/toy/ - Toys » Thread #9574196

[326 / 93 / ?]

2MiB, 1920x1440, IM Hornet (Copy).jpg

Welcome to the Gunpla/Plamo General

Gelgoog Guy !!XOac6frt+Ny Sun 23 Jan 2022 17:47:52 No.9574196 View View Reply Original Report

Quoted By: >>9574206 >>9578432 >>9587457

>"If you're new, you're gonna fuck up. Don't worry! If you're experienced, don't make the new people worry!"

***READ THE GUIDE***

Discord
https://discord.gg/SpSw2QbycH

The guide:
https://docs.google.com/document/d/e/2PACX-1vSBDfE8Iz-a86DZJCR5MHRW6tjkQX-y4-ZpUc_vHjRfx_i2FB0zR1usdrgUJ4wNTs1iDFZmTQHF66X_/pub

And a handy guide to other types of plamo: http://www.mediafire.com/view/1vf1aw7v91pz5pa/Airfix%20Model%20World%20Specia%20(Scale%20Modelling%20Step-By-Step).pdf
http://www.scalemodelguide.com

Some line art:
https://imgur.com/user/Gundaml1neart/posts

Previous thread: >>9559229

Gelgoog Guy !!XOac6frt+Ny

View Same Google ImgOps iqdb SauceNAO Group Build (2019_01_03 15_19_20 (...).jpg, 191KiB, 4113x583

Gelgoog Guy !!XOac6frt+Ny Sun 23 Jan 2022 17:48:33 No.9574198 Report

Quoted By: >>9574442

==GM GROUPBUILD==

Build and customize a mobile suit from the GM family of mobile suits in any way you can imagine! That means any suit that either has "GM" in the name or in its model number is A-OK to use. This includes
>Normal OYW GMs and their variants (ie. Sniper, Cannon, Interceptor)
>Post-OYW GMs like the Powered GM or GM Quel
>GM II/GM IIIs
>Suits from the RGM family of suits (Jegans, Jestas, Heavyguns, Jamesguns, Javelins)
>SD GMs
Conversely, this excludes:
>UC suits without the RGM model number (ie: Nemo (MSA-003), Gun Blastor (LM111E03))
>GM equivalents from other Gundam timelines (Daughtress, Windam, Adele, etc)
You can still source parts from other kits for your builds, but the basis of your entry has to be at least 50% GM when it comes to the original parts used. The 50% limitation refers only to the body itself, you're free to do what you wish with your suit's equipment.

Send all photos (Both WIPs and Finished photos, with multiple angles/poses) and a short description of your build to [email protected] once you're finished.

START - 11/1/21
END - 2/28/22

Anonymous

Anonymous Sun 23 Jan 2022 17:55:51 No.9574206 Report

Quoted By:

>>9574196
>Got the Chrome Plated PG RX-78-2
Any advice for the build?
Or should I leave it in its box to sell in 10 years?

Anonymous

View Same Google ImgOps iqdb SauceNAO 1642722686455.jpg, 924KiB, 4032x3024

Anonymous Sun 23 Jan 2022 18:02:13 No.9574216 Report

Quoted By: >>9574226

Can I use lighter fluid to wipe up and clean any excess when panel lining using Tamiya panel line accent? I've already top coated with pledge

Anonymous

Anonymous Sun 23 Jan 2022 18:05:24 No.9574226 Report

Quoted By: >>9574239

>>9574216
If you top coated over the panel lining, no. Otherwise, yes.

Anonymous

Anonymous Sun 23 Jan 2022 18:11:39 No.9574239 Report

Quoted By: >>9574265

>>9574226
I've just built and top coated. I'll be panel lining today and want to use lighter fluid coz I can't get X20, and don't trust testors enamel thinner with Tamiya. After that's done I'll top coat, add Decals and top coat again. Will this affect how my joints move? It's an rg

Anonymous

Anonymous Sun 23 Jan 2022 18:23:57 No.9574265 Report

Quoted By:

>>9574239
You should be fine. Joints should be fine.

Anonymous

Anonymous Sun 23 Jan 2022 19:17:25 No.9574373 Report

Quoted By: >>9574479 >>9574998 >>9575032 >>9575797 >>9577996

>>9573854
Sick of this fucking cope bullshit. I've built the RG QanT and the RG Raiser and both couldn't even keep their legs up without the joints sinking by the time the build is even done. They're models, not statues, they're meant to be posed. Nobody swooshes them around and slaps them into each other, but if the old RGs can't hold a single standing pose they're shit.
If it was user error I'd have the same issue with new ones like the Crossbone and Wing Zero, which I have not.
I'll never understand people who get so emotionally invested in defending a bad model kit. RGs are 30 dollars, it's not even a sunk cost thing.

Anonymous

View Same Google ImgOps iqdb SauceNAO 20220121_200637_copy_1322x1095.jpg, 308KiB, 1322x1095

Anonymous Sun 23 Jan 2022 19:44:22 No.9574442 Report

Quoted By: >>9574446 >>9574700 >>9575802

>>9574198
Already posted it on /m/ but my entry is coming along nicely and should be ready to start painting at the end of the month. Wrapping up the additional leg armor tonight and starting cleanup tomorrow.

Anonymous

View Same Google ImgOps iqdb SauceNAO 20220121_200704_copy_1321x1055.jpg, 302KiB, 1321x1055

Anonymous Sun 23 Jan 2022 19:45:24 No.9574446 Report

Quoted By:

>>9574442

Anonymous

Anonymous Sun 23 Jan 2022 19:55:52 No.9574479 Report

Quoted By: >>9574483 >>9574505

>>9574373
it's a model kit. it takes minutes to slap some varnish on the joint and tighten it

Anonymous

Anonymous Sun 23 Jan 2022 19:56:59 No.9574483 Report

Quoted By: >>9574505 >>9574689 >>9574938

>>9574479
that's too hard for some people.

Anonymous

Anonymous Sun 23 Jan 2022 20:02:39 No.9574505 Report

Quoted By: >>9574526

>>9574479
>>9574483
I wanted to get the RG but passed because of the weak joints. If I get it, assemble and spray pledge, will that be enough to put it in a pose and put away?

Anonymous

Anonymous Sun 23 Jan 2022 20:06:26 No.9574526 Report

Quoted By:

>>9574505
If you just want to pose it and put it away, you may as well use glue, but yes if you use varnish that will work.

Anonymous

Anonymous Sun 23 Jan 2022 20:40:27 No.9574659 Report

Quoted By: >>9574682

Just want to make sure, is any pledge work or just the floor gloss?
Because I only knew Pledge wood floor cleaner

Anonymous

Anonymous Sun 23 Jan 2022 20:47:45 No.9574682 Report

Quoted By: >>9575511

>>9574659
It needs acrylic in it. No cleaners, you want a sealer.

Anonymous

Anonymous Sun 23 Jan 2022 20:49:49 No.9574689 Report

Quoted By: >>9575513 >>9575552 >>9575592

>>9574483
The absolute easyest way to tighten joints is to put a small dab of acrylic paint where the limb connects to the body, shove the limb into where you put the paint, and then just wait. After about 20 minutes your connection will be leagues better. Hell it even works on the flimsy HG Barbie

Anonymous

Anonymous Sun 23 Jan 2022 20:53:36 No.9574700 Report

Quoted By: >>9574825

>>9574442
Lookin good anon. What all kits are you using for the final product?

Anonymous

View Same Google ImgOps iqdb SauceNAO 20220123_153215-min.jpg, 761KiB, 3024x4032

Anonymous Sun 23 Jan 2022 20:54:38 No.9574707 Report

Quoted By: >>9574725 >>9574760 >>9574765 >>9574805

Just finished my first RG kit. Goddamn besides some of the decals and GN Strips RG Exia was fun. I'm debating all the extra decals. I fucked up the first one so I'm gonna order a new sheet but idk. Decals give me anxiety. Still, this was sick and the posability of it is wild!

Anonymous

Anonymous Sun 23 Jan 2022 20:58:33 No.9574725 Report

Quoted By: >>9574731

>>9574707
order some aftermarket waterslide decals if you haven't already, they're more forgiving than the included stickers (because you can move them around for a while after placing them down) and they look better.
you can order bandai's official ones if you can find them in stock somewhere or alternatively get chinese ones, dalin is a good brand of chinese ones

Anonymous

Anonymous Sun 23 Jan 2022 21:01:17 No.9574731 Report

Quoted By: >>9574766

>>9574725
Ooooh I'll def look those up. This one has some shoulder stripes and I dropped it and it landed flush on the manual and I was just like "Welp, that's a sign."

Anonymous

Anonymous Sun 23 Jan 2022 21:11:49 No.9574760 Report

Quoted By: >>9574788

>>9574707
anon, we are in the same furry RP server

Anonymous

Anonymous Sun 23 Jan 2022 21:13:10 No.9574765 Report

Quoted By: >>9574788 >>9574940

>>9574707
clean up+remove those nubs you snapshitting discord tranny

Anonymous

Anonymous Sun 23 Jan 2022 21:13:23 No.9574766 Report

Quoted By: >>9574788

>>9574731
I get my Waterslides from Ebay, they have a shit ton of different slides. I actually got some holographic ones for the RG hi nu

Anonymous

Anonymous Sun 23 Jan 2022 21:18:34 No.9574788 Report

Quoted By: >>9575040

>>9574760
Oh no. What? W-which?
>>9574765
I will. Calm down, friend.
>>9574766
Yeah! I did a quick google search and found some. I'll order them later when I'm ready to decal it because decals make me wanna die. But waterslides are better, yeah?

Anonymous

Anonymous Sun 23 Jan 2022 21:24:37 No.9574805 Report

Quoted By: >>9574809

>>9574707
nice one Phil! see you at work tomorrow!

Anonymous

Anonymous Sun 23 Jan 2022 21:26:33 No.9574809 Report

Quoted By: >>9574819

>>9574805
Thanks! Lol who dis? Also doubtful. I work night shift alone.

Anonymous

Anonymous Sun 23 Jan 2022 21:29:52 No.9574819 Report

Quoted By: >>9574823

>>9574809
im the spooky ghost by you at work.

Anonymous

Anonymous Sun 23 Jan 2022 21:31:05 No.9574823 Report

Quoted By:

>>9574819
Well. Be a lad and go catch the bird in the lobby.

Anonymous

Anonymous Sun 23 Jan 2022 21:31:08 No.9574825 Report

Quoted By:

>>9574700
Built mostly from junk parts. The main body is a gm command, the head is one of the alternate heads the hg gm/gm came with, and the arms are from the vanilla hg gm. All the additional spare armor is made from a dissected hg lotto tank with a little bit of styrene sheet thrown in to fill gaps and bulk up certain parts.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1642797329592.jpg, 170KiB, 1500x1500

Anonymous Sun 23 Jan 2022 21:50:43 No.9574885 Report

Quoted By: >>9574895 >>9590432

The Zaku Revives and their soft armor option parts. Is there a "best way" to get that stuff off the sprue without leaving a mark/discoloration on the soft material? The majority of the rubberized armor that I've seen in pics online has some marks on it.

Anonymous

Anonymous Sun 23 Jan 2022 21:53:14 No.9574895 Report

Quoted By:

>>9574885
If I remember correctly it came out super easy. I don't think it marred the rubber too bad. Shit I can't even remember if it was in a runner. that being said I didn't use the soft parts.

Anonymous

Anonymous Sun 23 Jan 2022 22:10:34 No.9574938 Report

Quoted By: >>9575045 >>9575110

>>9574483
God forbid anyone want the product they paid money for to take less work to enjoy.

Anonymous

Anonymous Sun 23 Jan 2022 22:12:20 No.9574940 Report

Quoted By: >>9575014

>>9574765
>snapshitting discord tranny
Imagine typing mentally ill shit like this and thinking anyone should take you seriously.

Anonymous

Anonymous Sun 23 Jan 2022 22:36:28 No.9574998 Report

Quoted By:

>>9574373
Learn how to deal with it, you could've spent the energy you used for whining about it to fix it.

Anonymous

Anonymous Sun 23 Jan 2022 22:42:31 No.9575014 Report

Quoted By:

>>9574940
It's not hard to see when someone's terminally 4chinned, just ignore them

Anonymous

View Same Google ImgOps iqdb SauceNAO peak shit.jpg, 321KiB, 1920x1188

Anonymous Sun 23 Jan 2022 22:52:26 No.9575032 Report

Quoted By: >>9575057 >>9575061 >>9575732

>>9574373
>defending a bad model kit
>bad
>model kit
No such thing. It's like saying Everest is bad mountain because you run out of air halfway to the summit. Model kit is just a canvas for your skill.

Even pic related is not "bad". It is very difficult but still less work than building the thing from scratch.

