to just work around in the hole to widen it a tiiiny bit.
Anonymous
>>5687355 I can back up. I softened the arm/peghole but also the joint in hot water for a minute. After that I put them together while they were still soft and squeezed a bit so they can refit themselves without the peghole being too big but just enough to fit the joint for a proper fit. After that I put the figure in cold water and left it there for about 5 or so minutes. Now I can rotate and position the arm without it popping out the shoulder joint.
Anonymous
Anonymous
Quoted By:
>>5686441 Gonna make a custom saddle with polymer I have lying around. I also have flexible sculpey and a fuckload of sugru as well. I might make it happen.
Anonymous
Do you think replacing War Machine's shoulder joints with double-ended ones would help the look, as in bring it down the shoulder pads so it's not raised up so high?
Anonymous
Anonymous
Quoted By:
>>5688068 I don't own the figure.
Anonymous
Anyone have this guy, how is he?
Anonymous
Quoted By:
>>5688089 Probably the best movie related product you can get imo. First release had flimsy joints so go with Legacy version. He is a bit small for his design.
Anonymous
Oh boy, what could it be?
Anonymous
>>5691178 It's exactly who you would expect to arrive in a box.
Anonymous
>>5691180 >they stuck the fucking tape that holds the stand to the face of the cardboard box cutout Gee, thanks Vulcanlog. It's not like I wanted my cardboard box without tape pulling the green off it or anything.
Anonymous
>>5691234 Same damn thing happened to me, environment be damned, wrap that shit too!
Anonymous
Quoted By:
Revoltech when?
Anonymous
>>5691234 >>5691283 Hmm...No revo container for Venom? Looked all around, it's brand new, no container for his extra parts? Or did the poor chinese slave packing this forget to include it?
Anonymous
>>5691234 Damn, that sucks. Mine was just taped to the inside of the box.
>>5691308 Nope, he didn't come with one. Honestly, I don't think all his hands would have even fit. I've got all of his accessories I'm one of those plamo hardware containers and they take up three or four partitions.
Anonymous
Got in my favorite map/gear stealing cunt from Monster Hunter. Fortunately his grabber for items is light enough that he can hold it one handed with little worry on dropping down like the Palico's lance.
Anonymous
>>5691358 And one for fun.
As for the other accessories, pickaxe is nice but I don't see myself making a display for mining minerals unless they crack out a Gravios or Uragaan vulcanlog.
The trap is okay and works for a display. Kind of wish Tigrex was a little larger but it fits for a display of him trapped on it.
Anonymous
>>5691338 >Nope, he didn't come with one. Damn, that sucks. Good thing I have an extra then, since I don't have any things like you do.
>>5691358 >>5691367 Wow, those little thieving cunts are out already? Might pick up the Palico for the fire/meat/char set.
Anonymous
>>5691358 >map/gear >map >nice ration you got there.jpg >ration Anonymous
>>5691395 He stole a fair amount of rations on my early runs in 4U. Same with my map being a magnet for attention to them. Annoys me to no end since I forget to craft stuff like energy drinks early on.
Anonymous
>>5691406 Was it your first Monster Hunter game?
Anonymous
Quoted By:
>>5691422 3 Ultimate was but I didn't invest nearly as much time there compared to 4U. Nowadays I'm playing Freedom Unite to kill time until Generations.
Anonymous
Quoted By:
They really need to make a revo/vulcan/whatever Liquid/Ocelot/Armstrong/something.
Anonymous
>>5688027 Somebdy pls. This looks ridiculous
Anonymous
Quoted By:
>>5691603 I'd help but I don't have him so I can't offer any meaningful advice. Revo threads are also kind of slow, like a lot of /toy/. Sorry Anon. Someone will probably have an answer though if you give it some time.
Anonymous
>>5691373 If you're into revoltechs or really any figures with a bunch of small accessories, l I'd recommend picking up a couple. They're like three fifty each at home depot, and you can usually fit accessories for about 15 figures into one. Realistically I can't think of anything that's been a better buy for toys.
Anonymous
>>5691666 Well, I don't really have trouble fitting all the parts in, at least. Everything fit for Snake here. Just a bit weird he didn't include a parts box. Are they just cheaping out on them since they've included much better stands or something?
