/wsr/ - Worksafe Requests » Thread #1286707

[7 / 3 / 4]

422KiB, 1981x433, setup.jpg

Anonymous Fri 25 Nov 2022 04:00:59 No.1286707 View View Reply Original Report

Quoted By: >>1286762 >>1287237 >>1287285

Pic related is the setup: After about a month, I began getting intermittent I/O errors from reading the mounted dir of the hdd, fixed after reboot. Now, I am also getting USB disconnects.
Which of the three is the likely point of failure? I am currently trying a different USB port to see if that changes anything.

Anonymous

View Same Google ImgOps iqdb SauceNAO dmesg.png, 91KiB, 1561x644

Anonymous Fri 25 Nov 2022 04:30:10 No.1286715 Report

Quoted By:

Different USB port gives same results. Here is a dmesg at the time of failure.

Anonymous

Anonymous Fri 25 Nov 2022 04:36:46 No.1286716 Report

Quoted By:

It seems that this may be a result of energy saving. I have disabled it and will see if it disconnects/fails again.

Anonymous

Anonymous Fri 25 Nov 2022 08:39:41 No.1286762 Report

Quoted By: >>1287418

>>1286707
>which of the three
Probably the enclosure, if it was the hard disk the enclosure would correctly relay IO errors instead of locking up.

Anonymous

View Same Google ImgOps iqdb SauceNAO Power_Dock_drive_cloner_and_stor (...).jpg, 23KiB, 800x800

Anonymous Sat 26 Nov 2022 11:48:39 No.1287237 Report

Quoted By:

>>1286707
>Pic related is the setup
In the old days, I used external cases like you. But nowadays, I use external docks and plug the drives in and remove them as needed. Docks are more convenient as I can use multiple drives. They also let me store each drive in its antistatic envelope on the bookshelf.

Anonymous

Anonymous Sat 26 Nov 2022 15:29:02 No.1287285 Report

Quoted By: >>1287418

>>1286707
>Which of the three is the likely point of failure?
The USB 3.0 cable. Orico enclosures while cheap are pretty good, but being cheap it's obviously packed with a cheap cable

Anonymous

Anonymous Sat 26 Nov 2022 21:18:49 No.1287418 Report

Quoted By:

>>1286762
>>1287285
Still getting errors. Will try to use a USB 2.0 cable and see if it persists. I also ordered an enclosure from a different brand.

Capcode	All Only User Posts Only Verified Posts Only Moderator Posts Only Manager Posts Only Admin Posts Only Developer Posts Only Founder Posts
Show Posts	All Only With Images Only Without Images Only Spoiler Images Only Non-Spoiler Images
Deleted Posts	All Only Deleted Posts Only Non-Deleted Posts
Ghost Posts	All Only Ghost Posts Only Non-Ghost Posts
Post Type	All Only Sticky Threads Only Opening Posts Only Reply Posts
Results	All Grouped By Threads
Order	Latest Posts First Oldest Posts First

On these archives

Your latest searches