>inb4 muh consumer product quality
>inb4 muh elitism
>inb4 fedora poster gets a stroke

Anonymous

Anonymous Sun 23 Jan 2022 22:54:50 No.9575040 Report

Quoted By: >>9575076

>>9574788
As soon as you see how much better Waterslides look compared stickers you will never go back. You Dont need to get nervous applying them, they are pretty forgiving. Just get some mark set, a eyebrow/cosmetic tweaser, some Q-tips and a small bowl of water and your good to go. Really though, they arnt that hard to work with.

Anonymous

Anonymous Sun 23 Jan 2022 22:56:43 No.9575045 Report

Quoted By: >>9575732

>>9574938
What

Anonymous

Anonymous Sun 23 Jan 2022 22:59:29 No.9575057 Report

Quoted By: >>9575094

>>9575032
Is that shit homemade, or really bad quality control?? Also what is it?

Anonymous

Anonymous Sun 23 Jan 2022 23:01:43 No.9575061 Report

Quoted By: >>9575094

>>9575032
Agreed but this is just bad though to the point where you might as well build it from scratch.

Anonymous

Anonymous Sun 23 Jan 2022 23:06:07 No.9575076 Report

Quoted By:

>>9575040
Shit yeah. I'm excited.

Anonymous

Anonymous Sun 23 Jan 2022 23:13:36 No.9575094 Report

Quoted By: >>9575119 >>9575140

>>9575057
>Is that shit homemade
Yes. In the original meaning of the "garage kit".
>what is it
The final boss of plamo: http://unicraft.biz/

>>9575061
>bad though to the point where you might as well build it from scratch
I can tell you've never built anything from scratch (and never paid for silicone by the pint). As shit as the castings are, it will take far less time/effort to fix them than it would take to design and make a new mold.

Anonymous

Anonymous Sun 23 Jan 2022 23:20:13 No.9575110 Report

Quoted By: >>9575732

>>9574938
Maybe you just don't like model kits.

Anonymous

Anonymous Sun 23 Jan 2022 23:24:00 No.9575119 Report

Quoted By: >>9575123

>>9575094
And even if you don't want to make a mold and just use putty and plaplate you still need to find the blueprints and follow them and pic related is what you usually get.
Personally I'd rather fix the bubbles and flash and shit.

Anonymous

View Same Google ImgOps iqdb SauceNAO kurowashi-dr.jpg, 131KiB, 800x525

Anonymous Sun 23 Jan 2022 23:25:01 No.9575123 Report

Quoted By:

>>9575119
And here's the forgotten pic related.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1200px-Lockheed_YO-3.jpg, 218KiB, 1200x954

Anonymous Sun 23 Jan 2022 23:32:22 No.9575140 Report

Quoted By:

>>9575094
>that abomination is supposed to become pic related
>have to scratchbuild the clear canopy yourself
No fuck you, I'm starting to feel what that idiot complaining about loose RGs is feeling, I'm not skilled enough at dealing with it so it's shit but unironically.

Anonymous

Anonymous Mon 24 Jan 2022 00:47:25 No.9575337 Report

Quoted By: >>9575428

>>9574199
Test it on a bit of sprue with pledge to make sure there is no reaction there but lighter fluid can be used in place of enamel thinner to clean panel line accent

Anonymous

Anonymous Mon 24 Jan 2022 01:43:31 No.9575428 Report

Quoted By:

>>9575337
Theyll be fine as long as the q tips are not very wet. Best to apply the lighter fluid to one q tip and lightly dab another q tip onto that one and that will rub it off without leaving lighter fluid or streaking the panel liner all over. Q tip needs some volume left to absorb the liner.

Anonymous

Anonymous Mon 24 Jan 2022 02:24:29 No.9575511 Report

Quoted By:

>>9574682
Dammit. I can't find pledge floor cleaner in my country, only for wood floor. Is using a dab of super glue okay?

Anonymous

Anonymous Mon 24 Jan 2022 02:25:31 No.9575513 Report

Quoted By:

>>9574689
Hmmm interesting. Worth a try

Anonymous

View Same Google ImgOps iqdb SauceNAO tightening joints with masking f (...).jpg, 383KiB, 1200x929

Anonymous Mon 24 Jan 2022 02:48:52 No.9575552 Report

Quoted By: >>9575592 >>9575660

>>9574689
There is also the masking fluid method.

Anonymous

Anonymous Mon 24 Jan 2022 03:15:33 No.9575592 Report

Quoted By:

>>9574689
>>9575552
You can literally use basically anything; paint, CA glue, dust. Anything that will add to the joint and add friction

Anonymous

Anonymous Mon 24 Jan 2022 04:03:36 No.9575660 Report

Quoted By: >>9575662

>>9575552
Whats a decently priced brand of liquid mask to buy? I have a pain in the ass masking session I need to do on a kit with a bunch of edges .

Anonymous

View Same Google ImgOps iqdb SauceNAO liquid-mask-vallejo-28850-85ml.jpg, 39KiB, 800x800

Anonymous Mon 24 Jan 2022 04:06:03 No.9575662 Report

Quoted By: >>9575668

>>9575660
Pic related is what I can recommend if you can find it where you live. Otherwise try aliexpress and any "soft type" nail art liquid mask.

Anonymous

Anonymous Mon 24 Jan 2022 04:10:59 No.9575668 Report

Quoted By:

>>9575662
Thanks, il keep a eye out for it when I go to my hobby shop to re-supply.

Anonymous

Anonymous Mon 24 Jan 2022 05:04:54 No.9575732 Report

Quoted By: >>9575872 >>9576054 >>9576098

>>9575032
Man you are really butthurt about getting made fun of for being a contrarian.
Sorry but no, by your logic you're a filthy casual for buying kits at all. Put in the work and make your own from scratch.
:)

>>9575045
Pretty simple. If I'm paying money for a product it shouldn't demand more work from me to function properly. Look better sure, but I'm not Bandai QC and I won't pay to fix their models for them.

>>9575110
I love model kits. I just don't buy bad ones

Anonymous

Anonymous Mon 24 Jan 2022 06:17:00 No.9575797 Report

Quoted By:

>>9574373
My RG RX-78-2 and MS-06S are still rock solid in terms of holding poses. Early RG syndrome is a meme spread by hamfist redditors. ONLY issues I have with the RX-78-2 are the fingers popping off occasionally and the Zaku has issues with the hip skirts. Otherwise 100% solid, no issues with poses.

Anonymous

Anonymous Mon 24 Jan 2022 06:25:18 No.9575802 Report

Quoted By: >>9576499

>>9574442
what's that little gun on the shoulder supposed to be or do?

Anonymous

Anonymous Mon 24 Jan 2022 07:23:47 No.9575872 Report

Quoted By: >>9576082

>>9575732
>it shouldn't demand more work from me to function properly
>consoomer who is upset he consoomed product that requires more effort than he is capable of
boo hoo

Anonymous

Anonymous Mon 24 Jan 2022 07:36:57 No.9575888 Report

Quoted By: >>9575975

>there are no bad builders, just bad model kits
fucking cucka cuckotsu and tranny92 faglords need to get the fuck off of my hobby

Anonymous

Anonymous Mon 24 Jan 2022 09:16:57 No.9575975 Report

Quoted By:

>>9575888
r u ok?

Anonymous

Anonymous Mon 24 Jan 2022 11:37:05 No.9576054 Report

Quoted By: >>9576082

>>9575732
Just because YOU personally can't deal with a model kit doesn't make them bad.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1643021803160.jpg, 770KiB, 2048x1536

Anonymous Mon 24 Jan 2022 12:09:35 No.9576079 Report

Quoted By: >>9576162 >>9576172 >>9576222 >>9585979

>Oh NO NO NO NO NO

>We got too cocky bro

Anonymous

Anonymous Mon 24 Jan 2022 12:13:24 No.9576082 Report

Quoted By: >>9576093 >>9576098 >>9586199

>>9575872
When did I ever imply that I bought it? I'm starting very clearly that I'm selective about what I buy. It's not about what I'm capable of. If I have the choice of buying an RG Gundam that Bandai wants me to fix for them or an RG Nu Gundam that can stand and pose perfectly because it has engineering leagues above the shitty old RX-78, it's obvious which one in going to buy.

>>9576054
Just because you enjoy fixing Bandai's mistakes doesn't make every model kit good. I'm the one being objective here. You're too embedded in your little hobby to think without bias. It's very telling that the second you're challenged in any way whatsoever you immediately resort to strawmanning and pretending that it's a matter of "can't" instead of "won't".
The whole "every model is good because you can fix it yourself" mindset is hilariously absurd. Imagine applying it to anything else.
>Just because YOU personally don't want to deal with fixing a faulty motor doesn't make this car bad.
>Just because YOU personally don't want to deal with sewing up the shoddy stitching doesn't make this shirt bad.
>Just because YOU personally don't want to sharpen this knife set doesn't make it bad.

Anonymous

Anonymous Mon 24 Jan 2022 12:22:48 No.9576093 Report

Quoted By: >>9576977

>>9576082
the difference is model kits are about putting the work in to build them whereas those other things are sold as finished products. if you were buying a knife kit it wouldn't be a bad kit if the blade part came unsharpened

Anonymous

Anonymous Mon 24 Jan 2022 12:26:47 No.9576098 Report

Quoted By: >>9576977

>>9575732
this is a really stupid post, you're already putting work in to assemble, trim and sand your models so what's so bad about taking a minute or two adjusting the joints with the various methods people are mentioning, a beginner can easily do it too.
>>9576082
unfair equivalence.
you are not expected to work on your car(okay maybe), fix your clothing or sharpen your knives.
what do you do with model kits? you're definitely supposed to put some work in.
refusing to fix something this trivial and instead just keep going on about "it's bad!" just seems so sad to me, tons of people enjoy these kits and have fixed them.

Anonymous

Anonymous Mon 24 Jan 2022 13:40:49 No.9576162 Report

Quoted By: >>9576516 >>9577663

>>9576079
I didn't care for these shows but weren't they just offensively bland?
Bandai is making more and more questionable business decisions.

Anonymous

Anonymous Mon 24 Jan 2022 13:48:45 No.9576172 Report

Quoted By:

>>9576079

Say what you will about those robots, but that praying mantis is pretty cool.

Anonymous

Anonymous Mon 24 Jan 2022 14:21:54 No.9576222 Report

Quoted By:

>>9576079
This always happens with mass produced new kits.

Anonymous

View Same Google ImgOps iqdb SauceNAO braveup.jpg, 1MiB, 1972x2688

Anonymous Mon 24 Jan 2022 15:47:33 No.9576359 Report

Quoted By: >>9576942

I think this might be the first kotobukiya kit i've built, it turned out great.

Anonymous

Anonymous Mon 24 Jan 2022 15:53:41 No.9576364 Report

Quoted By:

great, banzai hobby has a restock of kits i want and they can't ship to my country. wtf

Anonymous

Anonymous Mon 24 Jan 2022 17:15:06 No.9576499 Report

Quoted By:

>>9575802
Additional vulcan? According to the Loto manual its a 25mm machine cannon for use against armored vehicles and as anti-personnel. On something as big as a GM it would be more so it doesn't waste its larger ammunition on smaller target I guess. The shoulder itself is a hardpoint so it can theoretically be swapped out for other equipment as well such as the searchlight on the left shoulder.

Anonymous

Anonymous Mon 24 Jan 2022 17:22:47 No.9576516 Report

Quoted By: >>9576536

>>9576162
> but weren't they just offensively bland?

Sakugan started strong and then turned to shit by the halfway mark. Cool mecha design though and I would pick the kit up if it wasn't so overpriced for what it is.

Kyoukai Senki was okay, like a 6/10, but its only half over and the other half is airing in the summer. Its problem is that its plot is a little too simple for that kind of series so I'm hoping it picks up a bit more. The kits are also great from the couple I've built.

86 I have no clue on as i haven't bothered to watch it or buy any of the kits.

Anonymous

Anonymous Mon 24 Jan 2022 17:33:50 No.9576536 Report

Quoted By: >>9576552 >>9576587 >>9576706 >>9576784

>>9576516
season 1 of 86 is fine, i'd rate it slightly higher than kyoukai senki but not by much. it's very hamfisted with all of its themes and you can tell for the worse that it was adapted from a light novel. season 2 introduces an obnoxious loli character for the pedos to coom to and it just makes it annoying to watch. wouldn't recommend

Anonymous

Anonymous Mon 24 Jan 2022 17:44:51 No.9576552 Report

Quoted By:

>>9576536
>obnoxious loli character
She's fine, you're just an insufferable faggot.

Anonymous

View Same Google ImgOps iqdb SauceNAO MSGZZ Puru Fuck You Faggot.jpg, 37KiB, 735x624

Anonymous Mon 24 Jan 2022 18:01:06 No.9576587 Report

Quoted By:

>>9576536
>loli character for the pedos to coom to
Get a load of this comrade.