Anonymous
>>5691686 I was gonna say it might be a vulcanlog thing, but ultron didn't come with one either now that I think of it.
Anonymous
Quoted By:
>>5691713 Might have to invest in one of those boxes then if this continues. Either that or take some lesser used parts of mine like the ones from the MH monsters and shove them into other boxes with little parts like the Vic Viper or something.
Anonymous
>>5668543 When is Sakamoto due out? I really enjoyed the Manga/Anime and I'd be completely down for a figure, but he looks kind of weird. Need to see a review before deciding.
Anonymous
Quoted By:
>>5691713 none of the Sci-fi ones include a box.
Anonymous
Anonymous
Quoted By:
>>5692109 This should've been a figma, it looks awful. The torso is WAY too fuckin long, look at how low his hips are.
Anonymous
Quoted By:
>>5692109 Yeah, it's almost so good too. But the face is really off and that middle piece for articulation makes him look like a robot.
Anonymous
Anonymous
>>5692191 >legacy of legacy of revoltech announced Anonymous
>>5692191 >D-day LAYTON
RE-RELEASE
FUCKING
WHEN
Anonymous
Anonymous
Quoted By:
>>5692191 Oh good they are doing something.
Anonymous
So this seems to be part of 10th anniversary, Revo of Underwater Knee socks.
Anonymous
Anonymous
Anonymous
Quoted By:
>>5686440 I had Nowa with her sex face on, but she was holding a guitar, so it looked like she was singing.
Anonymous
Anonymous
Quoted By:
>>5692191 >Dante is there I dreamed a dream for a decent Dante figure for once, please
Anonymous
Quoted By:
>>5692194 every revoltech gets re-released and legacy'ed
Anonymous
Quoted By:
>>5692597 >>5692601 I love conix's art, will buy
Anonymous
Quoted By:
>>5692597 >Underwater Knee socks thanks for the new fetish man
Anonymous
Quoted By:
>>5684756 How does he push the buttons
Anonymous
>>5685793 >>5685796 >>5685798 Do you just legit have 3 of these
Anonymous
>>5684756 I want more close-up pics of the Takeya skeleton, I have the rust colored ver and am currently considering between the bone or rust colored ver for the samurai skeleton
Anonymous
>>5692802 >8,980 JPY for a Revo???!? mfw
Anonymous
>>5675691 Kaiyodo in general doesn't really try marketing towards the same demographics as their competitors, because collector-focused articulated figures have always been more of a side business for them. The bulk of their business, even before Revoltech, came from capsule figures and products aimed at older audiences (miniature animal and plant replicas, etc.). That's the main reason we've gotten things like the Danboards, Rilakkuma and other mascots, and the Takeya line - rather than the usual "try to predict what will be popular and milk it before nerds move on to the next thing" strategy employed in this field, Kaiyodo instead tries to woo people who don't normally buy posable figures in the hopes of creating new buyers.
Anonymous
Quoted By:
>>5693218 Well he is an exclusive release last I remember. A lot better than the Ground Zeroes Snake Revo at least since he was pretty pricey last I saw him on Mandarake.
Anonymous
Quoted By:
>>5691666 I've got one of those. Works well.
>>5693218 Golden Age over
Anonymous
>>5692191 >>5692191 >>5692191 >>5692191 >DANTE >RAOH Please let them be re-releasing Melona, Menace, Branwen, Annelotte, Ed & Al from FMA, and Aldora too. I want those so damn badly.
In other news, Venom Snake is fun as fuck. Kind of weird they didn't go with revo joints for the legs, but they work. He feels about as good as Raiden.
Anonymous
Anonymous
>>5693943 Tried to remember the poses from the games, but I didn't use any references, so yeah they're off a bit.
Anonymous
Anonymous
>>5693939 He used to in early version.
They really should take votes on possible future Legacy, assuming they still have the rights to all past releases.
I want all the Getters again.
Anonymous
>>5694005 >They really should take votes on possible future Legacy, assuming they still have the rights to all past releases. That could go either really well, or lead to completely fucked shit tier choices. I just want the rest of the QB figures Legacy'd already. And Dante/Ed/Al because I totally missed out on all of those and they go for retarded prices.
