>>1065202You needed help making a wheel cover/disc wheel?
Measure the diameter of your wheel.
Divide it by 2.
Take a piece of string, tie it to a nut and bolt.
Cut the string to the diameter of your rim divided by 2, now called the radius.
Do it on a staples poster board.
Bolt the string/not to the poster board and draw a line, do the same with a utility knife using your line as a guide
Make 2 circles.
Now take your wheel. Hold it in front of you as if you were behind the bike
Your spokes each are laced to one side of the wheel and they alternate.
Zip tie your poster board to each spoke on the corresponding side.
To clearance the valve stem. Use a socket as a guide.
Walmart sells flat black spray paint for $0.99 a can. You have to be over 18 to buy it though.