Anonymous

Anonymous Mon 24 Jan 2022 19:19:53 No.9576706 Report

Quoted By:

>>9576536
The only obnoxious thing is you thinking your opinion matters

Anonymous

Anonymous Mon 24 Jan 2022 19:37:16 No.9576737 Report

Quoted By: >>9576979

pedosquad out in full force

Anonymous

View Same Google ImgOps iqdb SauceNAO MSGZZ Puru Tongue.jpg, 22KiB, 462x532

Anonymous Mon 24 Jan 2022 19:49:13 No.9576760 Report

Quoted By:

Whatever you say Dr. Pizza.

Anonymous

Anonymous Mon 24 Jan 2022 20:12:37 No.9576784 Report

Quoted By:

>>9576536
Such exaggerated reaction might lead some people to think you are in the closet.

Anonymous

Anonymous Mon 24 Jan 2022 21:33:37 No.9576942 Report

Quoted By:

>>9576359
Looking good, maybe need more cleaning up on the panel lining on the tip of the shoulder pads.

Anonymous

Anonymous Mon 24 Jan 2022 21:53:12 No.9576977 Report

Quoted By: >>9577012 >>9577264 >>9577996

>>9576093
>>9576098
>the difference is model kits are about putting the work in to build them
>you're already putting work in to assemble, trim and sand your models
Yes, these things are universal, expected of all kits, and unavoidable. That's not comparable to fixing engineering mistakes, no matter how easy the fix is. A modeler that wants to put in the work to make a kit look and move perfectly can do so with any kit in existence. That doesn't make them all equal, and the only unifying baseline to judge them on is what they're advertised to be and what they are out of the box. It doesn't matter how much /toy/ hates snapbuilders, this is a matter of the intention of the company producing the models. Anything else is disingenuous because you could call a dumpster fire released 30 years ago "good" because you're able to take extra steps to fix it and then call a modern day RG full of masterful engineering that could be put together by a beginner and still look and function great "good" as well, despite the fact that they are not equal in any way.
Stop pretending there are no bad model kits. There are bad and good model kits, just like there is bad and good of everything else in the world despite any form of art or media being capable of editing/restoring/fixing. There is just what level of good and bad any one of us is willing to tolerate. You can make fun of me for being lazy and not fixing joints, that's fine and justified because it's true, I'm lazy, but my point is not about effort. It's about what a product is advertised to be and do. In fact I'd go as far as to say Bandai should be more like Kotobukiya and include a frame of the unpainted/detailed version of every model on their box, in the effort of being objective about advertised quality.

Anonymous

Anonymous Mon 24 Jan 2022 21:54:28 No.9576979 Report

Quoted By:

>>9576737
>pedo
That word doesn't mean what you think it means, tumblr.

Anonymous

Anonymous Mon 24 Jan 2022 22:22:18 No.9577012 Report

Quoted By: >>9577252

>>9576977
Looking at the reply chain, absolutely none of this actually explains why the RG RX-78-2 is a "bad model kit" for sometimes requiring joint tightening.

Anonymous

Anonymous Tue 25 Jan 2022 00:42:54 No.9577252 Report

Quoted By: >>9577264 >>9577300 >>9577327 >>9577996

>>9577012
>absolutely none of this actually explains why the RG RX-78-2 is a "bad model kit"
It does so quite plainly, you need to work on reading comprehension.

>for sometimes requiring joint tightening.
See this is the disingenuous shill nonsense that makes most people not want to bother explaining shit to you, but then again that's probably what you prefer. No challenge to your awful opinions.
They don't "sometimes require tightening" they are uniformly awful. Everyone has always known the old pre-assembled frames are garbage and that's why Bandai stopped using them altogether. I have no idea why this discourse has to happen in every single general.
You're the one who can't explain why it's a "good model kit" just because you don't mind fixing Bandai's mistakes. You can enjoy any model kit in the world that you want to enjoy, nobody cares and no one will stop you. But whether a kit is good or bad does not depend on the skill level of the person working on it or how much they're willing to do. Give someone with enough skill a bunch of throwaway plastic and they can make a perfect model kit. Unrealistic, yes, but when you're basing model kit quality on a hypothetical skill ceiling you're just throwing away any notion of good or bad and if that's your goal you need to grow up because quality exists in everything.

Anonymous

View Same Google ImgOps iqdb SauceNAO tips fedora.jpg, 6KiB, 224x225

Anonymous Tue 25 Jan 2022 00:49:33 No.9577264 Report

Quoted By: >>9577606

>>9576977
>>9577252
>samefag defends his own pretentious nonsense
>more news at 11

Anonymous

Anonymous Tue 25 Jan 2022 01:14:07 No.9577300 Report

Quoted By: >>9577606

>>9577252
>It does so quite plainly
It does not.

Anonymous

Anonymous Tue 25 Jan 2022 01:40:34 No.9577327 Report

Quoted By: >>9577606

>>9577252
>They don't "sometimes require tightening" they are uniformly awful.
works on my machine™

Anonymous

View Same Google ImgOps iqdb SauceNAO rg-hi-nu-gundam-titanium-special.jpg, 824KiB, 1200x1200

Anonymous Tue 25 Jan 2022 01:54:30 No.9577350 Report

Quoted By: >>9577449 >>9577763 >>9577839

Hi friends, was wondering if theres anywhere i can PO this kit, ive made a few HGs and some anon posted this in a thread elsewhere. I know its gundam base exclusive so im not sure if theres a way i can grab it without going aftermarket

Anonymous

Anonymous Tue 25 Jan 2022 02:56:18 No.9577449 Report

Quoted By: >>9577526

>>9577350
learn how to paint
travel to japan
pay scalped prices

Anonymous

Anonymous Tue 25 Jan 2022 04:19:17 No.9577526 Report

Quoted By:

>>9577449
scalper prices it is, ty anon

Anonymous

Anonymous Tue 25 Jan 2022 04:38:37 No.9577549 Report

Quoted By: >>9577573 >>9577608

I just want a trip to Japan or Korea or SEA or wherever the fuck and come back with a suitcase full of gunpla I'm sick of waiting for restocks and preorders instead of just browsing brick&mortar shops I know have shit in stock overseas.

Anonymous

Anonymous Tue 25 Jan 2022 05:00:31 No.9577573 Report

Quoted By:

>>9577549
Youll spend $1,000 in flight tickets just to find out the shops are sold out there or have marked up prices that you may as well buy online and ship it. Only good and sure thing is the gundam base but hard to say what they have in rotation at any given time.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1364359029318.jpg, 67KiB, 1016x768

Anonymous Tue 25 Jan 2022 05:36:33 No.9577606 Report

Quoted By: >>9577711

>>9577264
You don't know what pretentious means, you don't know what samefag means, and you are clearly extremely upset about someone calling you a hipster in the past and simply want to use a fedora image regardless of context or meaning. Stay mad.

>>9577300
>>9577327
Hope Bandai sees this bro.

Anonymous

View Same Google ImgOps iqdb SauceNAO dfg1.jpg, 31KiB, 600x600

Anonymous Tue 25 Jan 2022 05:36:51 No.9577608 Report

Quoted By:

>>9577549
>laughing at poor sods while I'm being surrounded by loads of different Daban MGs.

Anonymous

Anonymous Tue 25 Jan 2022 06:54:13 No.9577663 Report

Quoted By: >>9577700

>>9576162
This, why the fuck haven't they made more clone wars era related kits.

Anonymous

Anonymous Tue 25 Jan 2022 07:38:39 No.9577700 Report

Quoted By:

>>9577663
Disney would rather them make kits that tie into brand new stuff like the mandaloran

Anonymous

View Same Google ImgOps iqdb SauceNAO dusty fedora.jpg, 91KiB, 1200x675

Anonymous Tue 25 Jan 2022 07:50:07 No.9577711 Report

Quoted By: >>9578281

>>9577606
>pretentious faglord continues to argue his worthless point
>sounds even more pretentious
please, go on

Anonymous

Anonymous Tue 25 Jan 2022 08:52:28 No.9577763 Report

Quoted By:

>>9577350
you can watch out for it on https://sidesevenexports.com/collections/rg

Anonymous

Anonymous Tue 25 Jan 2022 08:56:50 No.9577764 Report

Quoted By: >>9577934

Is there any conversion kits to make the MG Exia into the Astrea, or at least just to build the head for it?

Anonymous

Anonymous Tue 25 Jan 2022 10:38:23 No.9577839 Report

Quoted By:

>>9577350
just get the regular version and slap a gloss topcoat on it

Anonymous

Anonymous Tue 25 Jan 2022 11:23:02 No.9577883 Report

Quoted By:

Getting my first model kit this week, it's not Gunpla, but Flame Toys, been watching that one guy I.R.O. for some tips, and I'm thinking of maybe hand painting my model kit (of course using primer from a can first).
Any one else I should consider watching ahead of time?

Anonymous

Anonymous Tue 25 Jan 2022 11:51:15 No.9577903 Report

Quoted By: >>9577957

Still relatively new to gunpla and painting.
What's the general opinion on using MR Color GX100 over Enamel paints? (Revell to be specific) It seems to go on fine and doesn't degrade the paint underneath, but it's extremely bumpy.

Anonymous

View Same Google ImgOps iqdb SauceNAO ddb7fdd66a4a8da4cdfbf0c0ee1be1b3.jpg, 122KiB, 932x932

Anonymous Tue 25 Jan 2022 12:33:36 No.9577934 Report

Quoted By:

>>9577764
You're actually better off buying a Daban Astrea and using the Astrea parts on your Bandai Exia

Gelgoog Guy !!XOac6frt+Ny

Gelgoog Guy !!XOac6frt+Ny Tue 25 Jan 2022 13:18:27 No.9577957 Report

Quoted By: >>9577960

>>9577903
As long as the paint is dried you should have no issue. However if the gloss coat feels bumpy that's an either an issue with your spraying or the base layer it's covering.

Anonymous

View Same Google ImgOps iqdb SauceNAO 53BNdJwE-nuwduLONH9G-nfFUIk0ARlu (...).jpg, 306KiB, 1536x2048

Anonymous Tue 25 Jan 2022 13:20:02 No.9577958 Report

Quoted By: >>9579841

It's never getting a release date is it....

Anonymous

Anonymous Tue 25 Jan 2022 13:23:03 No.9577960 Report

Quoted By: >>9577961 >>9578008

>>9577957
cool cheers. My thinning ratio might be the cause? I'm generally using a 50/50 of gx100 and mr color thinner so maybe increase the thinning? I've used 3 coats previously on my Ingram figure but perhaps that's too much for the thinning ratio?

Gelgoog Guy !!XOac6frt+Ny

Gelgoog Guy !!XOac6frt+Ny Tue 25 Jan 2022 13:25:08 No.9577961 Report

Quoted By: >>9577965

>>9577960
In my experience bumpy is a pressure issue, either too low or too high.

Anonymous

View Same Google ImgOps iqdb SauceNAO N2464714001001_003.jpg, 243KiB, 1200x1200

Anonymous Tue 25 Jan 2022 13:28:35 No.9577964 Report

Quoted By: >>9577993

For those who have built the MKV MG

Does the white part on the back of the helmet (see pic) supposed to move around?

I clip the thing in, while it is not falling off but you can move it around and if you pull on it, you can see the clear part under it. Is is normal or did I break some tiny clip in the white square thing when I pushed the part in??

Anonymous

Anonymous Tue 25 Jan 2022 13:29:06 No.9577965 Report

Quoted By: >>9577971

>>9577961
Ah ok, i've definitely had it on full pressure as i wasn't aware it was an issue. I'll adjust for the future, thanks.

Gelgoog Guy !!XOac6frt+Ny

Gelgoog Guy !!XOac6frt+Ny Tue 25 Jan 2022 13:31:57 No.9577971 Report

Quoted By:

>>9577965
No problem. I don't remember what PSI I used to use for gloss coat, but if it's well thinned it wasn't super high. Hell unless you're running really thick paint you shouldn't have to go very high in general.

Anonymous

Anonymous Tue 25 Jan 2022 14:12:07 No.9577993 Report

Quoted By:

>>9577964
I think you cut too much and it doesnt fit properly tight anymore

Anonymous

View Same Google ImgOps iqdb SauceNAO 1620997066235.jpg, 200KiB, 1280x720

Anonymous Tue 25 Jan 2022 14:13:18 No.9577996 Report

Quoted By: >>9586290

>>9574373
>>9576977
>>9577252
the absolute vitriol and mental gymnastic in these posts that try convince everyone that their model kits that work fine are actually bad and horrible because this hamhanded nuisance personally had a bad experience

Anonymous

View Same Google ImgOps iqdb SauceNAO paint pyramid.jpg, 464KiB, 1200x795

Anonymous Tue 25 Jan 2022 14:26:12 No.9578008 Report

Quoted By: >>9578061

>>9577960
>I'm generally using a 50/50 of gx100
GX series is thicker, you need to use at least 2:1 thinner to paint ratio.