Anonymous
>>5694023 The original Dante was garbage, I'd rather have a completely redone version.
Anonymous
>>5694027 Holy fuck, is his face really that bad? That looks like something out of a bootleg thread.
Anonymous
Anonymous
>>5692956 Ill see what I can do.
Anonymous
Quoted By:
>>5694047 Woops wrong pic. I dont have this macro addon for my phone anymore but when I get sick of overwatch Ill get the box out again.
Anonymous
>>5694005 Yo, what is that figure?
Anonymous
Can't wait. These'll will be my first Revoltechs in years though.
Anonymous
Quoted By:
>>5694136 Rough sculpt for Venome Snake.
Anonymous
>>5694148 I swear that Lee face is revo Woody tier for exploiting.
Anonymous
Anonymous
Anonymous
>>5694033 it's not even the face for me, that image is blown up like 3 times the size of the figure in real life.
What kills me is how the only revoltech joints in the thing are his fucking ankles. Swivelshit for everything else.
Anonymous
>>5694323 Can't be helped since Dante was not a Revoltech originally. The first officially made Revos were the Evas and Assemble Borgs.
Anonymous
Quoted By:
>>5694392 Maybe they'll redo the figure in all revo joints or something.
Or not.
Still, crossing fingers for the rest of the QB line and some of the more expensive stuff to get re-released.
Anonymous
>>5694323 >Swivelshit for everything else. And because of that, he not only posed like complete garbage, he also looked like complete garbage, too.
Anonymous
>>5694027 >those hips what the actual fuck
Anonymous
>>5694482 >>5694484 Well...Vulcanlog is doing MH stuff. M-maybe they'll do a Dante for the uh...Upcoming DMC4-based Pachinko machine or...Or something.
Anonymous
So I just got Stitch and he's barely a Revo (only one joint) but I love him. This is what modern Revo should be. I really don't mind the small 3 mm Revo joint, I think they're lovely to hold pose. However the bigger Revo joints are problematic and needs to go, or at least redesigned to allow more rachet angles. I always liked Revo selection and licenses more than Figuarts or Figma. I hope they hold their Disney licenses and continue making things like this, plus maybe more vidya stuff to make niche of themselves since Figma already had animu on lockdown and Figuarts had capeshit, star wars, and dragon ball.
Anonymous
>>5694490 >forgetting arthur he will sold like shit, right?
Anonymous
>>5694655 Honestly forgot he even existed. I'm too hype for the MH figures and you just know the Female Kirin Hunter is gonna be scalped to fuck and back.
Hope she can headswap with the QB figs.
Anonymous
>>5694655 >>5694660 Literally who character get a decent figure made. At least he can be part of the UMvC collection that I have.
Dante is literally no 3 most popular character Capcom had in Famitsu's all time favorite, behind the MH felines and Megaman.
Anonymous
Quoted By:
>>5694715 Yeah, dunno why they bothered to make an Arthur figure.
Anonymous
>>5694575 >or at least redesigned to allow more rachet angles. Um...what other Revos do you have? They did just do that during Legacy run, I don't think it is physically possible to have more ratchets.
Anonymous
>>5694930 I have MH Rathalos hunter, Yotsuba, PW Snake, Raiden, Venom Snake, Vector Cannon Jehuty, Anubis, Ultron and Stich. The smaller joints are fine, but things like Raiden's ab crunch are major pain in the ass. Used to have the non legacy Mk7 but I sold it.
I don't have any of the Legacy yet, are they that much better?
Anonymous
>>5694715 You're the type that just likes bands to play their radio singles at concerts eh
Anonymous
>>5695148 The ab crunches on Raiden/Snake are more hindered by the actual shape of the body than by the ratchets. But thats true of any ab crunch, you're not just gonna bend things like a knee or elbow joint.
Anonymous
Quoted By:
>>5695168 Nah, I've played G&G and SG&G, and Demons Crest to boot. I'd rather have had a popular Capcom character (or another Female Hunter, maybe Narga/Lagia/Barioth armor) over Arthur.