Anonymous

Anonymous Tue 25 Jan 2022 15:19:30 No.9578061 Report

Quoted By:

>>9578008
that makes sense

Anonymous

Anonymous Tue 25 Jan 2022 18:05:50 No.9578281 Report

Quoted By: >>9578292

>>9577711
You are really butthurt about the fedoras that got posted at you weeks ago lmfao

Anonymous

Anonymous Tue 25 Jan 2022 18:11:00 No.9578292 Report

Quoted By: >>9578310

>>9578281
>after all that pseudo-intellectual babble this is all he could come back with
pretty pathetic ngl

Anonymous

View Same Google ImgOps iqdb SauceNAO 1613067981027.gif, 126KiB, 181x191

Anonymous Tue 25 Jan 2022 18:20:59 No.9578310 Report

Quoted By: >>9578377

>>9578292
I'm not even that anon I just think it's hilarious seeing you this mindbroken over fedora pictures.

Anonymous

Anonymous Tue 25 Jan 2022 18:43:07 No.9578342 Report

Quoted By: >>9578377

>replying to common mainstream opinions with fedoras
>"pretentious"
>"pseudo-intellectual"
Is this a new character or larp or something?

Anonymous

View Same Google ImgOps iqdb SauceNAO something for your pain.jpg, 2MiB, 2400x2400

Anonymous Tue 25 Jan 2022 19:07:14 No.9578377 Report

Quoted By:

>>9578310
>>9578342
that anus of yours could really use some ointment

Anonymous

Anonymous Tue 25 Jan 2022 19:09:23 No.9578380 Report

Quoted By:

This fucking thread man. Jannies, do your job

Anonymous

Anonymous Tue 25 Jan 2022 19:37:53 No.9578432 Report

Quoted By: >>9578481

>>9574196
Hey are Gunpla Markers official Bandai paint shades? Like if I want to touch up a Kamen Rider belt, I can use them and guarantee they'll match?

Anonymous

Anonymous Tue 25 Jan 2022 19:56:23 No.9578481 Report

Quoted By: >>9579106

>>9578432
Nope, far from it. Gundam Markers are made by a 3rd party, GSI Creos just that they are licensed by Bandai Hobby and Sunrise. Bandai Hobby also operates separately from Bandai Toys almost as if they are separate companies. There is also matter of how industrial toy paint uses different and stronger chemicals than consumer, hobby paint. It just doesn't work the way you described.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1620194118223.jpg, 651KiB, 843x1500

Anonymous Tue 25 Jan 2022 21:19:52 No.9578661 Report

Quoted By: >>9578666 >>9578693 >>9579032

Any other Gundam girls, Gundam-esque girls, mecha-girls worth picking up?

Anonymous

Anonymous Tue 25 Jan 2022 21:21:18 No.9578666 Report

Quoted By: >>9578678

>>9578661
no

Anonymous

Anonymous Tue 25 Jan 2022 21:25:15 No.9578678 Report

Quoted By:

>>9578666
Grim

Anonymous

Anonymous Tue 25 Jan 2022 21:32:28 No.9578693 Report

Quoted By: >>9578717

>>9578661
Try >>9569752

Anonymous

View Same Google ImgOps iqdb SauceNAO 911yLd3WgQL._AC_SL1500_.jpg, 329KiB, 1500x1127

Anonymous Tue 25 Jan 2022 21:35:47 No.9578698 Report

Quoted By:

This is one of the better model kits I've bought, honestly. Not too hard to build, getting the treads together is a bit tricky though. It's rare to get a functional kit even if pulling it apart to rearrange the builds is a bit of a hassle.

Anonymous

Anonymous Tue 25 Jan 2022 21:41:43 No.9578717 Report

Quoted By:

>>9578693
Sick, I'll have a gander. Thanks anon.

Anonymous

View Same Google ImgOps iqdb SauceNAO 121355004_3332638513494773_62532 (...).jpg, 296KiB, 1100x734

Anonymous Tue 25 Jan 2022 23:45:30 No.9579032 Report

Quoted By: >>9580531 >>9581858

>>9578661
THE Fumina Hoshino kit

Anonymous

Anonymous Tue 25 Jan 2022 23:58:35 No.9579064 Report

Quoted By: >>9579078 >>9579095

Let's say for argument's sake I want to get into resin but I have zero interest in sanding, wet or otherwise (I have a recurring repetitive stress injury in my hands and that sort of motion makes it flare up). Can I get by just chopping/shaving the nubs and flash with a hobby knife and/or very powerful nippers?

Secondly, is there anything else I really need to know? After parts are trimmed, can I just pop/glue them into place, paint, topcoat, and call it a day? Or is there anything I'm missing here?

Anonymous

View Same Google ImgOps iqdb SauceNAO 1390184498902.jpg, 57KiB, 960x720

Anonymous Tue 25 Jan 2022 23:59:48 No.9579066 Report

Quoted By:

>9578377

Anonymous

View Same Google ImgOps iqdb SauceNAO wu3zofcdx5c81.jpg, 39KiB, 640x640

Anonymous Wed 26 Jan 2022 00:04:41 No.9579078 Report

Quoted By:

>>9579064
it always depends on the kit, there are 3d printed plastic statues that don't need sanding or what not, just painting

and then there's resin kits that really need a lot of work to make it real good

Anonymous

View Same Google ImgOps iqdb SauceNAO nipako_wip.jpg, 487KiB, 2180x1600

Anonymous Wed 26 Jan 2022 00:22:28 No.9579095 Report

Quoted By: >>9579110 >>9579371

>>9579064
>Can I get by just chopping/shaving the nubs and flash with a hobby knife and/or very powerful nippers?
Generally speaking, no.
Even the kits that come as a single piece would still have a pour channel and it wouldn't be trimmed cleanly. What's more, the resin is rarely 100% free of molding defects so you are expected to drill out and fill in bubbles, clean flash and things like that.

Anonymous

Anonymous Wed 26 Jan 2022 00:28:41 No.9579106 Report

Quoted By:

>>9578481
>It just doesn't work the way you described.
So paint matching is impossible with them and nothing remotely looks right to any company's color?

Anonymous

Anonymous Wed 26 Jan 2022 00:29:28 No.9579110 Report

Quoted By: >>9579120 >>9579363

>>9579095
What did you do to clean the mold lines of that hand?

Anonymous

View Same Google ImgOps iqdb SauceNAO essential chisels.jpg, 353KiB, 1600x770

Anonymous Wed 26 Jan 2022 00:35:43 No.9579120 Report

Quoted By:

>>9579110
>What did you do to clean the mold lines of that hand?
Spent an evening with a BMC chisel in my hand.

Anonymous

View Same Google ImgOps iqdb SauceNAO 256.400_4-480x480.jpg, 12KiB, 480x480

Anonymous Wed 26 Jan 2022 02:43:55 No.9579363 Report

Quoted By: >>9579367 >>9579519

>>9579110
use knife to scrape of large parts then use a pen sander to sand it down quickly

Anonymous

Anonymous Wed 26 Jan 2022 02:46:38 No.9579367 Report

Quoted By:

>>9579363
>using power tools on something this tiny
You must like extra work.

Anonymous

Anonymous Wed 26 Jan 2022 02:49:00 No.9579371 Report

Quoted By:

>>9579095
Cute Nipako

Anonymous

Anonymous Wed 26 Jan 2022 03:45:54 No.9579474 Report

Quoted By: >>9579528

give it to me straight, anons. we're not getting modern xabungle kits, are we? the SMP is pretty rough and that's been it for like 20 years

Anonymous

View Same Google ImgOps iqdb SauceNAO Apu America.png, 387KiB, 630x472

Anonymous Wed 26 Jan 2022 03:48:40 No.9579481 Report

Quoted By:

I'm going to buy American Gundam and feel great great doing it. He looks fun.

Anonymous

View Same Google ImgOps iqdb SauceNAO Apu America.png, 387KiB, 630x472

Anonymous Wed 26 Jan 2022 03:50:48 No.9579488 Report

Quoted By:

I'm going to buy American Gundam and feel great doing it. He looks fun.

Anonymous

Anonymous Wed 26 Jan 2022 04:08:31 No.9579519 Report

Quoted By:

>>9579363
>use knife to scrape of large parts
I'm guessing you've never worked with resin. Unless you mean the kitchen knife.

Anonymous

Anonymous Wed 26 Jan 2022 04:12:06 No.9579528 Report

Quoted By:

>>9579474
Does it absolutely have to be a kit? Hi-Metal R released a few very nice looking Xabungle figs. And yeah, I know it's not the same, but when you're desperate and your franchise is obscure, beggars can't really be choosers, ya dig?

Anonymous

View Same Google ImgOps iqdb SauceNAO E_pA7ALUYAAH30W.jpg, 328KiB, 1536x2048

Anonymous Wed 26 Jan 2022 07:04:02 No.9579820 Report

Quoted By: >>9579822

bros
just look at how much skill is displayed in this picture
this is scribing and customization on a cheap ass HG barbie leg

Anonymous

View Same Google ImgOps iqdb SauceNAO FJhXhX-UcAAusMj.jpg, 345KiB, 1536x2048

Anonymous Wed 26 Jan 2022 07:05:05 No.9579822 Report

Quoted By: >>9579835 >>9579847

>>9579820
god i wish i had even an inkling of how to get thsi good
just even knowing what lines draw

Anonymous

View Same Google ImgOps iqdb SauceNAO americanpsycho.png, 126KiB, 400x248

Anonymous Wed 26 Jan 2022 07:17:23 No.9579835 Report

Quoted By:

>>9579822
Look at that subtle off-white coloring. The tasteful thickness of it.

Anonymous

View Same Google ImgOps iqdb SauceNAO gup_wip4.jpg, 944KiB, 1600x1957

Anonymous Wed 26 Jan 2022 07:20:39 No.9579840 Report

Quoted By: >>9580406 >>9580583 >>9581669

Somehow a project doesn't feel complete unless there is some scratchbuilding in it. Also Tamiya "For Plastic" files are just the best.

Post WIPs.

Anonymous

Anonymous Wed 26 Jan 2022 07:21:32 No.9579841 Report

Quoted By:

>>9577958
im still waiting on those overly designed mecha ninja turtles.
i still dont even know if those are actual model kits or not even though they have been listed as them

Anonymous

Anonymous Wed 26 Jan 2022 07:24:21 No.9579847 Report

Quoted By: >>9579851

>>9579822
>just even knowing what lines draw
just take a profile picture of the part you want to scribe, take it into a picture editor like photoshop and just mess around with various designs.

Anonymous

View Same Google ImgOps iqdb SauceNAO Screenshot_20220126_022702.png, 553KiB, 954x966

Anonymous Wed 26 Jan 2022 07:29:05 No.9579851 Report

Quoted By: >>9579947

>>9579847
ive been trying that but my brain doesnt work right and I cant figure out what lines to put down at all. Idunno man i think I cant picture what to do with 3d surfaces.

Anonymous

View Same Google ImgOps iqdb SauceNAO Op_satsuki.jpg, 75KiB, 632x754

Anonymous Wed 26 Jan 2022 08:47:22 No.9579914 Report

Quoted By: >>9585990

What mobile suit would she pilot?

Anonymous

Anonymous Wed 26 Jan 2022 09:12:46 No.9579947 Report

Quoted By:

>>9579851
Don't "try" to create. Just make marks. Scribble to start with, or just make lines over and over at different angles. Then turn that layer partially transparent, start a new layer, and try to see patterns in the mess. Pull a line out here, there, and soon you might have something interesting. Every time you draw a new line, create a new layer, so you eventually have a whole assortment of layers to mix and match.

Anonymous

Anonymous Wed 26 Jan 2022 17:27:56 No.9580406 Report

Quoted By: >>9580458

>>9579840
What exactly is so good about it

Anonymous

Anonymous Wed 26 Jan 2022 17:55:38 No.9580458 Report

Quoted By:

>>9580406
Removes a good bit of material per stroke, on par with coarse files, yet doesn't leave deep ugly scratches. If you always file in the same direction (lengthwise) there are almost no scratches at all. Produces relatively large shavings that don't fly into the air. Doesn't clog, very easy to clean.

Anonymous

Anonymous Wed 26 Jan 2022 18:32:51 No.9580531 Report

Quoted By: >>9580600 >>9581567

>>9579032
I've been told Fumino kits are dreadful

Anonymous

View Same Google ImgOps iqdb SauceNAO duster1.jpg, 726KiB, 1600x1876

Anonymous Wed 26 Jan 2022 18:48:28 No.9580583 Report

Quoted By: >>9580599

>>9579840
And just in time for all the filing and sanding this arrived.

Anonymous

View Same Google ImgOps iqdb SauceNAO duster2.jpg, 480KiB, 1500x1600

Anonymous Wed 26 Jan 2022 18:53:50 No.9580599 Report

Quoted By: >>9580630

>>9580583
The hose is pretty long which is nice.
LED connection is not very obvious. LEDs are not super bright but serviceable.
The suction is not super strong but enough to suck in the airborne dust. The noise level is similar to a portable vacuum.

Will have a better idea about the performance after I try it out tonight.

Anonymous

Anonymous Wed 26 Jan 2022 18:53:57 No.9580600 Report

Quoted By:

>>9580531
The original one and the molds based on it are. The figurerise kits are okay for the most part.

Anonymous

Anonymous Wed 26 Jan 2022 19:09:20 No.9580630 Report

Quoted By:

>>9580599
imagine if it sucked your cock hahaha....

Anonymous

View Same Google ImgOps iqdb SauceNAO 126533new.jpg, 48KiB, 1400x627

Anonymous Wed 26 Jan 2022 21:52:25 No.9580957 Report

Quoted By:

Anybody here owns pic related? If so, opinions?

Anonymous

Anonymous Thu 27 Jan 2022 01:41:09 No.9581279 Report

Quoted By:

Has anyone ever built the MG F90 Unit 2 kit? I kinda like how that looks, and wondered how it is as a kit

Anonymous

View Same Google ImgOps iqdb SauceNAO EmOZnHEVgAA6HRZ.jpg, 144KiB, 675x1200

Anonymous Thu 27 Jan 2022 05:49:45 No.9581567 Report

Quoted By: >>9581633 >>9582253

>>9580531
The newest Fumina Hoshino kit is awesome. that's why its every reprint gets sold out in hours.

Anonymous

View Same Google ImgOps iqdb SauceNAO garunteed replies.jpg, 96KiB, 695x927

Anonymous Thu 27 Jan 2022 07:02:00 No.9581633 Report

Quoted By: >>9581642 >>9581650 >>9581656 >>9589279

>>9581567
remember to mod yours

Anonymous

View Same Google ImgOps iqdb SauceNAO 1643178851310.png, 523KiB, 955x953

Anonymous Thu 27 Jan 2022 07:09:15 No.9581642 Report

Quoted By: >>9581643 >>9581646

>>9581633
>Femboy mod

Anonymous

Anonymous Thu 27 Jan 2022 07:09:42 No.9581643 Report

Quoted By: >>9581682

>>9581642
>furfag complaining about femboys
rofl

Anonymous

Anonymous Thu 27 Jan 2022 07:10:40 No.9581646 Report

Quoted By:

>>9581642
god i wish I could fuck an eevee

Anonymous

Anonymous Thu 27 Jan 2022 07:14:11 No.9581650 Report

Quoted By:

>>9581633
BASED

Anonymous

View Same Google ImgOps iqdb SauceNAO 5144.jpg, 56KiB, 500x800

Anonymous Thu 27 Jan 2022 07:22:49 No.9581656 Report

Quoted By: >>9581874 >>9582887

>>9581633
don't worry, I'm thinking of making bigger boobs and puffy vulva mods

Anonymous

Anonymous Thu 27 Jan 2022 07:43:28 No.9581669 Report

Quoted By:

>>9579840
>Using sticky tack to remove plastic dust from the file.
Well, that's a pretty neat idea.

Anonymous

Anonymous Thu 27 Jan 2022 08:04:17 No.9581682 Report

Quoted By:

>>9581643
That's a pokemon and I use every reaction pic I can get you cunt.

Anonymous

Anonymous Thu 27 Jan 2022 13:00:57 No.9581846 Report

Quoted By: >>9581849 >>9581897

The cheapo kmart sidecutters I've been using to cut parts from sprues for like 15 years are finally starting to get so rusty they struggle to re-open after a cut.

Anonymous

Anonymous Thu 27 Jan 2022 13:04:41 No.9581849 Report

Quoted By: >>9581876

>>9581846
Search for "gundam model kit" or "gundam tool kit" on Amazon. Boxes loaded with tools. They almost always have x-acto knives with blades, small drill bits, cutters, rulers, screwdrivers, files, etc, for a fraction you'd pay for separate items. Prices & exact parts vary, larger kits tend to be loaded with more but even the basic kits are good enough for just their tools.

Most come with a battery-operated nail shaper(cheapo dremel), some of the pricier kits have a slightly better plug-in tool with more bits.

Anonymous

Anonymous Thu 27 Jan 2022 13:10:03 No.9581858 Report

Quoted By:

>>9579032
The Class Prez Bearguy kit was such a letdown.

Anonymous

Anonymous Thu 27 Jan 2022 13:32:45 No.9581874 Report

Quoted By: >>9581980

>>9581656
on what planet does that tubular waist look good?

Anonymous

Anonymous Thu 27 Jan 2022 13:34:44 No.9581876 Report

Quoted By: >>9581903

>>9581849
nah, don't buy those.
pot metal chinesium garbage that you'll immediately want to replace.

Anonymous

Anonymous Thu 27 Jan 2022 13:52:43 No.9581897 Report

Quoted By:

>>9581846
Buy the same regular sidecutters if you can't be bothered to oil it after use.

Anonymous

Anonymous Thu 27 Jan 2022 13:59:04 No.9581903 Report

Quoted By: >>9582024

>>9581876
Stop lying. I've had no problems with any of those kits.

Anonymous

Anonymous Thu 27 Jan 2022 14:58:42 No.9581980 Report

Quoted By: >>9582529

>>9581874
Probably some pedo planet

Anonymous

Anonymous Thu 27 Jan 2022 15:28:57 No.9582024 Report

Quoted By: >>9582039 >>9582336

>>9581903
if you've never used decent tools, ofc you won't know better

Anonymous

Anonymous Thu 27 Jan 2022 15:40:48 No.9582039 Report

Quoted By: >>9582382

>>9582024
>he overpays for meme tools

Anonymous

Anonymous Thu 27 Jan 2022 18:07:49 No.9582253 Report

Quoted By:

>>9581567
Huh, noted.

Anonymous

View Same Google ImgOps iqdb SauceNAO 56b9af46-0dc0-4ee8-b311-324742d7 (...).jpg, 45KiB, 636x750

Anonymous Thu 27 Jan 2022 18:41:46 No.9582327 Report

Quoted By: >>9582358

Is the MG F90 unit 2 kit any good?

Anonymous

Anonymous Thu 27 Jan 2022 18:46:13 No.9582336 Report

Quoted By: >>9582382 >>9582480 >>9582519

>>9582024
I get decent tools in those kits. Stop being a little bitch who wastes money on "name brands", which are often the same no-name tools bought in bulk & sold at a markup. The same practice that a lot of companies do anymore.

Anonymous

Anonymous Thu 27 Jan 2022 19:02:55 No.9582358 Report

Quoted By: >>9582534

>>9582327
it's the f90 in purple, so it probably is

Anonymous

Anonymous Thu 27 Jan 2022 19:19:37 No.9582382 Report

Quoted By:

>>9582039
>>9582336
>poorfags in denial over not being able to shell out $40 for a decent set of tools

Anonymous

Anonymous Thu 27 Jan 2022 20:32:08 No.9582480 Report

Quoted By:

>>9582336
he's right though. stop trying to rationalize your poverty or perceived muh capitalism red pill.

Anonymous

Anonymous Thu 27 Jan 2022 20:50:52 No.9582519 Report

Quoted By: >>9582561

>>9582336
you don't even need to buy name brands. some $12 chinkshit single blade nippers will blow any nippers you get in those kits out of the water

Anonymous

Anonymous Thu 27 Jan 2022 20:53:20 No.9582529 Report

Quoted By:

>>9581980
Why are you obsessed with pedophilia?

Anonymous

Anonymous Thu 27 Jan 2022 20:55:52 No.9582534 Report

Quoted By: >>9582561 >>9582854

>>9582358
nta but I never hear people talk about the f90 kits in general. How are they? They look really nice but I've never built one.

Anonymous

Anonymous Thu 27 Jan 2022 21:03:56 No.9582561 Report

Quoted By:

>>9582519
the biggest thing is to just avoid the nippers made of stamped steel, as their tolerances are shite
>>9582534
they're really good, but you really don't see people talking about any P-Bandai exclusive kits long term.

Anonymous

Anonymous Thu 27 Jan 2022 21:21:03 No.9582601 Report

Quoted By:

my first plamo dedicated tool kit was the mineshima a-2. used those for probably a good three years or so. then i upgraded my nippers to an mid-22, then a d-25. used the d-25 for a good 9 or so years.

now i use the tandem of a pro-zetsu nipper and spn-120.

those plato nippers from the 10 dollar kits from amazon / ebay are garbage. the only really good thing to come out of those are the ruler, files, cutting mat and case. the nail file thing is near useless, the tweezers have shitty tips, the sanding sticks are too fat for more delicate work and i've just never been a fan of the x-acto style hobby knives.

Anonymous

Anonymous Thu 27 Jan 2022 23:15:53 No.9582826 Report

Quoted By:

I preordered the Moderoid Zeorymer.

How's the Granzort ones? I loved that anime.

Anonymous

View Same Google ImgOps iqdb SauceNAO 20181025_v2_assa_buster_02.jpg, 253KiB, 800x1421

Anonymous Thu 27 Jan 2022 23:32:17 No.9582854 Report

Quoted By: >>9582866 >>9583807

>>9582534
its a fucking P-Bandai. all of F90 are P-Bandai. Its fucking hard to get unless youre a nip.

pic related, I have been trying for years to get one of my favorite gundam ever

Anonymous

Anonymous Thu 27 Jan 2022 23:38:12 No.9582866 Report

Quoted By:

>>9582854
>It's fucking hard to get if you're a complete fuckin dumbass, a real moron, just a total goddamn idiot who's on the internet for the first time

Anonymous

Anonymous Thu 27 Jan 2022 23:49:16 No.9582887 Report

Quoted By:

>>9581656
Magnificent.

Anonymous

View Same Google ImgOps iqdb SauceNAO fdejx9awdq151.png, 461KiB, 680x383

Anonymous Fri 28 Jan 2022 00:41:24 No.9583021 Report

Quoted By: >>9583099 >>9583185 >>9583398

Been Almost 10 years, we aint never getting an MG are we

Anonymous

View Same Google ImgOps iqdb SauceNAO jestareact.jpg, 34KiB, 600x315

Anonymous Fri 28 Jan 2022 01:04:25 No.9583099 Report

Quoted By:

>>9583021
did you make that anon? either way, its going in my collection

Anonymous

Anonymous Fri 28 Jan 2022 01:41:51 No.9583185 Report

Quoted By: >>9583283

>>9583021
you never know
Baund Doc finally got a HG in 2020, maybe in another 10 years they will finally give us the MG G-Self

Anonymous

Anonymous Fri 28 Jan 2022 02:27:35 No.9583283 Report

Quoted By:

>>9583185
The wait will have been worth it IMO if they give it the full LED treatment like the MGEX Unicorn

Anonymous

View Same Google ImgOps iqdb SauceNAO 538.jpg, 110KiB, 600x800

Anonymous Fri 28 Jan 2022 03:30:11 No.9583398 Report

Quoted By: >>9583945 >>9587641

>>9583021
Blame it on Tomino, he made sure that the G-Self design is so retarded and unfeasible that its basically un-MG-eable or un-PG-eable

Anonymous

Anonymous Fri 28 Jan 2022 09:21:22 No.9583807 Report

Quoted By: >>9583815 >>9583905

>>9582854
>Its fucking hard to get unless youre a nip.
*or American

Anonymous

Anonymous Fri 28 Jan 2022 09:33:49 No.9583815 Report

Quoted By: >>9584793

>>9583807
>p-bandai operated in Canada through bluefin/Amazon for 7 or 8 years
>even was able to get the mail in bonus shit
>go to preorder the Mk-V MG
>sorry we don't service your country as of 3 months from now when this releases lol
Why did they do this to us? We still buy things, there are still PB resellers here.

Anonymous

View Same Google ImgOps iqdb SauceNAO d.png, 821KiB, 1649x881

Anonymous Fri 28 Jan 2022 11:27:15 No.9583905 Report

Quoted By: >>9583909 >>9583910 >>9583954 >>9584237 >>9585137

>>9583807
oh fucking tell me, P-Bandai is the worst idea Bandai made yet, among many others.