Anonymous
>>5695148 >>5695227 The fuck are you two on about? Raiden's ab crunch is perfect, one of the best I've ever seen
Anonymous
>>5695251 Its not aboutbhow far it would go. Its about the ratchet angles and fine tuningof the ab angle. I dont think its a big deal, all Im saying is that it'll benefit the figure if it had micro adjustment option. I skipped on MH Rathalos and Zinogre monster after seeing that they both have big rachet joints
Anonymous
>>5695286 That's kind of an issue with all Revos isn't it? I still think it's quite manageable though
Anonymous
Quoted By:
>>5695286 The Zinogres are pretty good. The Rath is...Not bad per se, but theres just not much you can do with him. The wings can go up and down, you've got the tail segments, the head and legs...I mean, he's well jointed, but you still can't get around that bigass wings mean he can't hold anything or do the sorts of poses guys with arms can.
Anonymous
>>5695298 Yeah, but the issue is kind of specific to the bigger joints now. The 3mm joints are excellent and in general I am in favor of Revo rachets. I love that Revo guys don't shift and lean on display. For example, NECA xenos would greatly benefit from Revo trademark joints. These guys have twig arms and legs, but burly body, head and tails and because of that they barely hold their pose. Some of them are too loose and have floppy joints, while the one that has tight joints kind of break a lot.
Anonymous
Quoted By:
>>5695309 I honestly prefer ratchet joints for everything. They're much more solid overall.
Anonymous
So im new to Revoltech. Can anyone explain to me the main price difference/quality between Figma and Revoltech?
Anonymous
>>5695869 Depends who you pick up honestly. Venom Snake and Revo Ultron are newest ones from Vulcanlog which is still Revoltech and they are far bulkier than most of my figmas. Especially if you compare Venom to Figma Solid Snake.
>>5693487 Anon here gives an idea of what Revoltech is but price is something someone else can answer.
Anonymous
>>5695869 Revo's are around 6" tall depending on figure. Honestly the only real difference is the joints and the sculpts. Revo's usually use...Revoltech joints! Which people may or may not hate, they're just ratchet joints, which are used in a lot of figure lines (Transformers notably use them often).
And figmas use whatever, usually ball joints.
Prices vary a lot, but have gone up recently because plastic/labor costs have gone up.
tl;dr If you like it, buy it. Sticking to any one brand is dumb.
Anonymous
>>5695869 Revoltech name comes from the trademark rachet joint - Revoltech. Some people hate it, but most people here love it. It is a bit weird at first, but when you pose it right unlike other joint Revo joints are bombproof - they won't lean, lose pose, or slide out. Barring a clear design flaw (like using joint that is too small), Revo joint just doesn't get loose period.
Both Revo and Figma cater to anime/pop culture fans. Revo line selection is more of a "bro" anime, and focuses a lot on mechas like ZOE, Eva, Getter Robo, Gurren Lagann etc or anime like Sengoku Basara while Figma is more focused on waifus.
Anonymous
>>5695911 >Figma is more focused on waifus. I dunno, figma hasn't put out a line of lewd as fuck titty monsters with actual tits and lightly sculpted vagina yet like revo has.
Anonymous
Quoted By:
>>5695914 Barring that GSC or whatever can push out plastic waifu's till the end of time. Now I'm curious how well they take advantage of the new printing tech for realistic faces on the next go around and also how posable the 2.0 blank bodies are.
Though Revoltech can focus on other licenses that are usually not considered at this scale.
Anonymous
>>5695914 Come on, man. You can do better than this.
Anonymous
>>5695928 His neck is weird when trying to turn the head. I'm no professional, just trying to have some fun.
Anonymous
Quoted By:
>>5695887 >>5695896 >>5695911 Thanks guys, appreciate the input. My TSF seemed a bit stiff but I assume thats just because ratchet joints. I think the only thing that puts me off is the really obvious joints sometimes, They dont always stand out to me as much of Figma compared to Revo, but I think i'll get some Revo figures. Cheers!
Anonymous
Quoted By:
>>5695934 No fun allowed, posing toys is very serious business.
Anonymous
Who is the best "starter" Revo Takeya stuff. I want the humanoid japanese god but there are so many of them
Anonymous
Quoted By:
>>5695988 I don't think there's a real "starter"
Just go with what variant suites your needs but someone will note if there's any issues to know about.