>finally get a official P-Bandai support in country. no need to pay for scalper prices
>fucking bare bones of a fucking store

Anonymous

Anonymous Fri 28 Jan 2022 11:31:10 No.9583909 Report

Quoted By:

>>9583905
Flip store? Yeah, they only do the pre-orders instead of actually stocking stuff. Like, you know, a store would? It's so weird.

Anonymous

Anonymous Fri 28 Jan 2022 11:31:40 No.9583910 Report

Quoted By:

>>9583905
yeah but now you can buy $800 gundam coats

Anonymous

Anonymous Fri 28 Jan 2022 12:13:36 No.9583945 Report

Quoted By: >>9585244 >>9585250 >>9585272

>>9583398
Is that because of how round the armor tends to be?

Anonymous

Anonymous Fri 28 Jan 2022 12:28:41 No.9583954 Report

Quoted By: >>9584986

>>9583905
Why Flip and Malaysian bros rely so much on Shopee?

Anonymous

View Same Google ImgOps iqdb SauceNAO rsmodels.jpg, 673KiB, 1200x1900

Anonymous Fri 28 Jan 2022 15:33:36 No.9584141 Report

Quoted By:

If there is one thing I am thankful to Corona-chan for, it's teaching me to buy obscure kits directly from their obscure manufacturers (and saving money in the process).

Anonymous

Anonymous Fri 28 Jan 2022 16:30:57 No.9584237 Report

Quoted By:

>>9583905
If you're buying through shopee, you didn't get your own store lmao
shopee is just a post forwarder

Anonymous

View Same Google ImgOps iqdb SauceNAO IMG_20220128_082456.jpg, 325KiB, 694x925

Anonymous Fri 28 Jan 2022 17:14:02 No.9584316 Report

Quoted By: >>9584344

The following kits are available for the following prices.
>RG Sazabi: 45
>Aura Battler Dunbine:30
>One Piece Moby Dick:13
>MG Turn X : 50
>1/60 MAZINGER Z (MAZINGER Z INFINITY VER.): 120
>PBandai Shenlong Liaoya unit MG: 60
>Kotobukiya Tamotu: 23
>Knight's & Magic Moderoid Ikaruga:65
>Spircle Striker Mugen Seijuro Kamiyama type:30
>Spircle Striker Mugen Claris type:30
>Frame arms Durga I: REbuild:40
>Ultraman Suit 7.5: 35
>Drift Transformer:45
>BB Neo Zeong: 15
>Riesen Panzer IV: 30
>Crossbone RG: 25
>AT-ST:25
>Pbandai Regelgu HG: 40
>Galbady Rebake HG:20
>Eldora Brute HG: 17
>Phantasy star online 2 AIS: 35
>Diver ayame: 20
>Kotobukiya "Usa Gear": 55
>Moderoid Ariel: 50
>Classic Of Mountains And Seas Blue Dragon: 70
>Hexa gear alternative sneak: 10
>Hexa gear para pawn lat mirror 1.5: 25
>Hexa gear light armor type: rose 1.5: 25
>Hexa gear early governor vol 2 x3: 25
>Hexa gear booster pack 001: 15
>MSG heavy weapon 17: 12
>MSG heavy weapon 16:10
>MSG convert body: 25
>Sky High Wings: 10
>30MM Option Weapon 1 :10
>Action base: 6
>Action base 2: 10
>MSG 05: 10
>MSG 16:10
>MSG 10:7
>MSG Guitar Ax: 10

Anonymous

Anonymous Fri 28 Jan 2022 17:29:09 No.9584344 Report

Quoted By: >>9584356 >>9584407

>>9584316
You forgot to add your email.

Anonymous

Anonymous Fri 28 Jan 2022 17:33:36 No.9584356 Report

Quoted By:

>>9584344
and you business registration number for tax purposes :^)

[email protected]

[email protected] Fri 28 Jan 2022 18:02:34 No.9584407 Report

Quoted By:

>>9584344
This one.

Anonymous

Anonymous Fri 28 Jan 2022 21:06:43 No.9584736 Report

Quoted By: >>9584764

Bandai needs to start reprinting regular releases again asap. The cheapest RG Force Impulse online is available for $60, it was $44 3 weeks ago. This is getting out of hand. Have there been any announcements etc on when they're going to resume production?

Anonymous

Anonymous Fri 28 Jan 2022 21:17:19 No.9584764 Report

Quoted By: >>9584794

>>9584736
they still are printing regular releases, check the monthly restock lists. the force impulse was just reprinted in last month

Anonymous

Anonymous Fri 28 Jan 2022 21:29:40 No.9584793 Report

Quoted By:

>>9583815
Yea kinda wierd they basically said fuck them leaf's

Anonymous

Anonymous Fri 28 Jan 2022 21:29:40 No.9584794 Report

Quoted By: >>9584819

>>9584764
So if I PO it at a reputed store it should be in stock soon? Thanks

Anonymous

Anonymous Fri 28 Jan 2022 21:45:34 No.9584819 Report

Quoted By:

>>9584794
the japanese stores like hlj will already have got their stocks, but if you mean a US or EU store then yes probably. bandai's restock list says it was sent out to retailers on the 20th of december so it likely hasn't reached the US or EU yet

Anonymous

Anonymous Fri 28 Jan 2022 23:29:36 No.9584986 Report

Quoted By: >>9585642

>>9583954
because shopee has a COD option. and flips and kelings still want to get their hands on the product first before paying for them.

Anonymous

Anonymous Sat 29 Jan 2022 01:17:59 No.9585137 Report

Quoted By: >>9585143

>>9583905
What??! You don't just want to buy $200+ Gundam jackets and bags?!

Anonymous

Anonymous Sat 29 Jan 2022 01:23:13 No.9585143 Report

Quoted By: >>9585155

>>9585137
I mean, I do, but I also want access to the toys that P-Bandai Singapore and etc. get. Like the Kamen Rider SHFs and stuff.

Anonymous

Anonymous Sat 29 Jan 2022 01:28:34 No.9585155 Report

Quoted By: >>9585170 >>9585643

>>9585143
The Flip store has the Ultraman and Kamen Rider SHFs tho. Just only pre-order ones though.

Anonymous

Anonymous Sat 29 Jan 2022 01:36:40 No.9585170 Report

Quoted By:

>>9585155
Oh my bad, I stumbled into this conversation halfway and thought we were talking about US P-Bandai.

Anonymous

View Same Google ImgOps iqdb SauceNAO G-Self_Core_Fighter_Cockpit.jpg, 117KiB, 1000x797

Anonymous Sat 29 Jan 2022 02:31:19 No.9585244 Report

Quoted By: >>9585250 >>9585272 >>9587097 >>9587641

>>9583945
okay first,this is the core fighter transformed docking to the G-self

Anonymous

View Same Google ImgOps iqdb SauceNAO YG-111_Gundam_G-Self_Rear_(Movie).png, 239KiB, 524x1123

Anonymous Sat 29 Jan 2022 02:36:47 No.9585250 Report

Quoted By: >>9585272 >>9587097 >>9587641

>>9583945
>>9585244
then this is the back of the G-Self
if you look at it, the G-Self Core Fighter docks at the stomach.

Anonymous

View Same Google ImgOps iqdb SauceNAO bye.png, 593KiB, 1024x576

Anonymous Sat 29 Jan 2022 02:51:49 No.9585272 Report

Quoted By: >>9585301 >>9585441 >>9587097 >>9587641 >>9588196

>>9583945
>>9585244
>>9585250
as evidenced by this G-Self core fighter launching off.

Bandai has to engineer a stomach that can house a core fighter also in there, with its back side can fully open-fold like origami like the show to accommodate the docking sequence

The engineering problems the MG would make Katoki spin in his grave even if he is still alive. The structural integrity would be worse than MG Victory or V2. there would be trade-offs or not make the dockable stomach at all, like the MG Sazabi head not really following the scale of the cockpit

its a normal robot design (I dont like it, its face is like Strike's retarded cousin and the body is stolen from the RX-78-2 Evolve episode) that would be better off as a Robot Damashi or just stay in HG form

Anonymous

Anonymous Sat 29 Jan 2022 03:17:31 No.9585301 Report

Quoted By:

>>9585272
Maybe give it the RE/100 treatment

Anonymous

Anonymous Sat 29 Jan 2022 05:25:11 No.9585441 Report

Quoted By: >>9585508

>>9585272
>make Katoki spin in his grave
he's still alive, anon

Anonymous

Anonymous Sat 29 Jan 2022 06:35:35 No.9585508 Report

Quoted By:

>>9585441
Did you even finish reading the sentence you are quoting

Anonymous

View Same Google ImgOps iqdb SauceNAO Rgm79gs-head.jpg, 18KiB, 249x290

Anonymous Sat 29 Jan 2022 07:39:33 No.9585576 Report

Quoted By:

>always thought there is supposed to be some colored camera behind the GM visor
>It is nothing but metal grey

My whole life has been a lie

Anonymous

Anonymous Sat 29 Jan 2022 09:26:11 No.9585642 Report

Quoted By:

>>9584986
Kek
From my experience, less than 1% item I received from online purchase is good and as advertised. Remind me of this moron who bought a drill bit but he thought he's gonna get the drill as well and complaining to the delivery guy and causing a scene.

Also Shopee is forced meme.

Anonymous

Anonymous Sat 29 Jan 2022 09:28:25 No.9585643 Report

Quoted By:

>>9585155
>Ultraman and Kamen Rider SHFs
Well of course
Not like they never promote Ultraman and Kamen Rider to US audience
Wtf Bandai, you have so much potential customers

Anonymous

View Same Google ImgOps iqdb SauceNAO f90.jpg, 321KiB, 687x990

Anonymous Sat 29 Jan 2022 10:40:20 No.9585702 Report

Quoted By: >>9586192 >>9586221

back from my local toy shop

someone didn't pickup their F90 preorder so I was able to snatch it up. gonna be semi serious on this since F90 is nostalgic for me as when I was a kid, I always stare at their window looking at that F90 FDS

Unfortunately, the preorder for Yukikaze is filled and my best hope is someone backed out of spending $200 on her

Anonymous

Anonymous Sat 29 Jan 2022 16:48:33 No.9585979 Report

Quoted By:

>>9576079
damn so if I wanna get some of these then I should do it soon

Anonymous

Anonymous Sat 29 Jan 2022 16:55:20 No.9585987 Report

Quoted By:

is the mg exia ver RM gonna happen?

Anonymous

Anonymous Sat 29 Jan 2022 16:59:28 No.9585990 Report

Quoted By:

>>9579914
Muh Bael

Anonymous

Anonymous Sat 29 Jan 2022 19:33:40 No.9586192 Report

Quoted By: >>9586301

>>9585702
How much $$$?

Anonymous

Anonymous Sat 29 Jan 2022 19:38:11 No.9586199 Report

Quoted By: >>9586278

>>9576082
Blah fucking blah. Just build your kits anon, you are makin far to big of a deal here ya goober

Gelgoog Guy !!XOac6frt+Ny

View Same Google ImgOps iqdb SauceNAO PXL_20220129_194425667.PORTRAIT (...).jpg, 1MiB, 1912x1440

Gelgoog Guy !!XOac6frt+Ny Sat 29 Jan 2022 19:51:00 No.9586221 Report

Quoted By:

>>9585702
It's a fun build. I finally got a chance to top coat mine last weekend and put it back together todya.

Anonymous

Anonymous Sat 29 Jan 2022 20:22:07 No.9586278 Report

Quoted By: >>9586294 >>9586587

>>9586199
Why are you responding to a week old discussion that already ended?

Anonymous

Anonymous Sat 29 Jan 2022 20:28:09 No.9586290 Report

Quoted By: >>9586294

>>9577996
NTA but I've built the 00 RGs and every single one of them had loose legs before they were done. No hamfisting no othersiteboogeyman, just lightly posing. Built the Crossbone and the Wing Zero and they didn't have any problems. If it was because of me they'd be loose too.
Anon didn't help his case by antagonizing but the cult-like defense of the old RG frames really is bizarre. Bandai ditched them for a reason.

Anonymous

Anonymous Sat 29 Jan 2022 20:30:39 No.9586294 Report

Quoted By:

>>9586290
>>9586278

Anonymous

View Same Google ImgOps iqdb SauceNAO sf7_25.jpg, 108KiB, 1464x700

Anonymous Sat 29 Jan 2022 20:32:40 No.9586301 Report

Quoted By:

>>9586192
55 usd equivalent

this whole F90 A-Z project is completely idiotic and already fell flat on its face. I'm still wondering why they haven't moved on to Silhouette Formula.

the Neo, Cluster, RXF91 and the RXF91 Kai all uses the base F90, just without the hardpoints

Anonymous

View Same Google ImgOps iqdb SauceNAO banshee.jpg, 116KiB, 993x1315

Anonymous Sat 29 Jan 2022 22:19:56 No.9586518 Report

Quoted By: >>9587000 >>9587075

How often does the MG Banshee get produced? This one specifically.

Anonymous

Anonymous Sat 29 Jan 2022 23:00:35 No.9586587 Report

Quoted By:

>>9586278
Because it is new to me since I just saw it? Also, because I wanted to

Anonymous

Anonymous Sun 30 Jan 2022 02:50:02 No.9587000 Report

Quoted By:

>>9586518
since Unicorn hype is dwindling down, I say, in a few years

Anonymous

Anonymous Sun 30 Jan 2022 03:54:37 No.9587075 Report

Quoted By:

>>9586518
dunno but i know my local hobby store has had some of those for a while. guess they arent fast movers.

Anonymous

Anonymous Sun 30 Jan 2022 04:05:47 No.9587097 Report

Quoted By: >>9587126 >>9587308

>>9585244
>>9585250
>>9585272
if the 00 MGs can store round GN drive in their abdomen i don't see why G-self MG cant

Anonymous

Anonymous Sun 30 Jan 2022 04:21:37 No.9587126 Report

Quoted By: >>9587308

>>9587097
The RG (and to a lesser extent the MG ver ka) crossbones both do it too

Anonymous

View Same Google ImgOps iqdb SauceNAO m207_15.jpg, 39KiB, 469x800

Anonymous Sun 30 Jan 2022 06:34:18 No.9587308 Report

Quoted By:

>>9587097
>>9587126
>clearly storing the GN drive in chest area
>supposedly storing the GN drive in the abdomen
You're being stupid on purpose, right?

V2, V, Crossbone, GP-01/GP-01 FB, G/Shining all dock their core fighters in the chest area

Impulse, RX-78, Narrative, ZZ, S have the core fighter take up the whole upper body

Turn A puts its core fighter outside

G-Self is the only one whose core fighter goes straight to the stomach. Bandai will have to engineer a landing rail that folds out so the core fighter can land, where the back folds out so the core fighter can dock. its an engineering nightmare at 1/100

Anonymous

View Same Google ImgOps iqdb SauceNAO m190_19.jpg, 37KiB, 543x600

Anonymous Sun 30 Jan 2022 06:36:23 No.9587309 Report

Quoted By: >>9587609

the only way to make a G-Self in MG is like the Gundam Origin, completely ignore that there should be a core fighter

Anonymous

Anonymous Sun 30 Jan 2022 09:05:23 No.9587457 Report

Quoted By: >>9587480 >>9587901 >>9588903

>>9574196
New to the hobby, checked out the (very helpful) guide in the OP. Is there any bit of advice or stuff to know that's not already included that would be handy to know?

Anonymous

Anonymous Sun 30 Jan 2022 09:32:23 No.9587480 Report

Quoted By: >>9587513

>>9587457
stop reading shit and actually do shit.

Anonymous

Anonymous Sun 30 Jan 2022 10:14:07 No.9587513 Report

Quoted By:

>>9587480
This.

Anonymous

Anonymous Sun 30 Jan 2022 12:08:24 No.9587609 Report

Quoted By: >>9587616 >>9587733

>>9587309
>completely ignore that there should be a core fighter
unlike in proper UC the rx-78 in gundam the origin doesn't have a core block system, so the mg isn't ignoring anything

Anonymous

View Same Google ImgOps iqdb SauceNAO PC011832.jpg, 42KiB, 640x480

Anonymous Sun 30 Jan 2022 12:18:04 No.9587616 Report

Quoted By: >>9587655

>>9587609
yes it does. the GFF metal composite has the core fighter gimmick. the MG didnt because they said the origin version is focused on articulation

Anonymous

Anonymous Sun 30 Jan 2022 12:39:13 No.9587641 Report

Quoted By:

>>9583398
>>9585244
>>9585250
>>9585272
No one cares about this, if they remove corefighter but leave opening cockpit then probably no one even notice it. Besides, it won't be a first time something is omitted from MG's features

Anonymous

View Same Google ImgOps iqdb SauceNAO 20220119_091332.jpg, 2MiB, 4000x2250

Anonymous Sun 30 Jan 2022 12:56:54 No.9587655 Report

Quoted By:

>>9587616
No. The origin gundam does not have a core fighter at first and only gets it after the jaburo battle. So only the late type rx 78 has the core fighter for the origin version.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1638731873356.jpg, 81KiB, 441x396

Anonymous Sun 30 Jan 2022 14:38:05 No.9587733 Report

Quoted By: >>9587744 >>9587769

>>9587609
The real question is, is the core block is even a viable concept now? Hiding a small plane inside an MS sounds like a very complicated thing that can be replaced with a simple Ball like system, So just a cockpit with some boosters to flee the battle and back to the base.

Anonymous

View Same Google ImgOps iqdb SauceNAO Atlas_Gundam_Torso.jpg, 36KiB, 400x356

Anonymous Sun 30 Jan 2022 14:46:03 No.9587744 Report

Quoted By: >>9589479

>>9587733
Or you can make Atlas gundam

Anonymous

Anonymous Sun 30 Jan 2022 15:09:01 No.9587769 Report

Quoted By: >>9587958

>>9587733
that's basically what they switched to after the OYW. the 360° panoramic cockpits double as an escape pod, you see them used at the end of zeta (when yazan escapes) and in cca just off the top of my head (but i'm sure there's more examples)

Anonymous

Anonymous Sun 30 Jan 2022 16:55:57 No.9587901 Report

Quoted By: >>9587920

>>9587457
Best beginner advise I have- git gud with a hobby knife for nub clean-up. Make sure you always have a fresh blade, its my go to, and since your a beginner its easier then sanding for nub clean-up because its very easy to oversand and leave marks. Be aware though- you will cut yourself but thats ok, your blood sacrifice pleases the god known as Plamo.

Anonymous

Anonymous Sun 30 Jan 2022 17:00:57 No.9587920 Report

Quoted By: >>9589087 >>9589143

>>9587901
>Be aware though- you will cut yourself
cut away from yourself and you won't. i have never cut myself on my hobby knife

Anonymous

Anonymous Sun 30 Jan 2022 17:13:10 No.9587944 Report

Quoted By: >>9588011

Have the HGUC #241 Zaku II kits started shipping yet for anyone else here in the West? I've had a preorder for one since December and still no word.

Anonymous

View Same Google ImgOps iqdb SauceNAO Popped His Cockpit.gif, 2MiB, 400x225

Anonymous Sun 30 Jan 2022 17:18:25 No.9587958 Report

Quoted By:

>>9587769

Anonymous

View Same Google ImgOps iqdb SauceNAO 20220127_130504.jpg, 2MiB, 4000x2250

Anonymous Sun 30 Jan 2022 17:43:57 No.9588011 Report

Quoted By: >>9588135

>>9587944
Found 2 at a local hobby shop. Havent seen any come in stock online anywhere. Here it is next to the old zaku, from the ground war set.

Anonymous

Anonymous Sun 30 Jan 2022 18:59:23 No.9588135 Report

Quoted By: >>9588940

>>9588011
Old one has much better proportions

Anonymous

Anonymous Sun 30 Jan 2022 19:26:24 No.9588196 Report

Quoted By: >>9588257

>>9585272
>The engineering problems the MG would make Katoki spin in his grave even if he is still alive
Katoki doesn't do engineering, he's a designer and draftsman. He got his start in the anime industry as a doujin artist.

Anonymous

Anonymous Sun 30 Jan 2022 19:40:52 No.9588233 Report

Quoted By: >>9588237 >>9588265

Looking to get into airbrushing but the guide doesn't really go into detail about how siphon vs gravity feed work or which is better depending on your personal factors.

Gelgoog Guy !!XOac6frt+Ny

Gelgoog Guy !!XOac6frt+Ny Sun 30 Jan 2022 19:42:42 No.9588237 Report

Quoted By: >>9588265

>>9588233
You are never going to want a siphon feed for model work.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1643167702515.jpg, 657KiB, 1598x1080

Anonymous Sun 30 Jan 2022 19:50:55 No.9588257 Report

Quoted By:

>>9588196
>He got his start in the anime industry as a doujin artist.
I want to see his drawings of sexy robots

Anonymous

View Same Google ImgOps iqdb SauceNAO grafo-t2-02-mm~2.jpg, 82KiB, 1200x900

Anonymous Sun 30 Jan 2022 19:55:28 No.9588265 Report

Quoted By: >>9588337

>>9588233
You can use google to find out what the differences are.
Main point: siphon needs a jar of paint to suck from, gravity can start spraying with one drop. Most of the time you don't need to spray a lot of paint in this hobby.

>>9588237
Never say never. If you have to spray a lot of the same color on a large-scale model, siphon could be useful if you already have it. It's just that truly large-scale jobs are too rare to justify buying it.

Gelgoog Guy !!XOac6frt+Ny

Gelgoog Guy !!XOac6frt+Ny Sun 30 Jan 2022 20:31:55 No.9588337 Report

Quoted By: >>9588500

>>9588265
Yeah, perhaps I should've clarified anything outside commercial work. I'm sure there's some stupid sized model kits out there in the thousands of dollar range where you could justify it, but frankly gravity feed is just easier to deal with for 99% of situations with models.

Anonymous

View Same Google ImgOps iqdb SauceNAO zs_01.jpg, 847KiB, 2478x1200

Anonymous Sun 30 Jan 2022 22:07:33 No.9588500 Report

Quoted By:

>>9588337
>stupid sized model kits out there in the thousands of dollar range
Nah.

Anonymous

Anonymous Mon 31 Jan 2022 01:41:25 No.9588903 Report

Quoted By:

>>9587457
If you're doing simple shit on the level of a Minipla like I do, you want the following-
>your nippers. Xuron are perfectly fine until you get to high level stuff
>a craft knife. Get a cheap x-acto, or just one of those clicky ones that you snap the dull blade off.
>tweezers with a light resistance. You just barely want to be holding any decals.
>hands free magnification. One that's bolted to your desk, or a headpiece. Helps you apply decals and trim nubs
>a good light source. A good reading lamp will do fine.

Anonymous

Anonymous Mon 31 Jan 2022 02:10:05 No.9588940 Report

Quoted By: >>9589458

>>9588135
Touch grass.

Anonymous

Anonymous Mon 31 Jan 2022 04:22:07 No.9589087 Report

Quoted By: >>9589428

>>9587920
Plamo demands your blood anon. In return he will bless you with perfect masking jobs, no orange peel and excellent seam-welds

Anonymous

Anonymous Mon 31 Jan 2022 05:24:25 No.9589143 Report

Quoted By: >>9589147 >>9589153 >>9589404 >>9589405 >>9589428 >>9589505

>>9587920
i cut towards myself (i get better control and able to apply more pressure) and i've never cut myself with a hobby knife.

i always cut myself when building a kotobukiya kit though, but not because of the knife.

Gelgoog Guy !!XOac6frt+Ny

Gelgoog Guy !!XOac6frt+Ny Mon 31 Jan 2022 05:27:46 No.9589147 Report

Quoted By:

>>9589143
>i always cut myself when building a kotobukiya kit though, but not because of the knife.

It's a curse I tell you what.

Anonymous

Anonymous Mon 31 Jan 2022 05:28:37 No.9589153 Report

Quoted By: >>9589405 >>9589428

>>9589143
You know the blood sacrifice jokes are a meme, right? You don't have to intentionally cut yourself to give your daughters life. They'll be alive in your heart no matter what.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1624266001670.jpg, 43KiB, 857x448

Anonymous Mon 31 Jan 2022 06:45:46 No.9589270 Report

Quoted By: >>9589928 >>9591748

i like mecha's nails ;3

not his voice tho

Anonymous

View Same Google ImgOps iqdb SauceNAO cosmonami.png, 1MiB, 572x883

Anonymous Mon 31 Jan 2022 07:02:23 No.9589279 Report

Quoted By:

>>9581633
ive been doing double mastectomies ever since my cosmonami

Anonymous

Anonymous Mon 31 Jan 2022 09:05:24 No.9589404 Report

Quoted By:

>>9589143
If I have to cut towards my hands at all I just aim it so that it hits one of my fingernails if it slips

Anonymous

Anonymous Mon 31 Jan 2022 09:05:28 No.9589405 Report

Quoted By: >>9589429

>>9589143
>>9589153
Do any of you still have that sequential comic with photos about how to build a model kit and the guy start cutting his fingers multiple time until his hands and the table slowly getting soaked with blood and the guy died midway and his friend found his corpse and screaming while the text keep talking about the process of building a model kit?

It was an old pic, maybe from 2015 or older and it's hilarious af.