Anonymous
Quoted By:
Wondering if this is the doujin only or includes the figure
https://solarisjapan.com/products/vanquished-queens-2 Seems too good to be true
Anonymous
Quoted By:
>>5669026 Sideshow looks promising. Havent bought anything from them yet but ive been looking around that site for a while. Hopefully someone else here has so they can give their onion on the site.
Anonymous
>no Branwen's on Mandarake
Anonymous
>>5696212 Just pray with the rest of us that the 6th brings us news of every missing QB a Legacy.
Anonymous
>>5696454 Is there anything wrong with the non Legacy version? I bought Branwen two weeks ago through dick impulse for $100 from a jap ebay seller, it's now in transit
Anonymous
Quoted By:
>>5696502 Not that I know of, just that she never got a solo release, just that expensive as fuck LE box set, so finding her is a real bitch.
Anonymous
>>5696454 I doubt it. Guessing from Kaiyodo's style, it will be some old Revos as 10th anniversary version like Danboard, EVA-01, etc. Then some special projects like the Underwater Knee Socks, maybe Senmu himself. Also might see the rumored Revoltech Base Body if that paper was real.
If it was something brand new and going back to basics, I want some new Yamaguchi robots Revoltech, fuck Sentinel it can be done cheaper than those.
Anonymous
Quoted By:
>>5696502 No issues, she was out way after the joint problem was fixed.
Anonymous
>>5696699 >rumored Revoltech Base Body Wuzzat, one of those blank bodies ala figma?
Always seem like such a waste to me.
Anonymous
>>5696703 Some use it as artist reference but there's other appeals like having a blank body for random posing and setups rather than character specific poses or restrictions in the sculpt. If Revoltech can do one I have a lot of anticipation since Raiden is one of the most posable figures in my collection.
Anonymous
>>5696790 Yeah, I know about it's use as an artists tool, but those have been around for a long, long time, by many companies. It feels like such a waste of time and resources for a professional animu and mango figure company to make a "blank" figure like that.
Anonymous
Quoted By:
>>5696794 I see your point but if they're getting those out, especially like Figma 2.0 blank bodies then there seems to be a demand. Plus it's seems simple enough that they don't see it as a waste.
Anonymous
>>5696703 I think those have high potential of sale to non-collectors, the normal folks.
Art references could sell with all the aspiring illustrators, manga artists and animators in Japan, and a blank fun posing figure have a low line of entry for someone to just pick it up compare to all the licenced stuff.
Also, Kaiyodo have actual sales data on this. When a manga artist was featured on TV (forgot who it was), he was shown using an AB guy as posing reference, and a lot of people hunt down what that figure was, and the stock of Last Run AB sold out in an instant. I thought they would make more AB in future but I think they might actually go for the base body blank.
Anonymous
Quoted By:
>>5696794 >those have been around for a long, long time They suck though. Good ones are basically those 1/6 figures and are a bit over priced, and not that poseable.
Anonymous
Quoted By:
>>5696813 >forgot who it was Oh it was Fujita. That's funny.
Anonymous
Quoted By:
I hope more Branwen's show up on Mandarake soon. Only LE one I need now
Anonymous
This has probably been asked before, but what are the chances of a Legacy Wall-E?
Anonymous
Quoted By:
>>5697013 Unless there is a Wall-E 2 coming (please no) like 1%.
Anonymous
Anonymous
Anonymous
Anonymous
Quoted By:
>>5698003 He's gonna keep us waiting... huh.
Anonymous
Bought Figure Oh for the Saint Seiya article but there were some actual Revo news in it.
Anonymous
>>5699730 Uggh... the wrist joint on Ironman still makes me triggered. Is there a way to custom yourself out of it, maybe drill the peg deeper and dremel out a cavity for the ball joint?
He's 6.75" - the tallest IM import coming this year and will be in great scale with ML figures - unlike the figuarts one. Mafex had too much QC issues and IM needs some revo joints to hold the flight poses and such. This guy is so close to being the perfect IM
Anonymous
Quoted By:
>>5699730 >AND they are going to take votes on your favorite past Revos. Don't know if that will lead to anything like rereleases though. Ok, so how hard can we spam the shit out of the voting mechanism to possibly get a Melona re-release?