Anonymous

View Same Google ImgOps iqdb SauceNAO mETK9G4.jpg, 551KiB, 540x4845

Anonymous Mon 31 Jan 2022 09:51:56 No.9589428 Report

Quoted By:

>>9589087
>>9589143
>>9589153

Anonymous

Anonymous Mon 31 Jan 2022 09:52:58 No.9589429 Report

Quoted By:

>>9589405
No worries I found it

Anonymous

View Same Google ImgOps iqdb SauceNAO 20220127_130334.jpg, 2MiB, 4000x2250

Anonymous Mon 31 Jan 2022 10:16:53 No.9589458 Report

Quoted By: >>9590521

>>9588940
I kind of agree with that anon.

Anonymous

Anonymous Mon 31 Jan 2022 10:45:22 No.9589479 Report

Quoted By:

>>9587744
The final evolution of the Ball.

Anonymous

Anonymous Mon 31 Jan 2022 11:11:06 No.9589505 Report

Quoted By:

>>9589143
>i get better control and able to apply more pressure
if you practice cutting away from yourself you can get just as good control and pressure as towards yourself. i have better control cutting away than towards now because i stuck with it

Anonymous

Anonymous Mon 31 Jan 2022 18:00:46 No.9589928 Report

Quoted By: >>9590373 >>9590636

>>9589270
wish i could paint model kits as easily as i can paint my nails bruh. He probs has his wife do them for him though.

Anonymous

View Same Google ImgOps iqdb SauceNAO lascivus.jpg, 764KiB, 1600x919

Anonymous Mon 31 Jan 2022 18:51:24 No.9590019 Report

Quoted By:

Before we knew it, Lascivus has grown into quite a lineup.

Anonymous

View Same Google ImgOps iqdb SauceNAO 20220131_143054_copy_1152x694.jpg, 183KiB, 1152x694

Anonymous Mon 31 Jan 2022 19:38:56 No.9590081 Report

Quoted By: >>9590114

For anyone considering getting a gardevoir kit and headswapping it onto a more articulated kit here is it next to a 30MS, figurerise, Frame arms girl, and a hgbf kit. Proportionally based on its head size I think the FAG and the figurerise work best with it. The hgbf kits are pretty big in size and the 30ms kits feel a bit to petite and while it doesn't look the worst on them there are better options.

Anonymous

View Same Google ImgOps iqdb SauceNAO xKwDwwW[1].jpg, 284KiB, 1600x1200

Anonymous Mon 31 Jan 2022 19:57:48 No.9590114 Report

Quoted By:

>>9590081
Maybe try a Megami Device or other Machineca-based kit, they're generally smaller and slimmer than FAGs.

Anonymous

Anonymous Mon 31 Jan 2022 22:43:52 No.9590373 Report

Quoted By: >>9590636

>>9589928
Pretty sure it is his wife in the videos while he does the voice overs. That ornhe has some soft ass hands.

Anonymous

Anonymous Mon 31 Jan 2022 23:29:16 No.9590432 Report

Quoted By: >>9590437

>>9574885
i'm a retarded newfag, is that char's zaku a 1:144 or 1:100 kit?

Anonymous

Anonymous Mon 31 Jan 2022 23:31:26 No.9590437 Report

Quoted By:

>>9590432
1:144
It's the HGUC Revive.

Anonymous

Anonymous Tue 01 Feb 2022 00:07:51 No.9590521 Report

Quoted By: >>9590625

>>9589458
what are those buildings? looks great anon

Anonymous

View Same Google ImgOps iqdb SauceNAO 1629382509872.jpg, 813KiB, 2000x1333

Anonymous Tue 01 Feb 2022 00:54:00 No.9590598 Report

Quoted By: >>9590625

This guy was a fun build and I like how he moves, but whoever had the idea of giving a GM a big shield with no means of mounting it needs slapped. How many times have you seen mounted shields and not thought too much about it? Making a GM kit where the gimmick is the shield and the only way to hold it is a wobbly handle that separates the hand parts just seems like such a brain dead decision.

Anonymous

View Same Google ImgOps iqdb SauceNAO extrapieces.png, 499KiB, 450x650

Anonymous Tue 01 Feb 2022 01:06:47 No.9590615 Report

Quoted By: >>9590625

I built a heavyarms and after building everything in the instructions there are still pieces in the B1 and B2 plastic sheets
I skimmed through the instructions a second time but didn't see these pieces anywhere
what are these pieces for?
and do I need to take him apart to fix it?
I've only built two 1/144 gundams before this and neither have had extra pieces so I'm worried I messed up

Anonymous

Anonymous Tue 01 Feb 2022 01:11:57 No.9590625 Report

Quoted By: >>9590637 >>9590656

>>9590615
Look at the first section where it has the runners on it. Any part that has an X will not be used. Alot of these kits share many parts so a runner having leftovers isnt a strange thing.

>>9590521
Tomytec buildings.

>>9590598
Waiting for my preorder for this to come in stock. Ditch that shield and give it a regular feddy shield.

Anonymous

View Same Google ImgOps iqdb SauceNAO 1632971758066.jpg, 64KiB, 889x453

Anonymous Tue 01 Feb 2022 01:16:39 No.9590636 Report

Quoted By: >>9590951 >>9591409

>>9589928
>>9590373
motherfucker just has soft hands

i bet they feel nice ;]

https://www.youtube.com/watch?v=gRqzQS_qu0E

Anonymous

View Same Google ImgOps iqdb SauceNAO 1613328202298.jpg, 715KiB, 1333x2000

Anonymous Tue 01 Feb 2022 01:16:39 No.9590637 Report

Quoted By: >>9590951

>>9590625
>Ditch that shield and give it a regular feddy shield.
I just took a spare hand that was knocking about and cemented it together around the handle. So I can use the shield if I want to, but it's a nuisance. Just gonna stick to Beam Spray Gun and ice-pick grip Beam Dagger.

Anonymous

Anonymous Tue 01 Feb 2022 01:25:40 No.9590656 Report

Quoted By: >>9590951

>>9590625
that is what it was, thank you

Anonymous

View Same Google ImgOps iqdb SauceNAO 20211204_175103.jpg, 3MiB, 4000x2250

Anonymous Tue 01 Feb 2022 04:20:59 No.9590951 Report

Quoted By:

>>9590637
>Just gonna stick to Beam Spray Gun and ice-pick grip Beam Dagger
Yes. I love that the gm guard is like the pixy got knocked up by a gm sniper 2 white dingo.

>>9590636
>i bet they feel nice ;]
>no femtwink with soft hands to build gunpla with
>soft touch running up your long backlog of MG kits.
>oops I dropped a PC-4 on your lap, I need that part. Let me pick it up
>teehee it keeps rolling around
>mfw this makes his next video

>>9590656
Not a prob bob. Take your time building and get a little confidence and youll be doing great. Keep learning and trying to improve. Not to impress us but to hone your skills and satisfy yourself. Get the deathscythe if you haven't already.

Anonymous

Anonymous Tue 01 Feb 2022 11:51:47 No.9591409 Report

Quoted By: >>9591749

>>9590636
Gaaaaaayyyyyyyyyyyyyyyyyyyyyiieee

Anonymous

Anonymous Tue 01 Feb 2022 16:30:24 No.9591723 Report

Quoted By: >>9592013 >>9592098

I bought my first rg sinanju. What am I in for?

Anonymous

Anonymous Tue 01 Feb 2022 16:47:08 No.9591748 Report

Quoted By:

>>9589270
His voice isn't bad when he drops the YOUtube PERsonality bullshit.

Anonymous

Anonymous Tue 01 Feb 2022 16:47:16 No.9591749 Report

Quoted By: >>9591780

>>9591409
imagine his hand gently stroking your shaft while the other is caressing your balls
can you honestly say that it wouldn't feel good? protip: you can't

Anonymous

Anonymous Tue 01 Feb 2022 17:06:49 No.9591780 Report

Quoted By:

>>9591749
I don't expect a hamhand to be able to do anything gently.

Anonymous

View Same Google ImgOps iqdb SauceNAO 27abc128-c9eb-42d6-a9b2-c254684e (...).jpg, 57KiB, 750x750

Anonymous Tue 01 Feb 2022 17:28:24 No.9591826 Report

Quoted By: >>9591900

Just curious, does the Team Bright version of the RG Gundam fix any of the issues the original version has? I like the colors of this one a lot more than the standard look

Anonymous

Anonymous Tue 01 Feb 2022 18:04:42 No.9591900 Report

Quoted By:

>>9591826
No. It is literally just a recolor.

Anonymous

Anonymous Tue 01 Feb 2022 19:07:34 No.9592013 Report

Quoted By:

>>9591723
a Gundam Mk II with addon parts that are a bit too heavy for it to support itself, but looks ok if you balance it juuuuust right on a stand

Anonymous

Anonymous Tue 01 Feb 2022 19:56:39 No.9592098 Report

Quoted By:

>>9591723
Interesting build and gorgeous finish out of the box, but a pain in the ass to handle once it's finished.

Anonymous

Anonymous Tue 01 Feb 2022 22:01:49 No.9592309 Report

Quoted By: >>9592316

I know this is a board for "toys" and Gunpla, but anyone here have experience building military scale? I'm tempted to buy one of those massive 1/350 scale warships and try to tackle it, but I am not an extremely experienced modeler. I've tackled military scale before, and done an OKAY job on some smaller less-detailed ships. How difficult are they, generally?

Anonymous

Anonymous Tue 01 Feb 2022 22:06:48 No.9592316 Report

Quoted By: >>9592325

>>9592309

>>9584169 might be what you're looking for

Anonymous

Anonymous Tue 01 Feb 2022 22:09:57 No.9592325 Report

Quoted By:

>>9592316
shit my bad it's been years since I've been here

Anonymous

Anonymous Wed 02 Feb 2022 02:20:54 No.9592839 Report

Quoted By: >>9592977 >>9592995 >>9593051

>haven't made any kits in a few years
>browsing BBTS
>see that they have a Gundam section
>preorders are open for a bunch of figures
ah shit, I'm tempted to bite the bullet...
Are MG Guncannon and MG Turn A good?I've never made an MG before, but these two were some if my biggest desires back when I got super into Gunpla.
Any other recommendations, either in general or BBTS preorders? I remember hearing that the HG Loto 2-pack is a fun one, and I saw that available on BBTS.

Anonymous

View Same Google ImgOps iqdb SauceNAO rg29_70.jpg, 128KiB, 666x750

Anonymous Wed 02 Feb 2022 03:40:40 No.9592977 Report

Quoted By:

>>9592839
Guncannon is very old and outdated. If you want a good modern Guncannon, get the HGUC Revive. It's small, around 5" tall, but it's a much better kit overall. If you must have something large, maybe look at RE/100 Guncannon Detector.

I've heard MG Turn A is pretty darn good.

The de-facto impressive kits right now are the RG Sazabi, RG Nu, and most of all, the RG Hi-Nu. Any of those will blow your goddamn mind. If you want something huge and impressive, MG Sazabi Ver.KA. MG Alex, ZZ, and Barbatos have also been very cool in recent years.

Anonymous

Anonymous Wed 02 Feb 2022 03:47:05 No.9592995 Report

Quoted By:

>>9592839
MG Guncannon is great as is MG Turn A. Still holds up.

Anonymous

Anonymous Wed 02 Feb 2022 04:27:55 No.9593051 Report

Quoted By: >>9593057

>>9592839
>BBTS
BBTS pre-orders are about as good as hope and a prayer. Chances are unless it's something new you're never going to see it. If you are in the US try Gundam Planet, Newtype, Gundam Pros, & Galactic Toys. Hobby Link Japan is also excellent but then you gotta deal with international shipping.

Gelgoog Guy !!XOac6frt+Ny

Gelgoog Guy !!XOac6frt+Ny Wed 02 Feb 2022 04:28:04 No.9593052 Report

Quoted By:

New thread: >>9593038

Anonymous

View Same Google ImgOps iqdb SauceNAO shaggy.jpg, 237KiB, 1280x853

Anonymous Wed 02 Feb 2022 04:33:38 No.9593057 Report

Quoted By: >>9593065

>>9593051
>all these sites and more have RG Sazabi out of stock
>except for BBTS

Anonymous

Anonymous Wed 02 Feb 2022 04:37:58 No.9593065 Report

Quoted By:

>>9593057
>ignores the part where I said pre-orders

Capcode	All Only User Posts Only Verified Posts Only Moderator Posts Only Manager Posts Only Admin Posts Only Developer Posts Only Founder Posts
Show Posts	All Only With Images Only Without Images Only Spoiler Images Only Non-Spoiler Images
Deleted Posts	All Only Deleted Posts Only Non-Deleted Posts
Ghost Posts	All Only Ghost Posts Only Non-Ghost Posts
Post Type	All Only Sticky Threads Only Opening Posts Only Reply Posts
Results	All Grouped By Threads
Order	Latest Posts First Oldest Posts First

On these archives

Your latest searches

Welcome to the Gunpla/Plamo General