Anonymous
Quoted By:
>>5699737 Maybe ask the anon's in the customs general? They would probably provide the tool advice when approaching that. Though wouldn't you need a longer wrist peg if you want to hide the breakage in the gap and retain the look and movement?
The only thing I'm annoyed by Mark 45 Iron Man figures at this scale is the weird handguards that give him a gloved look in certain angles.
Anonymous
>>5699730 Paragraph talking about Yamaguchi says next issue will announce ''the topical new hero'' 話題の新ヒーロー
Hm, who is new and popular now?
Anonymous
>>5699786 I want a Revo Deadpool but that can't be it
Anonymous
>>5699802 I thought of that too, you never know, Yamaguchi does like him, since he is red and uses guns and swords.
The fact that it says Hero ヒーロー makes me think comicbook related. Not sure what else is there that is not Bandai territory. I doubt anyone else watches Concrete Revolutio so that dream is dead.
Anonymous
>>5699802 Honesty I can see that and for the dynamic nature of Revoltech, it works.
>>5699786 I don't follow cape movies all that much but you got options with Civil War (barring Iron Man) and BatmanvSuperman. Not unless they go into the superhero manga like My Hero Academia for an All Might Revoltech.
Anonymous
Quoted By:
>>5699802 >>5699830 >>5699834 I'd like to see a Revopool. That'd be neat, I'd think.
Anonymous
>>5699786 One Punch Man.
If Kaiyodo goes back to classic seinen characters who haven't got much love in toys, I would hand them my money in chunks like I used to grab 5 revoltechs at once.
Anonymous
Quoted By:
>>5699834 Well it says NEW hero so most of the recent movies are kind of out except for Black Panther and Wonder Woman, and that manga is Bandai territory. Deadpool is way more likely compare to those.
Other than that...Big Order? Kuromukuro?People watch that?
Anonymous
Quoted By:
>>5699868 by classic seinen or manga, I mean, Crying Freeman, Dororo, Apocalypse Zero (I think revo would be better than the shf and I loved the SIC but would love revos of those), City Hunter, Gon...
Anonymous
>>5699868 I think a OPM would probably set a fucking sales record if they made one. That shit is pretty popular all over.
Anonymous
Quoted By:
>>5699868 I would say Bandai has that...but somehow getting figma so who knows.
Anonymous
>>5699882 They could probably challenge the figma if they do better faces and manage the cape from limiting the figure. Not sure if the figma has 2.0 arms yet.
Anonymous
Quoted By:
>>5699786 Okay the way it says birth of new hero figure !?
makes me think DP or Saitama, at least a reluctant hero type.
Anonymous
>>5699894 to be honest, I feel Saitama fits Figma more than revoltech. Same with that Sakamoto figure, being able to stand up straight with the arms at the side like a normal human being instead of "hips thrust forward ready to fuck some shit up" is essential for those characters. They don't play to Revoltech's strong suit, basically.
But you know what property totally does?
Anonymous
Quoted By:
>>5699786 MY HERO ACADEMIA!!!!
Anonymous
Quoted By:
>>5699902 I should really get around reading it but the pages I've seen are absolutely perfect for Revoltech. Not to mention the musculature of some of the characters.
Anonymous
Quoted By:
Would it be worth it to drop 6000 Japanese dollars doodle on a used Gigan from Mandarake?
Anonymous
Should I buy Revoltech Queens Blade Cattleya?
Anonymous
Quoted By:
>>5700621 Cattleya is great, as long as you get the Legacy of Revoltech version, which has fixed joints. Easily one of my favorites.
Anonymous
Anonymous
Posting eBay links is against the rules here but someone is selling a Revo Zinogre Hunter on there for $30 Buy It Now, just thought at least some people on here would want to know
Anonymous
>>5702167 Shit, that is a great find. Thar was aroundt a month ago before I went ahead and bought one.
Also we're gonna need a new thread soon, this ones almost dead. Anyone got an updated OP?
Anonymous
Quoted By:
>>5702177 *Wish that was around
Fuck my spelling is shit.
Anonymous
Anonymous
